Drill Bits

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502810 Blue Groove 4x flat bit has the following specific dimension:Diameter: 17mmAdditional Information:• Diameter: 17mm• Overall Length: 152mm• Pack Qty.: 1

This Milwaukee Concrete Drill Bit has the following specification: Diameter: 5.5mmWorking Length: 90mmOverall Length: 150mm

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.The Faithfull FAISDS6210 SDS Drill has the following dimensions:Diameter: …

Up to 5x more precise than a standard drill bitThe modern construction site requires working on many different materials, and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming – unless you have the Expert MultiConstruction Drill Bit.This highly versatile drill bit can drill accurately into hard materials such as tile and granite without skidding, thanks to its sharp tip and advanced geometric design. Made from optimised carbide using our fine grinding manufacturing technique, it can also tackle concrete, brick, wood and metal. It can always do a professional job – whatever the material.The Bosch Expert MultiConstruction HEX-9 Dril…

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

The Makita P-90205 bit set is a basic tool kit that provides some of the most common sizes of HSS drill bit and screwdriver bits for drilling holes and driving screws into wood and metal. Also included is a magnetic screwdriver bit holder. Features & Benefits • Basic Drilling and Driving acessory set • HSS-TiN drill bits for drilling into wood, metal, plastic etc • Three of the most common screwdriver bit sizes for general fasteners • Includes PH2 and PZ2 bits along with a slotted bit • Magnetic bit holder for quick and simple bit changes Contents • 5mm HSS Drill Bit • 6mm HSS Drill Bit • 7mm HSS Drill Bit • PH2 Phillips Screwdriver Bit • PZ2 …

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 110mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 110mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 110mm Working length. • Supplied in a plastic wallet. • Model No. BSB13.5Technical Specification:Size: ø13.5 x 160mmDimensions: Length: 20mm x Height: 250mmWeight: 0.11KgWarranty: Consumable…

The Faithfull Conical Rasp is ideal for enlarging holes and creating shapes in non-ferrous sheet metals. For use in electric drills. Specifications: Size: 4-12 x 30mm.Shank: 6mm.Additional Information:• Shape: Conical• Max. Diameter: 12mm• Length: 30mm

A must for every Engineers toolbox! StepPower is the perfect tool for precise drilling with a cordless screwdriver or handheld drill without punching or pre-drilling. The innovative step geometry ensures that the material is gradually removed until the desired diameter is achieved. This makes for effortless drilling without exerting force and saves battery power. The stepped twist drill allows the drilling of virtually burr-free holes in all common materials such as hardwood, plastic or metal. The tool also easily drills composite materials. Suited for cordless drills.This makes StepPower an indispensable all-rounder for every workshop. Features & Benefits • 118° Point geometry with …

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

The Bosch 2608831017 SDS plus-3 Drill Bit, suited to drilling in masonry and concrete The Bosch 2608831017 is a single SDS plus-3 drill bit with a diameter of 7.0mm and a working depth of 150mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and feature a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- To be used with rotary hammers with SDS plus holders
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø22 x 155mmDimensions: Length: 10mm x Height: 210mmWeight: 0.182KgWarranty: Consumable

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 6.0mm • Overall Length: 123mm • Working Length: 57mm • Quantity: 1

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.The Faithfull FAISDS12160 SDS Drill has a heavy-duty tungsten …

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 110mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 110mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 110mm Working length. • Supplied in a plastic wallet. • Model No. BSB14.0Technical Specification:Size: ø14 x 160mmDimensions: Length: 5mm x Height: 235mmWeight: 0.102KgWarranty: Consumable

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bits suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø12 x 310mmDimensions: Length: 15mm x Height: 365mmWeight: 0.138KgWarranty: Consumable

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

• High quality drop-forged steel cold chisel with octagonal shaft design.• Black powder coated with polished tip for great resistance against corrosion.• Manufactured in accordance with BS 3066.High quality drop-forged steel cold chisel with octagonal shaft design. Black powder coated with polished tip for great resistance against corrosion. Manufactured in accordance with BS 3066.• High quality drop-forged steel cold chisel with octagonal shaft design. • Black powder coated with polished tip for great resistance against corrosion. • Manufactured in accordance with BS 3066. • Model No. CC32Technical Specification:Length: 250mmNett Weight: 0.4kgDimensions: Length: 30mm x Height: 315mmWeight: 0…

• HSS Roll forged drill bit manufactured to DIN 338.• 118° Point tip.• Efficient clog-free swarf clearance.• Suitable for hand and pillar drills.• High-density storage case.HSS roll forged drill bit manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. High-density case for safe storage.• HSS Roll forged drill bit manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • Suitable for hand and pillar drills. • High-density storage case. • Model No. DB045RFTechnical Specification:Nett Weight: 0.09kgPack Qty: 10Size: ø4.5mmDimensions: Length: 25mm x Height: 105mmWeight: 0.088KgWa…

The HSS Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through holes and pocket holes. This extremely sharp drill bit with a centring tip allows for exact positioning of the hole. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, its two flutes prevent materials from clogging the hole and easily remove debris. This drill bit is suitable for use on soft and hard wood as well as for laminated boards and MDF. Made of HSS (high-speed steel), this Brad Point Drill Bit is ground from solid metal. Its hexagonal shank system allows for fast and tool-free drill bit changes. It has a hexagonal shank system and is …

Increased relief angle from 12° to 17°
Shank Length: 157mm
Diameter: 6mm
Size: 18mm x 152mm

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …