Drill Bits

prices on 9900 models

£40

clear

Show

with photos

Bosch HSS-G 3.5mm Pack of 2 2608585914

from £1.95

Compare prices₅→

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Sirius Professional HSS Jobber 1.35mm

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Sirius Professional HSS Jobber 4.3mm

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Draper Wood , 10mm

from £1.95 up to £2.13

Compare prices₆→

Expert Quality, manufactured from hardened and correctly tempered carbon steel. Suitable for use with hand and power drills. Packed one or two drill bits per hang up card.

Stanley HSS-CNC Metal 5mm 86mm Pack of 1 STA50711

from £1.95

Compare prices₄→

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curve more→d surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

Stanley HSS-CNC Metal 6.5mm 101mm Pack of 1 STA50716

from £1.95

Compare prices₄→

Sealey Worksafe Auger Wood Drill Ø8 x 155mm

from £1.95 up to £2.29

Compare prices₇→

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in more→a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 155mmDimensions: Length: 1mm x Height: 235mmWeight: 0.044KgWarranty: Consumable

Stanley Brad Point Wood 4mm 80mm Pack of 1 STA52006

from £1.95

Compare prices₄→

A brad point drill bit has a centering tip for fast and accurate drilling. They give clean and precise holes when drilling through wood and wood-based materials. Features & Benefits • Centering t more→ip for accurate starting • Chrome- vanadium alloyed steel for strength and durability • Round shank for use with standard corded and cordless drills • Suitable for general purpose use in soft or hard woods, laminates and chipboard Specifications • Diameter: 4mm • Length: 80mm

Sirius Professional HSS Jobber 4.6mm

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Sealey Worksafe SDS Plus Ø6.5 x 210mm

from £1.95 up to £2.03

Compare prices₆→

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills a more→re fully hardened and ground.Technical Specification:Size: ø6.5 x 210mmDimensions: Length: 1mm x Height: 265mmWeight: 0.055KgWarranty: Consumable

Stanley FatMax HSS-CNC 4.5mm 80mm Pack of 1 STA51048

from £1.95

Compare prices₄→

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS more→construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

Faithfull HSS Jobber Metric 9.5mm FAIJ950

from £1.95

Compare prices₃→

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or p more→ower drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.9.50mm.Additional Information:• Tip Diameter: 9.5mm• Working Length: 78mm• Overall Length: 125mm• Pack Qty.: 1

Sirius Professional HSS Jobber 2.35mm

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 7mm 100mm F

from £1.95

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 100 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 100mm• Pack Qty.: 1

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 6mm 100mm F

from £1.95

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 6 mm x 100 mm.Additional Information:• Diameter: 6.0mm• Overall Length: 100mm• Pack Qty.: 1

Sirius Professional HSS Jobber Imperial 7/64" Pack of 1

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Dormer A100 HSS Jobber Number Size N44 Pack of 1 A100N44P1

from £1.95

Compare prices₃→

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld more→power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Faithfull HSS Jobber 7.5mm 109mm Pack of 1 FAIPP750

from £1.95

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 7.5 mm Dia.Additional Information:• Tip Diameter: 7.5mm• Working Length: 69mm• Overall Length: 109mm• Pack Qty.: 1

Faithfull Cobalt Jobber 1mm Pack of 2 FAIPP100COB

from £1.95

Compare prices₃→

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully grou more→nd and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

Draper HSS , 6.5mm

from £1.88 up to £1.95

Compare prices₆→

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

Sirius Professional HSS Jobber Imperial 1/16" Pack of 1

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull HSS Jobber Imperial 3/8" FAIJ38

from £1.95

Compare prices₃→

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in more→hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.3/8in.Additional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.

Sirius Professional HSS Jobber 1.65mm

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Sirius Professional HSS Jobber 4.8mm

from £1.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

24 more item(s)