Drill Bits

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

The CYL-9 MultiConstruction Drill Bit delivers stable drilling in all kinds of materials. Its centring tip provides a steady drilling start and good guidance universally. The diameter-optimised AWB brazing and hardening technology increases the robustness of the 2-cutter drill bit and reduces vibration during use. Additionally, the bit's 4-flute dura design with a reinforced core section delivers better wear resistance and stability when drilling soft concrete. The bit is intended for practically all materials in interior fitting work, e.g. soft concrete, masonry, brick, cement asbestos, light building materials, multilayer materials, ceramics and tiles, wood, plastic, sheet metals and aluminium.…

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

The Multi-Sharp® ATT2003 Silicon Carbide Replacement Grinding Wheel fits the ATT 2001 Multi-Sharp® Drill Bit Sharpener.For resharpening masonry and hammer bits, flat wood bits and re-edging small tools. Comes with two replacement nylon bearings and fitting instructions. Specifications: Diameter: 36mm.Max 3000rpm.Additional Information:• Type: Replacement Part

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

The Stanley Flatwood Drill Bit is high quality combined with other hard materials with modern design. Quick drilling without the “drill” effect thanks to the special construction of the drill head. Clean CNC burr holes used in the production and unique tip design make this drill ideal for drilling in wood. With its superior construction, this drill bit ensures longevity and reliability throughout extensive use. The solid steel body offers enhanced strength and stability, resulting in a longer lifespan compared to other standard drill bits. Features & Benefits • Ground central point for accurate drilling • Cutting edges for fast, clean drilling • Hex shank prevents bit slipping in s…

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet. Features & Benefits: • Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet. • Model No. SS12X600 Specifications: Model No SS12x600 Brand: Worksafe Size: Ø12 x 600mm

This hex shank flat wood drill bit has a precision double ground tri-point for fast waste removal and enhanced cutting performance. Made from hardened and tempered carbon steel. Suitable for drilling holes in softwood, medium hardwood, particle board, plasterboard and plastics. The hex shank prevents the bit from slipping from the chuck, enabling a quick change. Compatible with standard drill drivers and drills with a 10/13mm standard chuck. Specifications: Diameter: 35mm Length: 152mm Shank type: Hex shank Shank size: 6.35mm Type: Double ground Point style: Tri-point Weight: 52g

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 170 x 16mm (6.3/4 x 5/8in).Additional Information:• Length: 170mm (6.3/4in)• Width: 16mm (5/8in)

This Faithfull Ball-Ended Rotary Rasp is suitable for use in wood. It rapidly removes material from soft and hardwoods. For use in electric drills. Size 12 x 35 mm. Shank 6 mm.

The Dormer A100 HSS Jobber Drill Bit Letter Size is a premium quality tool designed for precision drilling across various materials. Crafted from High-Speed Steel (HSS), this drill bit ensures exceptional durability and strength. Engineered with a 118-degree point angle, the Dormer A100 drill bit provides excellent centering capabilities, minimising the risk of walking on the workpiece. Its straight shank design fits securely in standard drill chucks, enhancing stability and accuracy during use. Features & Benefits • High Speed Steel • DIN 338 • 118° Point Angle

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.13 mm x 150 mm.Additional Information:• Diameter: 13.0mm• Overall Length: 150mm• Pack Qty.: 1

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 6.0mm • Overall Length: 123mm • Working Length: 57mm • Quantity: 1

Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet. Features & Benefits: • Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. • Fully hardened with a screw point to aid location and smooth drilling. • Supplied in a plastic wallet. • Model No. AW18X235 Specifications: Model No AW18x235 Brand: Worksafe Size: Ø18 x 235mm

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

Drill Bit 8.5 x 117 x 75 hss thunderweb

High carbon steel hardened and tempered. Shank diameter 6mm. For use with power drills. In plastic hang up wallets. Contents: 1 x Extra Long Flat Wood Bit, 13mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Expert Quality, metric-sized high speed steel drills (with 5% COB alt). The addition of COB alt to HSS prevents wear for longer life. Contents: 1 x HSS Cobalt Drill Bit, 7.0mm

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet. Features & Benefits: • Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet. • Model No. SS13X400 Specifications: Model No SS13x400 Brand: Worksafe Size: Ø13 x 400mm

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 5 mm Length 60 mmAdditional Information:• Diameter: 5.0mm

Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground. Features & Benefits: • Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground. • Model No. SDS15X210 Specifications: Model No SDS15X210 Brand: Worksafe Size: Ø15 x 210mm