Drill Bits

prices on 16238 models

Show

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Draper HSS , 9/32"

from £1.84 up to £2.51

Compare prices₆→

Expert Quality, high speed steel twist drills. Display packed.

Milwaukee HSS-G Shockwave 2.5mm Pack of 2 48894704

from £2.49

Compare prices₃→

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combi more→nation of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 2.5mm • Total Length: …

Faithfull Professional HSS Jobber 2.5mm 55mm Pack of 2 FAIPP250P

from £2.49

Compare prices₃→

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fu more→lly ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP250PRO Professional Jobber Drill Bits have the following specifications: Diameter: 2.5mm. Pack quantity: 2.Additional Information:• Tip Diameter: 2.5mm• Working Length: 27mm• Overall Length: 55mm• Pack Qty.: 2

Milwaukee Premium Concrete Drill 4mm 90mm Pack of 1 4932471169

from £2.49

Compare prices₃→

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and h more→olders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 4mm • Length: 90mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Milwaukee Contractor SDS Plus Masonry Hammer 14mm 160mm 49324712

from £2.49

Compare prices₃→

Milwaukee Contractor series SDS Plus drill bit. Specifications • Shank: SDS Plus • Diameter: 14mm • Length: 160mm

Bosch HSS-Co Cobalt 2mm Pack of 1

from £2.00 up to £2.49

Compare prices₆→

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel) more→, which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Sealey Worksafe SDS Plus Auger Wood Drill Ø8 x 200mm

from £2.35 up to £3.49

Compare prices₇→

• Superior quality auger wood drill bit has the SDS Plus shank.• Ideal for use with 2kg SDS Plus drills with hammer action switched off.• Fully hardened with a screw point to aid location and smooth d more→rilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has the SDS Plus shank. Ideal for use with 2kg SDS Plus drills with hammer action switched off. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 200mmDimensions: Length: 10mm x Height: 275mmWeight: 0.064KgWarranty: Consumable

Stanley Brad Point Wood 7mm 110mm Pack of 1 STA52021

from £2.49

Compare prices₄→

A brad point drill bit has a centering tip for fast and accurate drilling. They give clean and precise holes when drilling through wood and wood-based materials. Features & Benefits • Centering t more→ip for accurate starting • Chrome- vanadium alloyed steel for strength and durability • Round shank for use with standard corded and cordless drills • Suitable for general purpose use in soft or hard woods, laminates and chipboard Specifications • Diameter: 7mm • Length: 110mm

Stanley FatMax HSS-CNC 6mm 93mm Pack of 1 STA51068

from £2.49

Compare prices₄→

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS more→construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

Bosch UNEO SDS Quick Masonary 4mm 85mm Pack of 1 2609256900

from £2.49

Compare prices₅→

Concrete drill bit with SDS quick shank Specifications: Diameter mm: 4,0 Working length mm: 40 Total length mm: 85 Materials: Concrete Stone Materials in Detail: Concrete Natural stone Masonry Rein more→forced concrete

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 5mm 150mm F

from £2.49

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5 mm x 150 mm.Additional Information:• Diameter: 5.0mm• Overall Length: 150mm• Pack Qty.: 1

Faithfull HSSE M35 Cobalt Quick-Change Impact 4.0mm OL91mm WL43m

from £2.49 up to £3.39

Compare prices₄→

Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 p more→eaks that offer several distinct competitive advantages - Super-accurate self-centring - you can make a hole in a round-pipe with one hand. - Speed - twice as fast as split point drill bits. - Tool lifetime - up to 10 times longer life in mild steel. Manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance. The cutting performance is fantastic, both on precision and degree of finish, leaving much less defects (burr) than other drill bits. Its protruding centre …

Milwaukee HSS-G Thunderweb 6.5mm Pack of 1 4932352359

from £2.49 up to £6.17

Compare prices₄→

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout thei more→r length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 6.5mm • Length: 101mm • Pack Quantity: 1Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

Bosch 2608587573 SelfCut Flat with Hex Shank 16mm x 152mm

from £1.82 up to £7.48

Compare prices₈→

Bosch 2608587573 SelfCut Flat Wood Drill Bit 16mmBlast through wood and light building materials with the Bosch 2608587573 SelfCut Flat Wood Drill Bit. This 16mm flat bit tackles various drilling task more→s with exceptional speed and precision.
Features:
- Ideal for softwood, hardwood, and even light building materials like plasterboard
- The precision-ground tip and cutting edges ensure clean, dimensionally accurate holes, minimising rework and wasted materials
- Additionally, the innovative self-feeding threaded tip lets the bit pull itself through materials, achieving drilling speeds up to 5 times faster than standard spade bits
- The self-feeding design significantly reduces the force required …

Bosch Selfcut Hex Shank Flat 19mm 150mm

from £2.49 up to £2.99

Compare prices₅→

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood w more→ith minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Bosch 2608587568 SelfCut Flat with Hex Shank 8 x 152mm

from £2.00 up to £4.69

Compare prices₇→

Bosch 2608587568 SelfCut Flat Drill Bit with Hex Shank 8mm x 152mmThe Bosch 2608587568 is a Flat Wood Drill Bit with an 8mm head size. Designed for drilling soft and hardwood as well as light building more→materials such as plasterboard. They are manufactured from specially hardened steel with precision ground tips and cutting edges for dimensionally accurate holes and are capable of drilling up to 5x faster than standard spade drill bits.Features:
- Drill up to 5 times faster than standard spade drills
- Flat Wood drill bits suitable for Hard Wood, Soft Wood, Plasterboard/Drywall
- Innovative self-feeding threaded tip for fast and accurate drilling with little exertion of force
- The precision-ground …

Dormer A100 HSS Jobber Number Size N64 Pack of 1 A100N64P1

from £2.49

Compare prices₃→

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld more→power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Bahco 9629 Hex Shank Flat Wood 14mm 75mm 152mm 9629-14

from £2.49 up to £4.29

Compare prices₄→

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The harden more→ed blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-14 Flat Bit 14mmAdditional Information:• Diameter: 14mm• Overall Length: 152mm• Pack Qty.: 1

Sirius Professional HSS Jobber 3.75mm

from £2.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

IRWIN Joran 10501834 8 x 120mm Masonry Drill- you get 10

from £2.49 up to £3.99

Compare prices₄→

Designed for fast and efficient drilling in brickwork, concrete and breeze block. Drills up to 60% faster than competitive drill bits and still with the same high durability. Unique, pressed carbide t more→ips for aggressive cutting. Drill speed up to 60percent faster than competitive drill bits whilst maintaining the same high durability. Single flute design. Pressed diamond-ground carbide tip. Unique carbide tip design. Chrome vanadium body. High durability.

Dormer A100 HSS Jobber Number Size N15 Pack of 1 A100N15P1

from £2.49

Compare prices₃→

Faithfull Cold Chisel 150 x 13mm FAI612 (6 x 1/2in)

from £2.49 up to £3.29

Compare prices₄→

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. more→The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

IRWIN Pro Titanium Nitride Coated 7.5mm 109mm Pack of 1 10502594

from £2.49 up to £4.99

Compare prices₅→

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -2 more→0% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is …

24 more item(s)