Car Pumps & Compressors

This 12V analogue tyre inflator is designed primarily for the rapid inflation of car bicycle motorcycle and small commercial vehicle tyres. It’s also supplied with a range of adaptors (three) to make it suitable for the inflation of balls toys and other inflatable products. It features a built-in LED worklight and has a three metre power cord with 12V power plug and includes a spare fuse. Dial readings are in psi/bar and the inflator has built-in compartments for the power cord air hose and accessories.PTDDRPDIR13274

Bosch 0986437100 Good Bosch 0986437100 Radial Piston Pump

Item Name:Car Air Pump Material:Brass,ABS,Electronic Component Battery:4000mAh(Included) Input Voltage:5V Power:60W Maximum Inflation Volume:20L/MIN Maximum Inflation Pressure:150PSI Features:Low Noise, High Precision, Easy Operation Size Available: Measurement in CM Product Size:16cm x 6.3cm x 4.3cm/6.3 x 2.48 x 1.69 (Approx.) Inflatable Tube Length:30cm/11.81 (Approx.) Description: Brand New & High quality. Featuring a built-in high-capacity battery and LED, this product can be used as an inflatable pump, rechargeable battery and flashlight. With a digital display and automatic tire pressure detection, it is multi-purpose.High-end chip and pure copper motor are used in this inflatable pump,…

Suitable for inflation of twin tyres as found on commercial vehicles.

A brand-new Bosch OEM part 986437015

Double action pump complete with adapters.

Suitable for textiles, boxes, mesh crates, etc. For staplers Bostitch, Esco, KWB, Lux, Novus, Rocafix, Rocagraf, Swingline Width in mm: 13 Length in mm: 8 Thickness in mm 0.75

Composite body and dial type gauge with rubber protector. Calibrated in bar and psi. Fitted with 500mm rubber hose and single clip-on connector.Tyre Inflator with Clip-On Connector• Composite body and dial type gauge with rubber protector.• Range: 0-10bar/0-145psi.• Fitted with 500mm rubber hose and single clip-on connector. • Model No. SA9302Model No: SA9302:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 12bar(175psi):Minimum Air Supply: 145psi:Nett Weight: 0.56kg:Range: 0-10bar(0-145psi):PTDSEASA9302

Have a happy shopping! Parameter: Colour: Black Current: 7A Voltage: 12V Material: metal motor pure copper cylinder Power cord length: 3M Inflatable tube length: 35Cm Power: 60W Power supply mode: Cigarette lighter power supply Pressure: 71PSI Main scope of application: all types of vehicles excluding trucks and engineering vehicles over 5 tons, electric vehicles, various types of bicycles, inflatable cushions, kayaks, etc Additional functions: tire pressure detection, night lighting Maximum continuous working time: 40 minutes Cooling time: 20 minutes Air pressure unit: PSI, BAR, KPA, kg cm2 Feature: Wired portable design The wired design and compact size of this tire inflator make it easy …

Smarter Shopping,Better Living! Features: 1. The car tire inflator has a large LED digital display screen with with 4 pressure measurement units- PSI, KPA, BAR, KGCM². This air compressor will pump accurate amount of air and automatically stop inflating when the tire pressure reaches to the preset value, offering you a safe, quick and reliable using experience. 2. With 2*1800mAh super power battery, It can work continuously for close to 30min, about 3-5 hours to be fully charged. No need to connect charging cablecigarette lighter when working. High efficiency power motor, providing airflow 16LMin. 3 kinds of lights, LED, SOS, flashing lights, for the dark night of inflation, travel to

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.

All-metal design with braided delivery hose with "lock on" connector for tyres Special nozzle for footballs Rubber pad on foot pedal Display carton All-metal design with braided delivery hose with "lock on" connector for tyres Rubber pad on foot pedal Special nozzle for footballs

A brand-new Bosch OEM part 986437320

The BlueSpot Tyre Inflator (220PSI) allows the easy inflation of tyres up to 220 PSI. The twin-sided push on connector allows for easy access to inner and outer tyre valves on twin wheel vehicles. The lever trigger allows for precise inflation. The air bleed valve allows for the reduction of excess tyre pressure. 1/4" air inlet.

The air pump uses pure copper coil motor and whole metal cylinder block, support quick inflation and tire pressure detection, digital display with high brightness lamp. Features: Pure copper coil motor, strong energy, lowe consumption, small noise. Tire pressure detection, just plug the inflation nozzle into tire valve and press it to display current tire pressure. Concealed storage of cable, say goodbye to the messy. Automatically stop, press to start, no need to watch it. Whole metal cylinder block, quick heat dissipation, long service life. High brightness lamp, strong lighting effect, long-lasting illumination. Digital display, night vision, easy to operate and view. Specifications: Material: …

Features: This air compressor enables to inflates a standard mid-sized car tire from 0~36PSI (0-248KPA) in only 4-6 minutes. It makes inflating low and flat tires in emergency easier and more convenient. Pressure Gauge Display of the air compressor unit: PSI, BAR, KPA, KGF/CM2. Up to 3 meters of 12V car power cord, can effectively ensure the operation of the product radius, press the button to charge immediately without tightening. Built-in a cable storage slot and hose storage slot, no need to need worry the cord is too long to put, more convenient to use. With the built-in LED light, you won't have trouble seeing what you're doing with your tire, even when you're working in a shadowy

PCL has cost-effective and accurate tyre inflation boxed off with this space-saving, entry-level unit, the ACCURA QUBE Series II Tyre Inflator. The ACCURA QUBE a firm favourite in factories, tyreshops and garages all over the world has now been made even better with integration of PCL's latest digital and communications developments. The tiny but beautifully formed unit now packs an even more powerful punch. To the already fast and safe inflation has been added higher levels of speed and accuracy while PCL has included its new "human-touch" recognition software to the buttons making the unit even easier, faster and more robust. All the customer needs to do is pre-set the required pressure, place …