Multi Tool Blades

V-Groove Bit. For sign word and lettering. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 37mm Usage: V-groove. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Saw blade for straight and large diameter curved cuts in wooden and plastic materials. This blade has 6 teeth per centimeter ensuring a good balance between speed and precision. Technical specifications: Length: 100mm Cutting depth: 18mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.

DREMEL
2 Years

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 4.8mm. Working length: 1.4mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

This replacement accessory set includes a 2.3mm collet, grinding stones with shanks, a sanding shank, mandrels (for felt wheels and cut off wheels), stainless steel brushes, diamond cutters, HSS drill bits, sanding discs, sanding bands, felt wheels, cut-off wheels, a whetstone and a wrench. For use with rotary tools.

Mandrels are used to mount different accessories, like felt polishing wheels or cut-off wheels.Specifications:Shank diameter - 3.2 mm Maximum RPM: 35.000 1/minPack of 4

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. Technical Specifications: Shank diameter 3.2mm. Working diameter: 3.2mm Accessory length: 39mm. Maximum Speed: 30,000rpm. Recommended attachment: Detailer's Grip Attachment Ref. 577

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

The Starlock ATZ 52 SC scraper provides reliable removal of hard residues. Its sharp blade is ideal for solid, brittle material removal. It features a rigid, firm body design made of HCS (high carbon steel), making the scraper robust and resilient to bending when efficiently removing solidified residues. It reliably removes mortar or tile adhesive, mortar and concrete residues and hard carpet adhesive residues. The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer due to a 3-dimensional tight-fitting connection between machine and accessory. It is suitable for use …

Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals.Specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Pack of 3

Great for detail cleaning and light sanding, as well as paint removal on delicate materials. Suitable for use on wood, plastic, glass, and metals such as steel and aluminum. Includes 180 grit and 280 grit sanding buffs, with a working diameter of 30mm. Suitable for rotary multi tools. The Dremel exclusive Easy Speedclic (SC) mechanism, makes wheel changing keyless, easy and 6 times faster than using a standard mandrel. Compatible with the Dremel SC402 EZ Lock mandrel and standard 402 mandrel. Features & Benefits • For cleaning and light sanding of materials including glass, wood, metal and plastic • Includes 180 and 280 grit sanding buffs • Easy Speedclic (SC): quick and easy …

Use for shaping. smoothing and material removal. Use on hardened steel. stainless steel. cast iron. nonferrous metals. fired ceramics. plastics. hardwoods and other hard materials. Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 38.0 mm Max 30.000 rpm

he Dremel wood drill bit set contains 4 drill bits with centering point for drilling into wood. The different drilling diameters included are 3, 4, 5 and 6 mm. The titanium coating offers high performance and longer lifetime. Shank diameter: 3.2mm. Maximum Speed: 35,000rpm.

Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts. Technical specifications: Length: 100mm Cutting depth: 3mm. Teeth per centimeter: 10 Blade width: 0.2mm. Blade depth:1.9mm.

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue. Size: 20cm x 20cm.

Precision saw blade for fine, clean and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. Use only with Dremel Mini Saw attachment 670. Made of carbon steel, 48 offset teeth guarantee precise, fast cuts up to 6.35 mm. Blade size: 31.8 x 0.6 x 9.2mm Working diameter:31.8mm. Maximum working depth: 6.4mm. Maximum speed: 35,000rpm Essential attachment: Mini Saw Attachment Ref. 670.