Drill Bits

prices on 13066 models

£100

clear

Show

with photos

Faithfull HSS Jobber 7mm 109mm Pack of 1 FAIPP700

from £1.49

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 7.0 mm Dia.Additional Information:• Tip Diameter: 7.0mm• Working Length: 69mm• Overall Length: 109mm• Pack Qty.: 1

Sealey Worksafe Straight Shank Rotary Impact Ø5.5 x 150mm

from £1.38 up to £1.60

Compare prices₇→

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø5.5 x 150mmDimensions: Length: 1mm x Height: 230mmWeight: 0.026KgWarranty: Consumable

Draper 2.05mm HSS Twist Drill for 2.5 x 0.45 Taps

from £1.38 up to £1.87

Compare prices₆→

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills more→per card (sizes 1.6-3.3mm).

Faithfull HSS Jobber Imperial 23/64" FAIJ2364

from £1.49

Compare prices₃→

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in more→hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.23/64in.Additional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.

Stanley Masonry 4mm 75mm Pack of 1 STA53080

from £1.49

Compare prices₄→

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel constr more→uction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

Faithfull HSS Jobber 1.5mm 40mm Pack of 3 FAIPP150

from £1.49

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 1.5mm. Pack of 3Additional Information:• Tip Diameter: 1.5mm• Working Length: 18mm• Overall Length: 40mm• Pack Qty.: 3

IRWIN Masonry 3.5mm 75mm

from £1.49

Compare prices₃→

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill more→bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless …

IRWIN HSS Cobalt 1mm Pack of 2

from £1.49 up to £1.79

Compare prices₄→

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An in more→dustrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 1mm.Working Length: 12mm.Overall Length: 34mm. Pack of 2.Additional Information:• Tip Diameter: 1.0mm• Working Length: 12mm• …

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 4mm 75mm FA

from £1.49

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 4 mm x 75 mm.Additional Information:• Diameter: 4.0mm• Overall Length: 75mm• Pack Qty.: 1

Sirius Professional HSS Jobber 2.05mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull HSS Jobber Imperial 9/32 FAIJ932

from £1.49

Compare prices₃→

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in more→hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.9/32in.Additional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.

Sirius Professional HSS Jobber 1.3mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bosch HSS PointTeQ 1.5mm Pack of 2 2608577154

from £1.49

Compare prices₅→

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its more→increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Faithfull HSS Jobber 3mm 61mm Pack of 2 FAIPP300

from £1.49

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 3.00 mm Dia. Pack of 2Additional Information:• Tip Diameter: 3.0mm• Working Length: 33mm• Overall Length: 61mm• Pack Qty.: 2

Sealey Worksafe Straight Shank Rotary Impact Ø9 x 120mm

from £1.42 up to £1.65

Compare prices₇→

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø9 x 120mmDimensions: Length: 5mm x Height: 185mmWeight: 0.046KgWarranty: Consumable

Sealey Worksafe Ø5.5 x 110mm SDS Plus

from £1.49 up to £2.85

Compare prices₆→

• Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills more→are fully hardened and ground.• Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground. • Model No. SDS5.5X110Technical Specification:Size: ø5.5 x 110mmWeight: 0.039KgWarranty: Consumable

Sirius Professional HSS Jobber 1.7mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bosch 2608577163 HSS PointTeQ Twist 4.5mm

from £0.96 up to £2.24

Compare prices₈→

Bosch 2608577163 HSS PointTeQ Twist Drill Bit 4.5mm The Bosch 2608577163 drill bit is suitable for fast drilling in metal thanks to its PointTeQ tip design. The self-centring tip prevents wandering, m more→aking quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- Self-centring tip
- Made from high-speed steel for long life
- PointTeQ tip design allows for fast drilling in metal Specification:
- Pack Qty: 1
- Size: 4.5mm

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 4.5mm 85mm

from £1.49

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 4.5 mm x 85 mm.Additional Information:• Diameter: 4.5mm• Overall Length: 85mm• Pack Qty.: 1

Sealey Worksafe Straight Shank Rotary Impact Ø11 x 150mm

from £1.49 up to £1.99

Compare prices₇→

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø11 x 150mmDimensions: Length: 1mm x Height: 230mmWeight: 0.07KgWarranty: Consumable

Milwaukee HSS-G Thunderweb 5mm Pack of 1 4932352356

from £1.49 up to £2.69

Compare prices₅→

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout thei more→r length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 5mm • Length: 86mm • Pack Quantity: 1Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction and …

Sirius Professional HSS Jobber 3.3mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Professional HSS Jobber 4.5mm FAIJ450PRO

from £1.49

Compare prices₃→

The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet t more→he standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 4.5mmWorking Length: 54mmOverall Length: 80mmAdditional Information:• Tip Diameter: …

Draper Expert HSS Imperial 5/32" Pack of 1

from £1.35 up to £1.49

Compare prices₅→

Expert Quality, high speed steel twist drills. Manufactured to DIN 338 and ISO 235/1 Specifications Features & Benefits: • Expert Quality • High speed straight steel drills Contents: 1 x more→HSS Drill Bit, 5/32"

24 more item(s)