Car Pumps & Compressors

A handheld digital air compressor capable of inflating tyres for cars, motorcycles, vans, bikes in a matter of minutes, powered by 12V car adaptor. The digital pressure gauge display is ideal for maintaining and monitoring the tyre pressure ensuring driver safety as well as fuel efficiency. Includes storage for 3 piece adaptor set so that the CTC150 can also be used with general household inflatables. This product is supplied with Flexible Air Hose, Ball Pin, Narrow & Wide Adaptors and 12V Car Adaptor

Portable Air Compressor convenient for carry on, can be use at anytime anywhere. It is not only a car air pump but also car essential safety hammer and emergency flash light. Features: Powerful & Rapid Inflating --- The high powerful tire inflator only take seconds to inflate a basketball and can fills the standard car tires in about 3-5 minutes. Emergency Light --- This Tire Inflator Pump equipped with LED light and flash warning light that helps to inflating your tire or making quick repairs in night. Or use it in emergency. Safety Hammer --- Multifunction car essential, can be used as a safety hammer, escort your driving. Pressure Gauge 3M Power Cable--- The car pump with a large clear pressure …

Features: This air compressor enables to inflates a standard mid-sized car tire from 0~36PSI (0-248KPA) in only 4-6 minutes. It makes inflating low and flat tires in emergency easier and more convenient. Pressure Gauge Display of the air compressor unit: PSI, BAR, KPA, KGF/CM2. Up to 3 meters of 12V car power cord, can effectively ensure the operation of the product radius, press the button to charge immediately without tightening. Built-in a cable storage slot and hose storage slot, no need to need worry the cord is too long to put, more convenient to use. With the built-in LED light, you won't have trouble seeing what you're doing with your tire, even when you're working in a shadowy

QS-1/4-10 10mm OD-1/4" BSPT Hexbody Male Stud Coupling Festo by Festo

Surfing Pumps Star. Triple Action 29psi Air Pump

Die-cast body and dial gauge with rubber protector. Fitted with single clip-on connector. Supplied with quick coupling.Tyre Inflator with Gauge• Die-cast body and dial gauge with rubber protector.• Fitted with single clip-on connector.• Supplied with quick coupling.• Range: 0-12bar(0-175psi).• Model No. SA302Model No: SA302:Air Inlet Size: 1/4BSP:Brand: Sealey:Nett Weight: 0.36kg:Range: 0-12bar(0-175psi):PTDSEASA302

Description: Name: Car Tire Pump Material: ABS Piston Diameter: 17mm Inflation Rate: 22-24L/min Rated Power: Motor Working Power: 90W Pressure Range: 0.2-10.3bar/2-150psi Unit Display: Bar, Psi, Kpa Wireless Lithium Battery Charging: USB-Type-C Charging Cable: 5V2A 80cm long Power Supply: 18650 Lithium Battery 3x1500mAh Charging Time: 3-5 hours Length of Air Hose: 200mm ± 10mm Operating Temperature: -10°C to 45°C Packing list: 1 set x wireless tire inflator

Mini, lightweight and portable. This inflator can be used as emergent tool to meet the situation that you get a flat tyre in the open air. Features: Compact size and inflate hose is housed in the tire pump for easy carrying and storage. With a survival hammer for safety. One button to work, autostop when the tire is full. Tire pressure can be preset to prevents air shortage or overcharge. Strong power, quick inflation. LED display for easy reading. High accurate measurement of tire pressure. Wireless rechargeable desgin. Noise lower than 60dB. Can also power for smartphone. With LED light for dark environment operation. Fine quality inflate hose for long using time. Specifications: Color: …

Item Name:Car Air Pump Material:ABS,Electronic Component Features:Quick Inflation, Low Noise, Multi-protection Type C Battery Capacity:6000mAh(Included) Air Flow:About 20L/Min Amperage:6A Output Power:120W Rated Voltage:DC12V Size Available: Measurement in CM Product Size:17cm x 13.5cm x 7cm/6.69 x 5.31 x 2.76 (Approx.) Power Cord Length:300cm/118.11 (Approx.) Inflatable Tube Length:50cm/19.69 (Approx.) Description: Brand New & High quality. A high-quality intelligent chip is used in this inflatable pump, which features overload protection, short circuit and power failure protection as well as stable output and long life.This inflatable pump is equipped with an inflatable tube reinforced by …

The Airforce tyre inflators have many great features -New Viewing Window - Large window gives a greater field of viewing -Light Weight - Gauge body weighs 923g, less work strain and easier for repetitive use Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped New Valve Mechanism - Simplified 2 stage mechanism design prevents user having to "push" against full line pressure on deflate preventing fatigue New Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2014…

A patented double-flow SAFE pump with air gauge for the inflation of the inflatable sup boards , with the possibility of inflating up to pressure 26psi. The pump has a slightly elongated shape , is very robust and has the aluminum shaft , these characteristics make it suitable to inflate a table in 4/5 minutes of time allowing a minimum of effort. CAPACITY_ 1.8+1.8L, max. pressure 26psi as DIN EN 16051 CHARACTERISTICS_ seals and anti-sand filter for long life of pump and sup board, high-airflow piston for an easier inflation, switch tap for double/single action.Specifications:- Dimention: 8 x 22 cm- Capacity: 500 ml- Material: Stainless steel

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose. 90° Angled connector for the difficult to reach valves.6mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL6ATModel