Car Subwoofers Redpower 31003  all car subwoofers →

Space-saving subwoofer solution Recommended power: 800 – 2500 watts. Voice coil 63 mm copper Long-stroke sandwich beading. Solid cast aluminium basket

Spoked Subwoofer Grille designed for Kicker Comp,CompVT, CompVR, CompVX, and Solo Classic subwoofers series Simple installation Stylish black metallic finish Protects exposed Subwoofer from potential damage Dimensions: 10" (25cm)

High quality front bass reflex subwoofer enclosure, technical data: Housing Type bass reflex, Net Volume 70 L Diameter: 300 mm. 2 x 30 cm chassis with IMPP membrane Power Handling 700 WRMS, Impedance 2 x 2 Ohm Dimensions 820 x 365 x 390 (290) mm

Car Subwoofer Speaker / Diameter 178 mm / 7 Inch / 90 watt / Nominal Load 60 Watt / 88 dB / Impedance 2 x 4 Ohm

100 watts RMS 300 Watts Maximum Impedance 4 Ohm 16.5 cm SPL 90db 1 W 140 mm, 42 mm/1 m frequency response: 35 Hz – 21 kHz EÖ: Woofer Tweeter et: 47 mm, 14 mm woofer tweeter

10"/250mm Subwoofer Grille for Kenwood KFC-W2516PS 1 Grille Only. Subwoofer on the photo is not included.

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Flat Subwoofer / Nominal Load 130 Watt

10-Inch Cast Aluminum Subwoofer Grille Enhances the look of your 08 Series Kicker Solo-Baric subwoofers Protects the sub from damage This grill is sure to give your woofer an attractive look Compatible with: 11S10L74, 11S10L72, 08S10L74, 08S10L72, 08S10L54, and 08S10L52

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Car Subwoofer Speaker / Diameter 381 mm / 15 Inch / 1.800 watt / 88 dB

Optimally blended pulp cone reproduces natural sound with a smooth frequency response Rubber surround supports the linear movement while reducing unwanted resonance Powerful strontium magnet precisely drives the cone and delivers clear sound Wide sound dispersion expands the listening sweet spot Unique fixture provides flexible mounting options, designed to fit a variety of locations

Car Subwoofer Speaker / Diameter 380 mm / 15 Inch / 3.000 watt / Nominal Load 1.000 Watt / 89 dB / Impedance 2 x 2 Ohm

Made for marine use: Life on the water can be hard on audio gear, with sun, spray, salt, and extreme temperatures, not to mention post-cruise washdowns and the occasional loose fish on the deck. This rugged JBL sub is ready for it all, with a one-piece polymer basket, marine-ready componentry, stainless steel mounting hardware, and a sealed, UV-resistant grille that will stand up to spray and sunlight for years to come. IPx5 Rated: Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating Power handling: 200 watts RMS (600 watts peak power) / Sensitivity: 88 dB at 2.83 volts / Frequency response: 30-250 Hz / Impedance: 4 ohms Available …

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G