Car Pumps & Compressors

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose. 90° Angled connector for the difficult to reach valves.8mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL8AModel

In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars commercial vehicles motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 bar(300psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91327"

QSL-3/8-8 8mm OD-3/8" BSPT Swivelmale Stud Elbow Festo by Zoro Select

GB1021914-01 Quick Release Plug without Valve by Zoro Select

Hose and AdaptersFeatures:- Double action works on both up and down strokes- Inflates and Deflates- Provides up to 15 PSI pressure- Includes a 50 accordian style hose with 4 nozzles to fit most valves- Use for rubber boats, inflateable mattresses, watertoys and more

E-ACE M05 Car Tire Inflator Digital Air Compressor Pump with LED Light DC 12V Auto Air Pump for Car Motorcycle Main Features： 1.This air compressor enables to inflates a standard mid-sized car tire from 0~36PSI (0-248KPA) in only 4-6 minutes. 2.It makes inflating low and flat tires in emergency easier and more convenient. Pressure Gauge Display of the air compressor unit: PSI, BAR, KPA, KGF/CM2. 3.Up to 3 meters of 12V car power cord, can effectively ensure the operation of the product radius, press the button to charge immediately without tightening. 4.Built-in a cable storage slot and hose storage slot, no need to need worry the cord is too long to put, more convenient to use. 5.With the bu…

Suitable for textiles, boxes, mesh crates, etc. For staplers Bostitch, Esco, KWB, Lux, Novus, Rocafix, Rocagraf, Swingline Width in mm: 13 Length in mm: 8 Thickness in mm 0.75

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector. 1/4BSP(F) Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector.• Model No. PCL6SModel No: PCL6S:Brand: Sealey:Description: Straight Swivel - 1/4BSP(F):Nett Weight: 0.035kg:PTDSEAPCL6S

Use For Inflating Sups Or Wing Or Kite Bladders. Supplied With Varied Adaptors.Features:- Foot Stand For Easy Bracing- Easy Read Pressure Gauge- Various Adaptors Provided- Ergo Shaped Handles- Compact Size

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.

This single foot pump is gauge-calibrated to 0-7 bar and 0-100 psi and fitted with an easy to read dial gauge. The all steel construction provides added strength, and the barrel is pressure-sealed. It has a sturdy anti-slip pedal and rubber feet, and is supplied with adaptors for airbeds, cycle valves and football. Features and Benefits Constructed from high strength steel for overall product longevity Has been barrel pressure sealed to prevent any leakage Boasts and anti-corrosive finish Anti-slip rubber pedal to ensure optimum grip when pumping up your desired object Typical Applications Ideal for use when inflating footballs, airbeds and bicycles Notes Also available as a single foot pump …

Emergency tyre sealant refill with hose for Sealey Model No. MAC10S. Can seal a puncture up to Ø6mm. Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair. Suitable for cars, vans and 4x4s.

Bosch Miscellaneous Part Original Manufacturer

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector. 90° Angled connector for the difficult to reach valves.1/4BSP(F) 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector.• 90° Angled connector for the difficult to reach valves.• Model No.

This is the most convenient pump on the market.It is great to use to inflate small inflatables and airbeds or to use with a 12V pump to top off your larger inflatables so they are nice and firm.The double action hand pump provides a continuous stream of air on the up and down stroke for faster inflation.It is made from lightweight non-corrosive plastic and comes with 4 inflation adapters for just about any valve you will come across.Double Volume/Double Action With Continuous Airflow On The Up And Down Stroke0.3 Bar Pressure And 2 × 2 LiterHose Locking System That Allows The Hose To Lock Into The Body So It Won´t Fall Off During Use4 Universal Valve AdaptersHeavy-Duty Molded Construction with Er…

Open ended twin hold on tyre valve inflator connector. 1/4in. female thread. With an overall length of 250mm. For use on standard bore tyre valves. Features and Benefits Black colour coded handle to allow you to easily identify the correct tool (black for open ended) Suitable for use with MK3 tyre inflator, PCL wall gauges and PCL portable gauges