Wire & Cup Brushes

Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 12• End Type: Flat End• Wire: 0.30 Steel

This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diameter: 50mm.Additional Information:• Diameter (mm): 50• Wire: Crimped Steel• Shank (mm): 6

This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 50• Wire: 0.30 Crimped Steel

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 12• End Type: Pointed End• Wire: 0.30 Steel

Brassed crimped steel wire with 6mm diameter shank. Display packed.

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 25• End Type: Flat End• Wire: 0.30 Steel

• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:Diameter: ø50mmMaximum Speed: 4500rpmNett Weight: 0.05kgShaft Diameter: ø6mmDimensions: Length: 30mm x Height: 150mmWeight: 0.054KgWarranty: Consumable

• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:Nett Weight: 0.06kgTrim Diameter: 25mmTrim Length: 28mmDimensions: Length: 35mm x Height: 140mmWeight: 0.072KgWarranty: 1 year

This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diameter: 75mm.Additional Information:• Diameter (mm): 75• Wire: Crimped Steel• Shank (mm): 6

Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.

• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:Diameter: ø75mmMaximum Speed: 4500rpmNett Weight: 0.08kgShaft Diameter: 6mmDimensions: Length: 40mm x Height: 149mmWeight: 0.08KgWarranty: Consumable

• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 20mm Shaft.• Trim Length/ø: 20/13mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity. ø6 x 20mm Shaft.• Flat trimmed brush with brassed and crimped filaments for extra rigidity. • ø6 x 20mm Shaft. • Trim Length/ø: 20/13mm. • Model No. VS1802Technical Specification:Nett Weight: 0.02kgTrim Diameter: 13mmTrim Length: 20mmDimensions: Length: 13mm x Height: 127mmWeight: 0.026KgWarranty: Consumable

This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 75• Wire: 0.30 Crimped Steel

• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø50mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 50mm width and a 6mm shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Width: ø50mm. • Maximum Speed: 4500rpm. • Model No. SFBS50Technical Specification:Diameter: 50mmMaximum Speed: 4500rpmNett Weight: 0.03kgShaft Diameter: 6mmDimensions: Length: 40mm x Height: 152mmWeight: 0.052KgWarranty: Consumable

This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diameter: 100mm.Additional Information:• Diameter (mm): 100• Wire: Crimped Steel• Shank (mm): 6

Brassed crimped steel wire with 6mm diameter shank. Display packed.

• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power drills. • ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SCB50Technical Specification:Diameter: 50mmMaximum Speed: 4500rpmNett Weight: 0.06kgShaft Diameter: 6mmDimensions: Length: 65mm x Height: 150mmWeight: 0.082KgWarranty: Consumable

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Additional Information:• Diameter (mm): 23• End Type: Pointed End• Wire: 0.30 Steel

Fine Finish on Steel - The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium-duty cleaning applications. It is suitable for removing coatings, rust and paint on small-to-medium steel and non-ferrous metal surfaces. This brush is also suitable for roughing, mat sanding, and paint stripping, as well as cleaning formwork boards and facings on metal and wood. It is intended for use with drills The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet …

• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power drills. • ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SCB75Technical Specification:Diameter: 75mmMaximum Speed: 4500rpmNett Weight: 0.13kgShaft Diameter: ø6mmDimensions: Length: 75mm x Height: 150mmWeight: 0.06KgWarranty: Consumable

Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications.The FAIWBC60 Wire Cup Brush has the following specifications: Wire: Steel. Type: Cup. Face Diameter: 60mm. Thread: M14 x 2. Wire: 0.3mm. Conforms to ISO 9001 and DIN EN1083-1 and 2. Maximum speed: 12,500 rpm.Additional Information:• Diameter (mm): 60• Thread: M14• Wire: 0.30 Steel

Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium-duty cleaning applications. It is suitable for removing coatings and rust and for cleaning formwork boards and facings. Ideal for use on steel surfaces, this brush is also suitable for roughing, mat sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Cylindrical shank compatible with three-jaw drill chucks.…

Brassed crimped steel wire with 6mm diameter shank. Display packed.