Drill Bits

Expert Quality, metric-sized high speed steel drills (with 5% COB alt). The addition of COB alt to HSS prevents wear for longer life. Contents: 1 x HSS Cobalt Drill Bit, 8.3mm

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

HSS roll forged drill bit manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. High-density case for safe storage. Features & Benefits: • HSS Roll forged drill bit manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • Suitable for hand and pillar drills. • High-density storage case. • Model No. DB060RF Specifications: Model No DB060RF Brand: Sealey Nett Weight: 0.15kg Pack Qty: 10 Size: Ø6mm

This spade bit has a 1/4-inch hex shank system and it is best for use with portable power drills. The Self-Cut Speed Spade Bit performs extremely fast hole drilling. Its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion. Fast chip removal for rapid results is made possible by the specially shaped spade. In product tests, this drill bit produces holes 10 times faster than a standard spade bit. It is suitable for use on soft and hard wood, light building materials and plasterboard. Total length 152 mm • Extremely Fast Holes • Self-Cut Speed Spade Bit performs extremely fast hole drilling • Self-feeding …

The Rotabroach RA356 pilot pin is compatible with Rotabroach TCT cutters from 18mm - 65mm diameter with 50mm depth of cut and Rotabroach Imperial cutters from 11/16" - 2 3/8" diameter with 2" depth of cut.

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 Specifications Contents: 1 x Masonry Drill Bit, 15 x 150mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 3.3 x 40 mm

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Manufactured to ISO 235/1 Specifications Contents: 1 x HSS Drill Bit, 13.0mm

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 16 • Overall Length Metric: 152

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The Faithfull Bevel Edged Chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 4.1 x 44 mm

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

The Faithfull Bevel Edged Chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

The Blue Spot Tools 4-22mm Step Drill is specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood. Manufactured from high steel for increased durability and cutting power. Titanium coated to reduce friction and heat. 2mm step increments. Additional Information:• Size Range: 4-22mm• No. of Steps: 10

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 130mm Working length. Supplied in a plastic wallet. Features & Benefits: • HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet. • Model No. BSB17.5 Specifications: Model No BSB17.5 Brand: Worksafe Size: Ø17.5 x 190mm