Drill Bits

prices on 16196 models

Show

DeWALT DT9521 SDS Plus Extreme 6.5 x 150 x 210mm

Choose The Dewalt DT9521 SDS Plus Extreme Drill Bit for Speed and Endurance The Dewalt DT9521 extreme drill bit has great performance in terms of speed, life, and endurance. Perfect for drilling mater more→ials such as concrete, masonry, stone and brick thanks to its superior carbide grade construction and hardened body. The new tip design ensures better bit penetration for optimum drilling performance and precision. Features:
- Optimised flute design allows efficient debris removal
- Hardened body for extra strength and reduced breakage
- Superior carbide grade for long life and greater durability
- New tip design ensures better bit penetration, longer life, faster drilling and greater durability …

IRWIN Masonry 7mm 160mm

from £2.95 up to £4.59

Compare prices₄→

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill more→bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless …

IRWIN Multi Purpose 5mm 90mm

from £2.95 up to £4.39

Compare prices₅→

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbid more→e tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 90mm Diameter: 5.0mm Flute Length: 44mmAdditional Information:• …

Bosch 2608596305 Brad Point For Wood 8mm x 117mm

from £2.00 up to £2.95

Compare prices₇→

Bosch 2608596305 Brad Point Drill Bit For Wood 8mm x 117mm The Bosch 2608596305 drill bits are designed for precise drilling in soft and hard wood. They are extremely sharp with a brad point centring more→tip for exact positioning of the hole without tearing the wood. You can expect good material removal without clogging thanks to its two flutes. Features:
- Brad Point Drill Bit offers precise drilling in soft and hard wood
- Extremely sharp drill bit with centring tip allows for exact positioning of the hole
- High-quality shoulder cutters with precise edges that produce tear-free holes
- For exact results, two flutes prevent debris from clogging the hole and easily remove excess materials …

IRWIN Glass and Tile 4mm IRW10507903

from £2.95

Compare prices₃→

The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size more→4mmAdditional Information:• Diameter: 4.0mm

Sirius Professional HSS Jobber 6.2mm

from £2.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Stanley FatMax HSS-CNC 1.5mm 40mm Pack of 2 STA51008

from £2.95

Compare prices₄→

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS more→construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

Bosch 2608585845 HSS-Co Metal 3.5mm x 39mm x 70mm

from £2.00 up to £3.09

Compare prices₈→

Bosch 2608585845 HSS-Co Metal Drill Bit 3.5mm x 39mm x 70mm (Single)
The Bosch 2608585845 single drill bit has a 3.5mm diameter, a working depth of 39mm and an overall length of 70mm. The HSS T more→wist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels.…

Bosch SDS Plus 5 Masonry 6mm 160mm Pack of 1

from £2.95

Compare prices₅→

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guid more→ance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Milwaukee Hex Shank Flat 14mm 160mm Pack of 1 4932363134

from £2.95

Compare prices₃→

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. more→1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 14mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Trend SNAPPY HSS 5/64" WP-SNAP/D/564

from £2.95

Compare prices₄→

Replacement drill bit. Specifications: • Dia Metric: 1.98 • Dia Imperial: 5/64 • Overall Length Metric: 53 • Type or Grade: No.4

Faithfull Long Series HSS Jobber 2.5mm 95mm Pack of 2 FAIPP250LS

from £2.95

Compare prices₃→

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufact more→ured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP250LS Pre Pack HSS Jobber Drills Long Series 2.5mm have the following specifications:Diameter: 2.5mm. Overall Length: 95mm. Pack quantity: 2.Additional Information:• …

Sealey Cold Chisel 13 x 150mm

from £3.00 up to £3.39

Compare prices₆→

• High quality drop-forged steel cold chisel with octagonal shaft design.• Black powder coated with polished tip for great resistance against corrosion.• Manufactured in accordance with BS 3066.High q more→uality drop-forged steel cold chisel with octagonal shaft design. Black powder coated with polished tip for great resistance against corrosion. Manufactured in accordance with BS 3066.• High quality drop-forged steel cold chisel with octagonal shaft design. • Black powder coated with polished tip for great resistance against corrosion. • Manufactured in accordance with BS 3066. • Model No. CC30Technical Specification:Length: 150mmNett Weight: 0.138kgDimensions: Length: 25mm x Height: 220mmWeight: 0…

Stanley HSS-R Metal 2.5mm 57mm Pack of 3 STA50015

from £2.95 up to £4.07

Compare prices₅→

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, ex more→tending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 2.5mm • Drill Length: 57mm • He…

Milwaukee Multi Material Drill 5.5mm 100mm Pack of 1 4932471094

from £2.95

Compare prices₃→

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials includin more→g; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 5.5mm • Length: 100mm • Pack Quantity: 1Features & Benefits• For use with …

Milwaukee M2 SDS Plus Masonry 5mm 110mm Pack of 1 4932307067

from £2.95

Compare prices₄→

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot dri more→lling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 10mm 120mm

from £2.95

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.10 mm x 120 mm.Additional Information:• Diameter: 10.0mm• Overall Length: 120mm• Pack Qty.: 1

Milwaukee Premium Concrete Drill 5mm 100mm Pack of 1 4932471171

from £2.95

Compare prices₃→

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and h more→olders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 5mm • Length: 100mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Sealey Worksafe Straight Shank Rotary Impact Ø11 x 300mm

from £2.84 up to £4.39

Compare prices₇→

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø11 x 300mmDimensions: Length: 1mm x Height: 380mmWeight: 0.16KgWarranty: Consumable

Stanley Hex Shank HSS Metal 2mm 66mm Pack of 1 STA50008

from £2.95

Compare prices₄→

Crafted with robust materials, the STA50008 is a resilient companion for both workshop and job site challenges. Its ergonomic design prioritizes user comfort during prolonged use, offering a secure gr more→ip and precise control. With 118° tip grinding, Stanley high speed drill bits deliver accurate holes, the Hex shank limits the drill bit slippage and enhances power tool compatibility. Features & Benefits • For general purpose drilling into metal • For use in corded/cordless drills and impact drivers • Hex shank prevents bit slipping in standard drill chucks • For drilling into soft steel and nonferrous metals Specifications • Diameter: 2mm • Length: 66mm • …

Sealey Worksafe SDS Plus Ø10 x 260mm

from £2.91 up to £3.25

Compare prices₆→

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bits suitable for a variety of applications. Drills more→are fully hardened and ground.Technical Specification:Size: ø10 x 260mmDimensions: Length: 15mm x Height: 315mmWeight: 0.108KgWarranty: Consumable

Milwaukee Premium Concrete Drill 7mm 100mm Pack of 1 4932471180

from £2.95

Compare prices₃→

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and h more→olders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 7mm • Length: 100mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

CK Tools C.K Masonry 8x150mm

from £2.42 up to £2.95

Compare prices₄→

Masonry Drill Bit 8x150mmC.K Masonry Drill Bit 8x150mm~ Forged steel with tungsten carbide tip~ Optimised design for fast and accurate drilling of concrete, stone & brick~ Diameter: 8 mm~ Total length more→: 150 mmTechnical DataDiameter: 8mmOverall length: 150mmComponent Material:Tungsten tip, Forged Steel Technical Specification:CE Certified: NoConflict Materials Content : yesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety gogglesDimensions: …

Sirius Professional HSS Jobber 0.4mm

from £2.95

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

24 more item(s)