Car Pumps & Compressors

Pistol - grip fitted with a clip-on connector compatible for most vehicles including; cars commercial vehicles motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 bar (300psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91313"

Small and portable, it does not take up a lot of space in the car. Mini is more portable, saying goodbye to bulkiness and does not take up space. It is only about the size of a mobile phone. Continuous inflation, upgraded battery life, continuous charging of multiple tires, 45 minutes of non-stop inflation, bid farewell to battery life worries. One-touch replenishment, stop when full, simple operation to get started, control with one hand. Comes with 3-meter power supply cable, unlimited possibilities, four tires can be charged. Not limited by venue, can be used in multiple scenarios: cars, motorcycles, bicycles, ball games, inflatable beds, etc. can be used. Description: Introducing the

For inflating tyres, airbeds, boats, sports equipment and any other inflatable products. Complete with 3m of cable 12V car cigarette lighter plug, nozzles and adaptors. The dual air pressure gauge can be read in both lb/in2 and kg/cm2. 300psi.

This is portable, so it can be used wherever you may be. Suitable for Inflation of Car/4x4/Caravan/Motorhome/Trailer/Motorcycle Tyres, aswell as inflating Bicycle/ Scooter/Moped tyres. It operates on 12 Volt DC current and plugs directly into a vehicle 12v power socket using minimum amperage, also an easy to read pressure gauge.

Die-cast body and dial type gauge with rubber protector. Fitted with single clip-on connector.Tyre Inflator with Clip-On Connector• Die-cast body and dial type gauge with rubber protector.• Fitted with single clip-on connector.• Range: 0-10bar(0-145psi).• 1/4BSP Air inlet.• Model No. SA924Model No: SA924:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 12bar(175psi):Minimum Air Supply: 3psi:Nett Weight: 0.36kg:Range: 0-10bar(0-145psi):PTDSEASA924

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.8mm Bore Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.• Model No. PCL8SModel No: PCL8S:Brand: Sealey:Description: Straight Swivel - 8mm(5/16) Bore:Nett Weight: 0.035kg:PTDSEAPCL8S

Brand Name : MOJOYCE Origin : CN(Origin) Item Width : 12cm Model Name : Car Tire Inflator Voltage : 12V Item Height : 12cm Item Type : Pumps Item Weight : 500g Item Length : 13cm 300 PSI 12V Digital Tire Pump Auto Air Compressor Car Tire Inflator Car Pressure Gauge for Car Bicycle Feature: 1. You can insert the product into the cigarette lighter and start working. It is a good helper for daily air replenishment and emergency rescue. With it, you can inflate your car tires anytime, anywhere. Maintain normal tire pressure, save fuel and ensure safe driving. 2. The product is equipped with a barometer. When the tire is inflated, the indicator of the gauge will rise with the saturation of the

Emergency tyre sealant refill with hose for Sealey Model No. MAC10S. Can seal a puncture up to Ø6mm. Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair. Suitable for cars, vans and 4x4s.

Not available.

This single foot pump is gauge-calibrated to 0-7 bar and 0-100 psi and fitted with an easy to read dial gauge. The all steel construction provides added strength, and the barrel is pressure-sealed. It has a sturdy anti-slip pedal and rubber feet, and is supplied with adaptors for airbeds, cycle valves and football. Features and Benefits Constructed from high strength steel for overall product longevity Has been barrel pressure sealed to prevent any leakage Boasts and anti-corrosive finish Anti-slip rubber pedal to ensure optimum grip when pumping up your desired object Typical Applications Ideal for use when inflating footballs, airbeds and bicycles Notes Also available as a single foot pump …

Description: Name: Automobile Tire Inflator Power: 120W Voltage: 12V 7.4V Cylinder diameter: 17mm Battery capacity x number of cells: 1800mA x 2 cells Charging time: 4 hours Color: Black Packaging size: 165 x 80 x 117mm Product weight: 0.538kg Air pump flow rate: 30L/min Inflation noise (at one meter): less than 85 decibels Number of fully charged tires: 3 tires (195/55R15 tires) Maximum set pressure: 150PSI Vehicle line length: 3 meters Packing list: 1 x car wireless air pump 1 x inflatable nozzle 3 x inflatable adapter 1 x USB charging cable 1 x user manual Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector. 90° Angled connector for the difficult to reach valves.1/4BSP(F) 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector.• 90° Angled connector for the difficult to reach valves.• Model No.

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose. 90° Angled connector for the difficult to reach valves.6mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL6ATModel

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector. 1/4BSP(F) Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4BSP(M) connector.• Model No. PCL6SModel No: PCL6S:Brand: Sealey:Description: Straight Swivel - 1/4BSP(F):Nett Weight: 0.035kg:PTDSEAPCL6S

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.6mm Bore Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• Model No. PCL6STModel No: PCL6ST:Brand: Sealey:Description: Straight Swivel - 6mm(1/4) Bore:Nett Weight: 0.035kg:PTDSEAPCL6ST

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose. 90° Angled connector for the difficult to reach valves.8mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL8AModel

Pressure is reduced to operating pressure Condensation water is filtered out Filter pressure regulators extend the advantages of the pressure regulator through semi-automatic drainage Pressure gauge for operating pressure settings International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.