Drill Bits

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The SDS plus-9 RebarCutter Drill Bit is specially designed for cutting through rebar in reinforced concrete. Its firmly fixed carbide teeth are uniquely shaped to maximise drilling speed and wear resistance. The bit´s steep 2+2 flute design enables optimum dust removal and long lifetime. Moreover, this flute design is also vibration-optimised for the best power transfer and speed. Additionally, a ventilation hole in the bit dissipates heat and enables metal chip removal. Do not cut through rebar unless a structural engineer issues approval. It is compatible with rotary hammers with SDS plus holders and should be used without impact. Pack of 1 • Specially Designed for Cutting Through R…

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expenctancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

This SDS max steel clay spade is made from specially toughened steel which ensures tough bits and micro-processor controlled heat treatment providing for consistently tough, long life chisels. Applications: Excavating and removing clay. Breaking hard-packed gravel and soil. Excavating. Loosening and breaking up hard ground.

• HSS Dura 50 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 28 mm

• HSS Dura 50 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 29 mm

• HSS Dura 25 core bit with QuickIN holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 32 mm

• HSS Nova 50 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 50 mm. Specifications: Cutting depth: 50 mm Bore Ø: 48 mm

• TCT Ultra 50 core bit with FEIN thread M 18 x 6 P 1.5• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 32 mm

• TCT Ultra 50 core bit with FEIN thread M 18 x 6 P 1.5• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 34 mm

• TCT Ultra 50 core bit with FEIN thread M 18 x 6 P 1.5• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 33 mm

High quality stepped drill bit by Wera. 9 drill steps increasing by 2 mm for material with a maximum thickness of 4.5 mm. Comes with edge breaker for 1 mm sheet metal. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • 9 drill steps increasing by 2 mm • For material with a maximum thickness of 4.5 mm • With edge breaker (sheet metal deburrer) at diameter 10 • For 1 mm sheet metal • 1/4" hexagon suitable for holders as per DIN ISO 1173-D 6.3 Contents: 843 Stepped drill bits, 4-20 mm, 75 mm

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

The Dormer A101 HSS Left Hand Jobber Drill Bit is a high-quality tool designed for precision and durability. Made from premium High-Speed Steel (HSS), this left-hand drill bit is ideal for reverse drilling applications, making it perfect for removing broken bolts and studs. Featuring a 118-degree point angle, the Dormer A101 provides precise centering and reduces the risk of walking on the workpiece. The left-hand twist is specifically engineered for use in reverse rotation, offering unique advantages in specific drilling tasks and maintenance operations. Features & Benefits • High speed steel • Steam tempered • DIN 338 • 118° point angle • Left hand version Specifications …