Car Subwoofers Mystery MMD-999BS  all car subwoofers →

Made for marine use: Life on the water can be hard on audio gear, with sun, spray, salt, and extreme temperatures, not to mention post-cruise washdowns and the occasional loose fish on the deck. This rugged JBL sub is ready for it all, with a one-piece polymer basket, marine-ready componentry, stainless steel mounting hardware, and a sealed, UV-resistant grille that will stand up to spray and sunlight for years to come. IPx5 Rated: Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating Power handling: 200 watts RMS (600 watts peak power) / Sensitivity: 88 dB at 2.83 volts / Frequency response: 30-250 Hz / Impedance: 4 ohms Available …

Car Subwoofer Speaker / Diameter 381 mm / 15 Inch / 1.800 watt / 88 dB

Car Subwoofer Speaker / Diameter 300 mm / 12 Inch / 300 watt / Nominal Load 150 Watt / Impedance 1 x 4 Ohm

Specifications: This is a complete audio wire kit for car amplifier and subwoofer installation. Comes with all cables and accessories for easy installation of amplifier and subwoofer. Up to 1500W. High power and good performance. Increases the power of your cars audio system. Low noise and distortion. With a fuse holder to protect the audio system from damage by the overload current. Type: Audio Wire Kit Fuse Maximum Current: 60A Power Cable Spec: 175x0.15 8GA Wire Power Cable Color: Clear Red Control Cable Length Color: Clear Blue Power Cable Length: 4.5m - 4.8m/177.17" - 188.98" (Approx.) RCA Interconnect Cable: 4.5m/177.17" (Approx.) Control Cable Length: 4.5m - 4.8m/177.17" - 188.98" …

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

12-inch subwoofer with 4-ohm voice coil 750 watts max power. 250 watts RMS power Polypropylene and mica cone with poly-foam surround Progressive Wavelet Ribs cone keeps distortion low Progressive polyester spider increases the accuracy of the subwoofer cone motion

Boxed Subwoofer / Diameter 200 mm / 8 Inch / 250 watt / Impedance 1 x 4 Ohm

Feature 1Durable Material: The grill protector is made of durable and reliable metal and iron material, high strength and wear resistant, scratch and tear resistant, having a long service time. 2Protective Function: The mesh grill cover can protect your subwoofer from damage such as cuts, tears, scratch, etc., prolonging the service life of the speaker. 3Easy to Install: The grill guard has a simple installation, convenient and time saving, don't need too much tools or complicated steps. 4Decorative Cover: The mesh cover has a advanced appearance of favose mesh, having the powder coated satin trim surface, can make your car fashionable and stylish. 5Various Use: The guard protector has a diameter …

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Peak Power Handling: 350 Watts RMS Power Handling: 175 watts Frequency Response: 30 - 500Hz Sensitivity: 87.46dB

Boxed Subwoofer / Diameter 270 mm / 11 Inch / 300 watt / Impedance 4 x 4 Ohm

IPX8 waterproof design, enjoy music underwater; simple operation, stable wearing, suitable for swimming, surfing, jogging, cycling, skiing, 3m diving and other sports$MP3 internal memory can store songs; continuous playback time 4-6 hours (full charge) $The MP3 host can be detached and used as a U disk$FM radio function, you can freely listen to your favorite radio programs$Stylish design, high quality and clear sound

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base

Aluminum rear link plate 10-inch Front ABS / Steel reinforced port link Center link stabilizing dowels Alpine logo plate All hardware included

20cm (8) Active Underseat Subwoofer. Power: 150/300 Watts RMS/MAX Class-D. low pass 50-120 Hz. bass boost 0-12db @ 45 Hz. high/low level input. auto-on (audio/DC offset). phase shift 0-180°. includes PLC bass remote control. dimensions: 36.5 x 23.8 x 8.5 cm

Description: brand new and high quality Features: Made of high-quality material, durable, firm and stable for us to use. The radiator, also known as the passive speaker, is used to replace the inverter. It has low frequency diving depth, faster speed sense, and low wind noise. So it's a good choice for friends who like to dive deep, but have higher requirements for speed to make subwoofer with radiation basin. Three sizes optional. Easy and convenient to use. Attention: it is not a speaker, no magnet, it can make sound independently. Passive Radiator only, other accessories demo in the picture is not included Specifications: Item Type: Passive Radiator Material: Plastic=Metal Size: (Optional) …

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo

Woofer / Mounting Depth 85 mm / 200 watt / Nominal Load 100 Watt / 83 dB / Impedance 8 Ohm

300 Watts RMS 1300 Watts Max PP Cone Rubber Surround Steel Basket

Space-saving subwoofer solution Recommended power: 800 – 2500 watts. Voice coil 63 mm copper Long-stroke sandwich beading. Solid cast aluminium basket