Car Pumps & Compressors

Die-cast body and dial type gauge with rubber protector. Fitted with single clip-on connector.Tyre Inflator with Clip-On Connector• Die-cast body and dial type gauge with rubber protector.• Fitted with single clip-on connector.• Range: 0-10bar(0-145psi).• 1/4BSP Air inlet.• Model No. SA924Model No: SA924:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 12bar(175psi):Minimum Air Supply: 3psi:Nett Weight: 0.36kg:Range: 0-10bar(0-145psi):PTDSEASA924

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.8mm Bore Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.• Model No. PCL8SModel No: PCL8S:Brand: Sealey:Description: Straight Swivel - 8mm(5/16) Bore:Nett Weight: 0.035kg:PTDSEAPCL8S

Emergency tyre sealant refill with hose for Sealey Model No. MAC10S. Can seal a puncture up to Ø6mm. Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair. Suitable for cars, vans and 4x4s.

TRUSTED: Suitable for all makes and models, the ResQ Inflator provides powerful and reliable tyre inflation for when needed. AirMan products are made to the highest OEM standards and approved by leading vehicle manufacturers SIMPLE: Our compressor uses a high quality, workshop specification analogue gauge to give accurate readings. No fancy digital gauges to go wrong or misread, just simple no-nonsense readings every time. CONVENIENT: Supplied with a compact case, the ResQ weighs only 855g and measures a small 150 x 140 x 61mm to fit in glove boxes, under seats or in the boot. The long power cable measures 3 meters long to provide access to all tyres EASY TO USE: Simply plug in the 12v connector,…

Not available.

Features:Easily inflate a lightweight airbed without introducing humidity.Dual function - Drybag and pump sack.Built-in valve to remove air after the drybag is closed.XL nozzle for high air flow.Lightweight.Fits Robens Peak valve.Size:22 x 30 x 55 cm (LxWxH).

This single foot pump is gauge-calibrated to 0-7 bar and 0-100 psi and fitted with an easy to read dial gauge. The all steel construction provides added strength, and the barrel is pressure-sealed. It has a sturdy anti-slip pedal and rubber feet, and is supplied with adaptors for airbeds, cycle valves and football. Features and Benefits Constructed from high strength steel for overall product longevity Has been barrel pressure sealed to prevent any leakage Boasts and anti-corrosive finish Anti-slip rubber pedal to ensure optimum grip when pumping up your desired object Typical Applications Ideal for use when inflating footballs, airbeds and bicycles Notes Also available as a single foot pump …

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector. 90° Angled connector for the difficult to reach valves.1/4BSP(F) 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector.• 90° Angled connector for the difficult to reach valves.• Model No.

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose. 90° Angled connector for the difficult to reach valves.6mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL6ATModel

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector. 1/4BSP(F) Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector.• Model No. PCL6SModel No: PCL6S:Brand: Sealey:Description: Straight Swivel - 1/4BSP(F):Nett Weight: 0.035kg:PTDSEAPCL6S

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.6mm Bore Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• Model No. PCL6STModel No: PCL6ST:Brand: Sealey:Description: Straight Swivel - 6mm(1/4) Bore:Nett Weight: 0.035kg:PTDSEAPCL6ST

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose. 90° Angled connector for the difficult to reach valves.8mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL8AModel

This 230V air pump inflates the biggest towable in a flash. This nifty little thing comes with 3 different nozzles.

Pressure is reduced to operating pressure Condensation water is filtered out Filter pressure regulators extend the advantages of the pressure regulator through semi-automatic drainage Pressure gauge for operating pressure settings International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.