Drill Bits

Dewalt DT4776 Extreme Impact Flatwood Drill Bit 35mm x 152mm The Dewalt DT4776 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 35mm 
- Length: 152mm
- Pack Quantity: 1

Expert Quality, hexagonal steel shank chisel with hardened and tempered cutting edge. Fitted with impact absorbing hand protection soft grips. Display packed.

Bosch 2608587165 CYL-9 Ceramic and Glass Drill Bit 10mm The Bosch 2608587165 drill bits are suitable for drilling through soft-to-medium hard tiles and glass thanks to their simple flute-less design. They are compatible with both corded or cordless non-impact drills with a cylindrical shank system, and allow for dry drilling without lubrication. This makes working effortless and convenient for optimum productivity. In addition to this, they are extremely durable and long lasting. Features:
- Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient
- Simple flute-less design makes these bits suitable for drilling through soft-to-medium hard …

Octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied with one replaceable comb scutch. Display packed.

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

DeWalt Extreme series Impact Flatwood drill bits are made to be especially tough and durable. Suitable for rapid drilling of holes in hardwood and softwood, these drill bits will also withstand accidental contact with nails buried in the timber. Features & Benefits • For fast and accurate results in hardwood, softwood, lumber, and wood with nails • Heavy-duty full length heat treat shank provides maximum durability against bending and breaking • Extra thick and robust steel shank for outstanding durability • 1/4" hex fitting prevents slipping in drill chucks • Hang hole allows for bit storage & wire pulling Specifications • Shank: 1/4" Hex • Diameter: 10mm …

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø14 x 600mmDimensions: Length: 15mm x Height: 670mmWeight: 0.358KgWarranty: Consumable

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 6.5mm • Length: 260mm • Working Length: 200mm • Pack Qty: 1 Features and Benefits: • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter …

The Faithfull Bevel Edged Chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Full length bevel edged blades manufactured from carbon steel hardened, tempered, finely ground and clear lacquer coated for corrosion protection. Impact - resistant polypropylene handles. All blades have blade guards. Display packed.

A must for every Engineers toolbox! StepPower is the perfect tool for precise drilling with a cordless screwdriver or handheld drill without punching or pre-drilling. The innovative step geometry ensures that the material is gradually removed until the desired diameter is achieved. This makes for effortless drilling without exerting force and saves battery power. The stepped twist drill allows the drilling of virtually burr-free holes in all common materials such as hardwood, plastic or metal. The tool also easily drills composite materials. Suited for cordless drills.This makes StepPower an indispensable all-rounder for every workshop. Features & Benefits • 118° Point geometry with …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

IRWIN Blue Groove 6X Drill Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 22 mm.Length : 165 mm.Additional Information:• Diameter (mm): 22• Overall Length (mm): 165• Pack Qty.: 1

• High quality drop-forged steel cold chisel with octagonal shaft design.• Black powder coated with polished tip for great resistance against corrosion.• Manufactured in accordance with BS 3066.High quality drop-forged steel cold chisel with octagonal shaft design. Black powder coated with polished tip for great resistance against corrosion. Manufactured in accordance with BS 3066.• High quality drop-forged steel cold chisel with octagonal shaft design. • Black powder coated with polished tip for great resistance against corrosion. • Manufactured in accordance with BS 3066. • Model No. CC35Technical Specification:Length: 250mmNett Weight: 0.73kgDimensions: Length: 25mm x Height: 325mmWeight: 0…

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø20 x 200mmDimensions: Length: 10mm x Height: 265mmWeight: 0.22KgWarranty: Consumable

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP700LS Pre Pack HSS Jobber Drills (1) Long Series 7.0mm have the following specifications:Diameter: 7.0mm Overall Length: 156mmAdditional Information:• Tip Diameter …

Up to 3x faster than a standard drill bitSpade bits are a great accessory for electricians and other installation and building workers. What if they could be even faster and more efficient? With Bosch Tip Technology, they can.The Expert SelfCut Speed features the most advanced designs for spade bits, making it easy to use and highly practical for heavy professional users. Its Bosch patent threaded tip draws the spade bit into wood with only the lightest pressure from the user, which is especially helpful when drilling upside down or in tight niches. Its advanced paddle design ensures extra speed.Equally at home in softwoods, chipboard or particleboard, the Bosch Expert SelfCut Speed Spade Bit …

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 14mm • Length: 300mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

This Faithfull chisel is a high-quality chisel for the professional user and the keen DIY enthusiast. The chisel's blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards to ensure that the cutting edge remains sharper for longer. The bevelled edge blade design makes the chisel ideal for both fine work and for cutting into tight corners. The red polypropylene handle has an anti-slip, soft-grip coating for user comfort and the steel striking cap provides added protection for when used with a mallet, or an occasional hammer blow. Specifications Supplied in a plastic hanging case with magnetic storage clip Size: 6mm (1/4in) Chrome vanadium …

IRWIN Blue Groove 6X Drill Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 20 mm.Length : 165 mm.Additional Information:• Diameter (mm): 20• Overall Length (mm): 165• Pack Qty.: 1

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 16mm • Length: 200mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …