Drill Bits

SDS-plus-5X drill bits are specially designed with a centring tip for active and accurate centring in concrete. They have a 4-cutter geometry that prevents jamming in rebar and the drill bit tip does not break off. They have a 4-flute design for fast dust removal giving higher drilling speeds and longer life. Centring tip for active and accurate centring in concrete. The asymmetrical drilling head design is unique, ensuring outstanding dust removal and reduced wear. 4-cutter geometry prevents jamming in rebar. The drill bit tip does not break off. 4-flute design gives fast dust removal for higher drilling speed and less wear. Suitable for masonry, concrete and reinforced concrete. Appropriate …

CYL-3 Drill Bit provides lasting performance when drilling in concrete. Compatible with Straight shank systems for all corded or cordless impact drills. High wear resistance from a durable carbide blend developed and manufactured by Bosch. Effective 2-flute U-shape design provides good dust removal, reducing friction and extending lifetime. Lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stones. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings.

Bosch 2608585922 HSS-G Drill Bit for Metal 5mm x 86mm The Bosch 2608585922 single drill has a 5mm diameter, a working depth of 52mm and an overall length of 86mm. The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for …

The DEWALT HSS G-Jobber Drill Bit is a precision ground twist drill bit for rapid drilling, long-life and excellent concentricity. It has been manufactured from High-Speed Steel that conforms to DIN 338. The drill bit is ground from solid stock and has a right-hand cutting, type N flute with a precision ground end at 118 point angle. This DEWALT HSS-G Jobber Drill Bit has the following specification Diameter 4.5mm Overall Length 80mm Working Length 47mm Pack Quantity 1

SDS-plus-5X drill bits are specially designed with a centring tip for active and accurate centring in concrete. They have a 4-cutter geometry that prevents jamming in rebar and the drill bit tip does not break off. They have a 4-flute design for fast dust removal giving higher drilling speeds and longer life. Centring tip for active and accurate centring in concrete. The asymmetrical drilling head design is unique, ensuring outstanding dust removal and reduced wear. 4-cutter geometry prevents jamming in rebar. The drill bit tip does not break off. 4-flute design gives fast dust removal for higher drilling speed and less wear. Suitable for masonry, concrete and reinforced concrete. Appropriate …

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. The Draper Expert range is our benchmark for quality. Manufactured for the professional or for industrial use Specifications High Speed Steel Manufactured to ISO 235/1 Specifications

Bosch 2608587582 SelfCut Flat Drill Bit with Hex Shank 28 x 152mm
The Bosch 2608587582 is a Flat Wood Drill Bit with a 28mm head size. Designed for drilling soft and hardwood as well as light building materials such as plasterboard. They are manufactured from specially hardened steel with precision ground tips and cutting edges for dimensionally accurate holes and are capable of drilling up to 5x faster than standard spade drill bits.Features:
- Flat Wood drill bits suitable for Hard Wood, Soft Wood, Plasterboard/Drywall
- The precision ground tip and cutting edges gives accurate dimensional stability during heavy drilling
- Drill up to 5 times faster than standard spade drills
- Innovative …

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills per card (sizes 1.6-3.3mm).

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 10mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 peaks that offer several distinct competitive advantages - Super-accurate self-centring - you can make a hole in a round-pipe with one hand. - Speed - twice as fast as split point drill bits. - Tool lifetime - up to 10 times longer life in mild steel. Manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance. The cutting performance is fantastic, both on precision and degree of finish, leaving much less defects (burr) than other drill bits. Its protruding centre …

• HSS Roll forged drill bit manufactured to DIN 338.• 118° Point tip.• Efficient clog-free swarf clearance.• For use with hand and pillar drills.• High-density case for safe storage.HSS roll forged drill bit manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. High-density case for safe storage.• HSS Roll forged drill bit manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • For use with hand and pillar drills. • High-density case for safe storage. • Model No. DBI18RFTechnical Specification:Nett Weight: 0.04kgPack Qty: 10Size: ø1/8"Dimensions: Length: 15mm x Height: 93mmWei…

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø10 x 400mmDimensions: Length: 10mm x Height: 480mmWeight: 0.14KgWarranty: Consumable

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Irwin Turbomax HSS Drill Bit (2). Size 4.5 x 80mm. Note: Image is for illustrative purposes only and may differ from the actual product

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø6 x 260mmDimensions: Length: 10mm x Height: 320mmWeight: 0.058KgWarranty: Consumable

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 4.2mm • Total Length: …