125 mm cutting discs

The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …

The Faithfull Professional Trade Level Diamond Blade with 10mm sintered segments allowing for a longer working life and less blade changes. The aerated core allows for better cutting performance and aids cooling. Ideal for cutting materials of medium hardness commonly found on the worksite such as class B engineering bricks, concrete kerbs, concrete lintels and beams, reinforced concrete, building blocks, roofing tiles, 30-60 newton block paviours, York stone, concrete pipes and other less abrasive materials.Blade Diameter: 125mm.Bore Size: 22.2mm.Segment Height: 10mm.Additional Information:• Diameter: 125mm• Bore: 22.2mm

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …

The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate. Blade Diameter 125mm Bore Size 22.2mm Segment Height 10mm.

Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonded for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Fine (80 Grit)Bore. 22.23mmAdditional Information:• Size: 127mm• Grade: Fine

Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonded for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Medium 60 GritBore 22.23mm Additional Information:• Size: 127mm• Grade: Medium

Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.

Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 80Additional Information:• Size: 125mm• Grade: Medium Fine

Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cutting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm

Heavy duty depressed centre grinding disc. Specifications • Grit: A24R-BF • Bore: 22.23 mm • Diameter: 125 mm • Thickness: 6 mm • Pack Quantity: 1

A27 series Pro Metal grinding discs for angle grinders. Specifications • Diameter: 125mm • Quantity: 1

Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stearic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …

A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Specifications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasingFeatures & Benefits• Flat centre cutting disc • Ideal for cutting steel

Makita Comet Diamond Cutting Blade Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting. Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement. Ideal for use on porcelain and ceramic tiles. Features & Benefits • Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting • Smooth cut • Suitable for porcelain and ceramic tile • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement Specifications • Diameter: 125mm • Segment Height: 5mm • Bore: 22.23mm • Pack Quantity: 1

Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1

The Makita A60V Thin Stainless Steel Cutting Discs are expertly crafted for precision cutting of stainless steel and other metals. Featuring a thin 1mm profile, these discs ensure fast, clean cuts with minimal material loss and reduced burr formation, making them ideal for detailed metalwork. Constructed with high-quality materials, the Makita A60V discs offer exceptional durability and long-lasting performance. Their superior bonding and advanced grain technology provide consistent cutting power, ensuring optimal results throughout the disc's lifespan. Designed for use with angle grinders, these versatile cutting discs are perfect for a wide range of metal cutting applications. Specifications …

These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mmContents• 10 Discs

Fast cutting discs ideal for improved runtime when used with cordless angle grinders. Specifications • Diameter: 125mm • Pack Quantity: 1

The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everytime. Specifications: • Blade Diameter: 125mm • Bore Size: 22.23mm • Thickness: 1.2mmFeatures & Benefits• Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes

The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …

These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for safe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal

Milwaukee Drywall / Plasterboard Reciprocating Saw Blades. Precision forming process creates sharper teeth for fast cutting. Bi-metal teeth for greater durability and has a plunge tip for fast and effortless plunging. Suitable for special applications such as drywall and plasterboard. Specifications • Blade Length: 125mm • Teeth per Inch: 6 • Plunge Cut: Yes • Pack Quantity: 5Features & Benefits• Precision forming process creates sharper teeth for fast cutting • Bi-metal teeth for greater durability • Plunge tip for fast and effortless plunging • Suitable for special applications such as drywall and plasterboard

The Milwaukee Pro+ Thin Metal Cutting Discs are iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4mm) and acid-resistant steel, hardox, heat-resistant cast steel, spring steel, mild and tool steel. Features & Benefits • 50% less cutting time and 50% less dust than standard 3 mm thick discs. • Lower material loss. Specifications • Bore Size: 22.2mm • Disc Diameter: 125 • Thickness: 1mm • Pack Quantity: 10

The CorePlus Elite General-Purpose Diamond Blade features an Elite Endurance diamond metal matrix that extends the lifetime of the blade way beyond expectation. A precision-engineered, hardened, high-grade 65Mn manganese steel tensioned core ensures the blade runs true. Double laser welding technology reduces the risk of damaged segments, combined with the maximum concentration of ultra-grade diamond that has been meshed within the bond. It also features a state-of-the-art, metallurgically engineered, high-performance and long-life bond formulation that ensures maximum durability and lifetime. Manufactured to EN 13236 quality standard. oSa® certified to the highest level of quality and tested …