Drill Bits

prices on 13023 models

£100

clear

Show

with photos

Milwaukee Premium Concrete Drill 7mm 150mm Pack of 1 4932471181

from £3.49 up to £11.99

Compare prices₄→

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and h more→olders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 7mm • Length: 150mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Bosch Selfcut Hex Shank Flat 30mm 150mm

from £3.49 up to £4.19

Compare prices₅→

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood w more→ith minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Milwaukee M2 SDS Plus Masonry 5mm 160mm Pack of 1 4932399315

from £3.49

Compare prices₃→

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot dri more→lling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

Sirius Professional HSS Jobber 6.25mm

from £3.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Cold Chisel 300 x 13mm FAI1212 (12 x 1/2in)

from £3.49 up to £5.29

Compare prices₄→

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. more→The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

Dormer A100 HSS Jobber Number Size N75 Pack of 1 A100N75P1

from £3.49

Compare prices₃→

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld more→power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Bosch SDS Plus 5 Masonry 7mm 160mm Pack of 1

from £3.49

Compare prices₅→

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guid more→ance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Stanley FatMax Masonry 5.5mm 85mm Pack of 1 STA58503

from £3.49

Compare prices₄→

Designed with efficiency in mind, the innovative flute design promotes swift material removal and efficient debris evacuation, reducing the risk of bit binding and ensuring a smooth drilling experienc more→e. The robust construction of the bit ensures it can withstand the demands of tough applications, maintaining its sharpness and performance over time. The carbide tip ensures durability and longevity, making it the ideal tool for drilling into concrete, brick, stone, and other masonry materials. Features & Benefits • Flat carbide tip design for less breakage in the hardest of materials • Four flute design removes debris quickly for fast drilling • Hardened steel body for maximum strength …

Sirius Professional HSS Jobber 8mm

from £3.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Sealey Worksafe Hex 100mm Standard Adaptor

from £3.49 up to £5.93

Compare prices₃→

• Standard 100mm Hex chuck adaptor only.Standard 100mm Hex chuck adaptor only.Technical Specification:Nett Weight: 0.12kgWeight: 0.124KgWarranty: Consumable

Stanley Broca HSS-R laminada para Metal ø 35 mm STA50030-QZ

from £3.49 up to £4.49

Compare prices₅→

Item Package Quality: 1
Model Number: STA50030-QZ
Country of origin:- United Kingdom
Package Weight: 20 grams

Faithfull Impact Rated Flat Bit 6 x 152mm FAIFB6

from £3.49 up to £5.39

Compare prices₄→

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision gr more→ound point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

Bosch 5X SDS Plus Masonry 8mm 110mm Pack of 1 2608833788

from £3.49

Compare prices₄→

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head an more→d the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Sealey Worksafe SDS Plus Ø10 x 310mm

from £3.21 up to £4.44

Compare prices₆→

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bits suitable for a variety of applications. Drills more→are fully hardened and ground.Technical Specification:Size: ø10 x 310mmDimensions: Length: 5mm x Height: 370mmWeight: 0.12KgWarranty: Consumable

Bosch 2608596307 Brad Point Drill Bit For Wood 10mm x 120mm

from £2.26 up to £3.49

Compare prices₆→

Bosch 2608596307 Brad Point Drill Bit For Wood 10mm x 120mm The Bosch 2608596307 drill bits are designed for precise drilling in soft and hard wood. They are extremely sharp with a brad point centring more→tip for exact positioning of the hole without tearing the wood. You can expect good material removal without clogging thanks to its two flutes. Features:
- Brad Point Drill Bit offers precise drilling in soft and hard wood
- Extremely sharp drill bit with centring tip allows for exact positioning of the hole
- High-quality shoulder cutters with precise edges that produce tear-free holes
- For exact results, two flutes prevent debris from clogging the hole and easily remove excess materials …

Sealey Worksafe Auger Wood Drill Ø18 x 155mm

from £3.48 up to £4.99

Compare prices₇→

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in more→a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø18 x 155mmDimensions: Length: 20mm x Height: 155mmWeight: 0.135KgWarranty: Consumable

Milwaukee Thunderweb Metal Drill Bit HSS G Grey T4932352362

from £3.49 up to £11.99

Compare prices₄→

Classic geometry with consistent thickness across the entire length
Thicker body and open propeller
For higher torque and higher pressure
Reduces the risk of breakage during deep holes

CK Tools C.K SDS Concrete 5.5x48x110mm

from £2.92 up to £3.49

Compare prices₄→

SDS Drill Bit 5.5x48x110mmC.K SDS Concrete Drill Bit 5.5x48x110mm~ Tungsten carbide tipped with optimized geometry for drilling concrete and stone~ Vacuum brazed tips for durability~ Ground flutes des more→igned for optimum debris removal~ SDS-plus shank~ Diameter: 5,5 mm~ Working length: 48 mm~ Total length: 110 mmTechnical DataDiameter: 5.5mmWorking length: 48mmOverall length: 110mmComponent Material:Tungsten tipTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger …

Stanley HSS-R Metal 5mm 86mm Pack of 1 STA50055

from £3.49

Compare prices₄→

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, ex more→tending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 5mm • Drill Length: 86mm • He…

Milwaukee Hex Shank Flat 19mm 160mm Pack of 1 4932363137

from £3.49

Compare prices₃→

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. more→1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 19mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Dormer A002 HSS Tin Jobber 3.5mm Pack of 1 A002S3.5

from £3.49

Compare prices₃→

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling more→applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

Sirius Professional HSS Jobber 0.52mm

from £3.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Dormer A002 HSS Tin Jobber 6.5mm Pack of 1 A002S6.5

from £3.49

Compare prices₃→

Stanley Hex Shank HSS Metal 3mm 77mm Pack of 1 STA50018

from £3.49

Compare prices₄→

Crafted with robust materials, the STA50018 is a resilient companion for both workshop and job site challenges. Its ergonomic design prioritizes user comfort during prolonged use, offering a secure gr more→ip and precise control. With 118° tip grinding, Stanley high speed drill bits deliver accurate holes, the Hex shank limits the drill bit slippage and enhances power tool compatibility. Features & Benefits • For general purpose drilling into metal • For use in corded/cordless drills and impact drivers • Hex shank prevents bit slipping in standard drill chucks • For drilling into soft steel and nonferrous metals Specifications • Diameter: 3mm • Length: 77mm • …

24 more item(s)