Drill Bits

DeWalt DT90292-QZ Spade Bit Tri Flute Extreme 14 x 152mm Impact Rated Self Feed 6 X Faster versus Traditional Spade Bit

DeWalt DT90240-QZ Spade Bit Tri Flute Extreme 16 x 152mm Three cutting edges allow for up to 6x faster cutting* combined with tri-flute design for optimum chip removal. Three cutting spurs for cleaner, faster holes and extended drilling life. Tri-flute tapered design for faster removal of wood chips and less binding.

The DT4962 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 7.5mm • Length: 109mm • Working length: 66mm • Pack Quantity: 1

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.Diameter: 20mm.Working length: 50mm (2in).Overall length: 100mm (4in).Additional Information:• Diameter: 20mm• Overall Length: …

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 5mm • Length: 210mm • Working Length: 150mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

Maximum service life
Excellent machining performance
Ideal quality

The IRWIN Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 8mm • Length: 160mm • Working Length: 100mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The DT4912 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 8mm • Length: 117mm • Working length: 75mm • Pack Quantity:1

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 6mm • Length: 160mm • Working Length: 100mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø19 x 200mmWeight: 0.217KgWarranty: Consumable

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-36 Flat Bit 36mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Bosch 2608833780 SDS+ 5X Hammer Drill Bit 6mm x 200mm x 260mm The Bosch 2608833780 SDS Plus bits offer highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming. Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
- “Turn-angle” head and 4-flute design provide fast dust removal for increased drilling speeds and reduced wear
- Centring tip guides dril…

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 3 x 38 mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Blue Spot Brick Bolsters are manufactured from induction hardened, drop forged steel with a heavy-duty grip.Size: 57mm (2.1/4in).Additional Information:• Width: 57mm

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

• Suitable for drilling out spot welds, can be used on galvanized and high stress steels.• Solid Cobalt allows for resharpening which extends the product life.• Packed in high-density case for safe storage.Manufactured from HSS Cobalt. Can be resharpened for extended life. Supplied in high-density storage case.• Manufactured from HSS Cobalt. • Can be resharpened for extended life. • Supplied in high-density storage case. • Model No. AK4728Technical Specification:Length: 66mmNett Weight: 0.02kgSize: ø6mmDimensions: Length: 19mm x Height: 77mmWeight: 0.016KgWarranty: 1 year

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

These DeWalt Extreme Metal Drill Bits are suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm². Strong central core with tapered web that greatly reduces breakage and no walk tip for easy positioning on curved surfaces. Features & Benefits • Suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm² • An innovative tapered web greatly reduces breakage with a gold ferrous oxide coating preventing overheating for longer bit life • Three flat sides eliminate slipping in the chuck • Permanent size markings located above shank for increased visibility Specifications • Head Type: HSS • Diameter: 10.5mm • Working …