Drill Bits

Bosch Expert SelfCut Speed Spade Bit 12mm x 152mm - Efficient Wood Drilling
If you're in search of the quickest and most efficient way to bore precise holes in wood, the Bosch EXPERT SelfCut Speed Spade Bit is your answer. Bosch's advanced Tip Technology, featuring a self-feeding thread, effortlessly propels the bit into the wood, significantly reducing your drilling effort while delivering impeccable results at high speed. The uniquely crafted wave-shaped spade design of the Bosch EXPERT Spade Bit ensures rapid and efficient chip removal. Say goodbye to clogs and delays, even when drilling through dense wood. Crafted from high-quality steel, this spade bit boasts durability that lasts. Th…

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 5.0mm • Overall Length: 116mm • Working Length: 52mm • Quantity: 1

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless …

Dewalt DT4762 Extreme Impact Flatwood Drill Bit 10mm x 152mmThe Dewalt DT4762 has a 10mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and chamfered outer cutting spurs for razor-sharp, clean precise drilling.Features:
- Ideal for door locks, electrical and plumbing workSpecification:
- Cutting Diameter: 10mm 
- Length: 152mm
- Pack Quantity: 1

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 6mm • Length: 200mm • Pack Quantity: 1Features & Benefits• For use with Concrete,…

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

The CYL-9 MultiConstruction Drill Bit delivers stable drilling in all kinds of materials. Its centring tip provides a steady drilling start and good guidance universally. The diameter-optimised AWB brazing and hardening technology increases the robustness of the 2-cutter drill bit and reduces vibration during use. Additionally, the bit's 4-flute dura design with a reinforced core section delivers better wear resistance and stability when drilling soft concrete. The bit is intended for practically all materials in interior fitting work, e.g. soft concrete, masonry, brick, cement asbestos, light building materials, multilayer materials, ceramics and tiles, wood, plastic, sheet metals and aluminium.…

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 6 x 152mmAdditional Information:• Diameter: 6mm• Overall Length: 152mm• Pack Qty.: 1

The SDS plus-3 Drill Bit offers durability when drilling in concrete. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. Highly durable tungsten carbide tip for a long lifetime and good wear resistance 4-flute dura design provides effective dust removal for increased endurance High-alloy steel produced with optimised hardening technology to withstand wear Centering tip for a precise driling start and good guidance in the drilled hole Highly durable tungsten carbide tip for a long lifetime and good wear resistance 4-flute dura design provides effective dust removal for increased endurance High-alloy steel produced with optimised hardening …

IRWIN Blue Groove 6X Drill Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 16 mm.Length : 165 mm.Additional Information:• Diameter: 16mm• Overall Length: 165mm• Pack Qty.: 1

Drills for professional use. Tungsten carbide tip for strength and durability. Fits to all machines with SDSplus or Hilti-chucks. For use in concrete, brick and masonry. Specially designed flutes for fast efficient dust removal. TMS treatment provides stress relief for superior strength.

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant …

This Milwaukee HSS-G THUNDERWEB Metal Drill Bit has the following specification: Diameter: 4.0mmWorking Length: 43mmOverall Length: 75mmPack Size: 2 Note: Image is for illustrative purposes only and may differ from the actual product

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed.

This Milwaukee HSS-G THUNDERWEB Metal Drill Bit has the following specification: Diameter: 2.0mmWorking Length: 24mmOverall Length: 49mmPack Size: 2 Note: Image is for illustrative purposes only and may differ from the actual product

Expert Quality, long series HSS drill bits, manufactured to DIN 340 ISO 494 specifications. Display packed.

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 855/1 TH SB bits, PZ 1 x 25 mm, 2 pieces; 2x 855/1 TH bits: PZ 1x25

Irwin Speedhammer Plus Drill Bit.Specifications:Diameter: 3.5mmTotal length: 110mm.Working length: 50mm.

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 855/1 TH SB bits, PZ 3 x 25 mm, 2 pieces; 2x 855/1 TH bits: PZ 3x25