Drill Bits

Bosch Sds Plus-3 Drill Bits:The Sds Plus-3 Drill Bit Offers Durability When Drilling In Concrete. To Prevent Heat Development, The 4-Flute Dura Design Provides Effective Dust Removal For Increased Endurance. It Is Made Of High-Alloy Steel, Which Is Produced With An Optimised Hardening Technology To Withstand Wear. For Additional Resistance, Indented Cutting Edges Are Made From An Ideal Bosch-Controlled Carbide Blend. The Bit Is Intended For Work On Concrete And Masonry And Is To Be Used With Rotary Hammers With Sds Plus Holders. As Proof Of Quality, The Drill Bit Bears The Test Mark Of The Pgm Masonry Drill Bit Association Board, Guaranteeing Compliance With Tight Tolerances, Exact Drilling …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

• Designed for dry cutting and suitable for use on most masonry applications, including brick and concrete blocks • Popular for use in the plumbing, electrical and general building trades • Compatible with all 11mm hex connections • Brazed diamond segment connection • Should not be used in hammer modeDesigned for dry cutting and suitable for use on most masonry applications, including brick and concrete blocks, this 22 x 330mm diamond core bit is popular for use in the plumbing, electrical and general building trades. The bit is compatible with all 11mm hex connections and has a brazed diamond segment connection. It should not be used in hammer mode.1 x Diamond Core Drill Bit, 22 x 300mmWar…

• Designed for dry cutting and suitable for use on most masonry applications, including brick and concrete blocks • Popular for use in the plumbing, electrical and general building trades • Compatible with all 1/2" BSP threaded arbors • Laser-welded diamond segment connection • Should not be used in hammer modeDesigned for dry cutting and suitable for use on most masonry applications, including brick and concrete blocks, this 65 x 170mm diamond core bit is popular for use in the plumbing, electrical and general building trades. The bit is compatible with all 1/2" BSP threaded arbors and has a laser-welded diamond segment connection. It should not be used in hammer mode.1 x Diamond Core Drill…

Expert Quality, manufactured from high carbon steel hardened and tempered. Bits are finely ground and polished with honed cutting edges. Display packed.

DeWalt uses toughened steel and a microprocessor controlled heat treatment process to ensure these chisels deliver consistent performance and long life.

Dewalt raises the bar still further with a superior range of SDS MAX drill bits. For use with SDS MAX drive hammer drills (Hilti type F, G, or Y) for anchor, fixing or clearance holes in masonry, concrete, brick or block work. Specifications: • Diameter: 14mm • Length: 540mm • Working Length: 400mmFeatures & Benefits• Drill bit tip delivers effective drilling / breaking longer. • Drill bit tip maintains its effective drilling / breaking edges longer. • 4 cutter tip enables a more circular hole to be drilled • Debris is removed more efficiently from the hole allowing impacts to perform more effectively

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Features & Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry delivers maximum hole concentricity for better fixing retention • Optimised four flute design allows …

The DEWALT Self-Feed Drill Bits are ideal for drilling clean holes in wood, MDF, hardboard and chipboard. They have two sharp cutting edges and an aggressive 'self-feed' spur for rapid penetration into the material. They are fitted with a non-slip shank for better chuck bit retention. For use with corded and cordless drills. These DEWALT Self-Feed Drill Bits have the following specification Diameter 74mm.

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

Irwin extension bar for Auger drill bits to lengthen the reach of a drill. The hex shank prevents the extension slipping in the chuck.The IRW10502789 extension for Auger drillbits has the following specifications: Length: 450mm. Suitable for drill diameters 10-25mm.Additional Information:• Diameter: Extension• Overall Length: 450mm• Working Length: 450mm• Pack Qty.: 1

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 10mm • Length: 87mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.1mm • Length: 81mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.2mm • Length: 81mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.3mm • Length: 81mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.4mm • Length: 81mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.5mm • Length: 81mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.6mm • Length: 87mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.7mm • Length: 87mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.8mm • Length: 87mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 9.9mm • Length: 87mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8