Drill Bits

High quality bits for recessed TORX® screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with "Take it easy" Toolfinder: colour coding according to profile and size stamp. Features and Benefits: • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure f…

The Wera Impaktor bits are designed for use in all heavy-duty machines, specifically Impact Drivers. Thanks to the best possible utilisation of the material properties and optimally designed geometry added to the rough diamond coating reducing the danger of any damaging cam-out of the screw head, Impaktor will dramatically extend bit service life. Incorporates Wera's tool finder system, based on coloured band coding for screw profiles (black = Pozidriv; red = Phillips etc) with clear size markings. The Bit-Box slide switch allows simple and gradual removal and reinsertion of the bits. The transparent reverse side provides an easy contents check. Contains 15 x Impaktor Bits PH2 x 25mm. Use with …

Universal holder for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features an…

Universal holder for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features an…

Wera Impaktor holder for the absorption of impulse peaks. Particular torsion effect thanks to the double-torsion spring. The retaining ring ensures an optimum fit of the tool in the holder. The magnet provides for additional fixing of the bit and screw. The Impaktor stainless holder with retaining ring and magnet meets the extremely dynamic demands by doing without any small, mechanical parts that are often susceptible. Used mostly for industrial assembly applications such as e.g. with screwdriving robots. Output: suitable for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3. Drive: 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and B…

Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits: • Rapidaptor technology for rapid bit change • Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive • 1/4" hexagon drive Contents: 889/4/1 Rapidaptor Universal Bit Holder, 1/4" x 75 mm

Rapidaptor universal holder for bits with hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The floating, free-turning magnetic sleeve securely holds even large and heavy screws. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and Benefits: • Rapidaptor technology for rapid bit change • Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive • Ring magnet and stop sleeve for secure fit of the s…

Rapidaptor technology for rapid bit change
Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive
Ring magnet and stop sleeve for secure fit of the screw on the holder
1/4" hexagon drive

High quality bits for square socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • Suitable for square head socket screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out &…

1 x Wera 867/4 Z Tough TORX Bit TX20 x 89mm Note: Image is for illustrative purposes only and may differ from the actual product

High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For recessed TORX® screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out • 1/4" hex…

Torsion bits for Pozidriv screws with elastic Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 855/4 B…

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 855/1 TH SB bits, PZ 3 x 25 mm, 2 pieces; 2x 855/1 TH bits: PZ 3x25

Torsion zone for absorption of peak loads
1/4in Hexagon drive x 25 mm Card of 2 x Pozidriv 2 point
855/1 TH Pozidriv Torsion PZ2 Extra Hard Bit 25mm Carded Pack of 2

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 855/1 TH SB bits, PZ 1 x 25 mm, 2 pieces; 2x 855/1 TH bits: PZ 1x25

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits.

BiTorsion bits for Pozidriv* screws with elastic Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Particularly hard for semi-hard materials &…

This BDC screwdriver bit possesses a 1/4in hexagon drive and is suitable for DIN ISO 1173-D 6.3 bit holders. With a BiTorsion construction to ensure long service life, a diamond-coating for secure screw fit and an output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located, the product is designed for heavy duty but delicate work. Features and Benefits Suitable for Pozidriv fasteners which are commonly used in most industries BiTorsion zone is designed to absorb peak loads and ultimately decrease premature wear and tear Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out and ensure work is undertaken …

Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase i…

Diamond coating for secure fit in the
1/4" hexagon drive
Diamond coating for secure fit in the

Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase i…

Wera 851/4 Z Tough Phillips Bit with a 1/4in hexagon drive. Designed to prevent any premature breakage of the drive tip. The ductile and tough bit is great for use with hard materials. Suitable for DIN ISO 1173-F 6.3 bit holders.

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Particularly hard for semi-hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TH bits, PH 2 x 50 mm