Drill Bits

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 3/8 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 57.15 • Overall Length Metric: 88.9 • Overall Length Imperial: 3 1/2

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 3/8 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 57.15 • Overall Length Metric: 88.9 • Overall Length Imperial: 3 1/2

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Overall Length Imperial: 5

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Overall Length Imperial: 6

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 1/2 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Overall Length Imperial: 5 1/4

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x27 • Dia Metric: 5 • Cut Length Metric: 27 • Overall Length Metric: 57.5 • Type or Grade: LH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 10 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: LH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 5 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: LH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 6 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: RH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x27 • Dia Metric: 5 • Cut Length Metric: 27 • Overall Length Metric: 57.5 • Type or Grade: RH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 10 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: RH

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. Specifications: • Dia Metric: 7.14 • Dia Imperial: 9/32 • Overall Length Metric: 111

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. Specifications: • Dia Metric: 7.9 • Dia Imperial: 5/16 • Overall Length Metric: 117

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. Specifications: • Dia Metric: 6.3 • Dia Imperial: 1/4 • Overall Length Metric: 88

Blades can be rotated by exchanging blades over. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 20 • Overall Length Metric: 60

Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length Metric: 70 • Bearing Dia Metric: 19 • Angle: 90

Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length Metric: 78 • Bearing Dia Metric: 19 • Angle: 90

Blades that can be rotated in 90 degree increments giving three extra new edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 12 • Overall Length Metric: 52 • Bearing Dia Metric: 19 • Angle: 90

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 40 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 38 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 25 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 20 • Overall Length Metric: 92 • Type or Grade: TCT

Trend SNAP/SB5/SET Bit Set Colour Ring Torsion Zone 15 Piece The SNAP/SB5/SET is an assorted screwdriver bit set for a wide range of applications. With colour rings on the bit shanks to denote type for ease of identification. The set contains fourteen 25mm insert bits which feature a torsion zone to minimise the possibility of breakage. Made of high grade hardened tool steel. Includes a magnetic bit holder. Supplied in flip lid storage case with belt clip. Contains: 1 x Magnetic bit holder 14pcs 25mm insert bits: 2 x Phillips (No.1 & 2) - Red ring 2 x Pozi (No.1 & 2) - Blue ring 2 x Slotted (4mm x 0.6mm & 6mm x 0.9mm) - Red/Orange ring 3 x Hex (3mm, 4mm & 5mm A/F) - Yellow/Orange ring 5 …