150 mm cutting discs

Lasts up to 50x longer than a Bi-Metal blade in tough materialsCutting out windows for replacement or during demolition was a tough job when it involved sawing multiple window materials such as steel-reinforced wood or plastic. Since window fixing screws started using high-tensile engineering steel, the old Bi-Metal blades don’t get through a single screw.The Bosch Expert ‘Window Demolition’ Reciprocating Saw Blade is a window demolition blade for the modern era. Backed by Bosch Carbide Technology, its teeth tear through the toughest, strongest fixing screws – and survive to do it again. The short length, tapered tip and side set carbide teeth are all designed with the specific task in mind:…

It features a 1/2 inch universal shank. The S 713 AW Clean for Fibre Insulation Reciprocating Saw Blade delivers clean curved and plunge cuts in special materials. Its sharp, serrated knife edge produces tear-free results, while the blade’s recessed body provides ultimate curved-cutting capabilities. Moreover, the serrated edge and a pointed tip make plunge cutting possible. Made from HCS (high carbon steel), the blade is appropriate for cutting fibre insulation materials. Its standard length of 150 mm enables a cutting capacity of up to 100 mm. The blade is ideal for use with cordless compact saws.S 713 AWHCS, blade with serrated edgeEspecially optimised for use in compact saws.Specially fo…

Lasts up to 50x longer than a Bi-Metal blade in tough materialThe sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbers, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential.The Expert ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind.The Bosch Expert ‘Fiber Plaster’ Reciproc…

The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials. The Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials. Its high-quality precision-ground carbide teeth make the blade robust enough for cutting various materials, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in non-ferrous metals, aluminium, plastics, epoxy and wood. • Powerful Cuts in a Wide Range of Materials • Multi Material …

The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth …

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, aluminium and non-ferrous metals. Specifications • Diameter: 150 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

The Extreme Runtime series of accessories have been designed primarily to give maximum performance with DeWalt Flexvolt power tools. These reciprocating saw blades are constructed with M42 HSS steel and have a tough coat outer later for reducing heat and friction, delivering enhanced performance and longer lifetime. Features & Benefits • Extreme Runtime Accessories optimised for Flexvolt Power Tools • Increased Efficiency for maximum Cordless Run Time • Full Tooth HSS • M42 HSS (+8% Cobalt) • 2X Life versus standard blades • Additional runtime / cuts per charge with Flexvolt battery & tool • Variable Tooth Design (increased Blade Efficiency, reduces tooth …

Pack of five BIM reciprocating saw blades manufactured to a high quality with progressive tooth pitch. For fast straight cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection. These blades are similar to Bosch S123XF blades.

Pack of five BIM reciprocating saw blades manufactured to a high quality. For flexible cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals of 3-10mm thickness. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Expert Quality. Display packed five blades per pack.

Pack of five reciprocating saw blades made from high-carbon steel manufactured to a high standard. For fast curved plunge cutting of hardwood, softwood, plywood, plastic and laminate. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection.

These Faithfull Sabre Saw Blades BIM Demolition are high-quality blades manufactured for precision and stability. These bi-metal, flexible straight-cut blades are designed for making quick, coarse cuts and general demolition work. Manufactured for precision and stability when cutting. They can be used on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick.Pack of 5 Faithfull S611DF Bi-Metal Sabre Saw Blade Demolition 150mm 6 TPIAdditional Information:• Application: Demolition• Length: 150mm• TPI: 6• Pack Qty.: 5

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most …

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most …

These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S918E …

These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S918H …

These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull …

Pack of 5 Faithfull S922HF Bi-Metal Sabre Saw Blades Demolition 150mm 10 TPI

The Irwin® Sabre Saw Blades 606R Wood Cutting have superior construction and design, making them both faster cutting, and longer lasting.For fast cutting wood, composition material and plastic. Suitable for use with materials 5 mm (3/16in) and thicker. Specifications: Length: 150 mm.Teeth: 6 tpi.Pack of 5.Additional Information:• Application: Wood• Length: 150mm• TPI: 6• Pack Qty.: 5

IRWIN® Metal & Wood Cutting Sabre Saw Blades. Superior construction and design make them faster cutting and longer lasting. Labelling on the blade makes it easy to identify the right blade for the right application. Suitable for cutting materials which are 3.2mm (1/8in) and thicker. Such as plastic, wood, carbon steel and stainless steel.Pack of 5 IRWIN® 610R Metal & Wood Cutting Sabre Saw Blades 150mmAdditional Information:• Application: Metal & Wood• Length: 150mm• TPI: 10• Pack Qty.: 5

IRWIN® Metal & Wood Cutting Sabre Saw Blades. Superior construction and design make them faster cutting and longer lasting. Labelling on the blade makes it easy to identify the right blade for the right application. Suitable for cutting materials which are 3.2mm (1/8in) and thicker. Such as plastic, wood, carbon steel and stainless steel.Pack of 2 IRWIN® 610R Metal & Wood Cutting Sabre Saw Blades 150mmAdditional Information:• Application: Metal & Wood• Length: 150mm• TPI: 10• Pack Qty.: 2