Drill Bits

1.3/4" Bormax 2.0 Imperial Forstner Bit, 1622237 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162223700

• Tri-point, self-centring tip allows for a quicker cut.• Three flatted shank for improved chuck grip in sizes 5mm and above.• Engineered design allows drilling on curved surfaces.• Sizes: ø1-13mm in 0.5mm increments.• Supplied in a plastic storage case with rubber corner protectors.Tri-point, self-centring tip allows for a quicker cut. Three flatted shank for improved chuck grip in sizes 5mm and above. Engineered design allows drilling on curved surfaces. Supplied in a plastic storage case with rubber corner protectors.• Tri-point, self-centring tip allows for a quicker cut. • Three flatted shank for improved chuck grip in sizes 5mm and above. • Engineered design allows drilling on curv…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Expert Quality, manufactured from high carbon steel hardened and tempered. Chisels are finely ground and polished with honed cutting edges. Chisel shank diameter 13/16" (Stock No. 48080 is 1.3/16"). Display packed.

Suitable for cutting granite, marble, limestone, slate, hard bricks and other dense, non abrasive materials. Specifications • Diameter: 127mm • Overall Length: 150mm • Fitting: 1/2 BSPFeatures & Benefits• Fast cutting ability in granite, marble and most hard materials • Can be used with dust extraction • Suitable for granite, marble, limestone, slate, hard bricks, engineering bricks & dense materials • Features 5mm useable diamond segments brazed to a solid core

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Features & Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry delivers maximum hole concentricity for better fixing retention • Optimised four flute design allows …

Engineered for durability and performance, these high-speed steel drill bits are designed to tackle tough metal surfaces with ease. The innovative split point tip ensures accurate drilling and prevents wandering, allowing for precise hole placement every time. Crafted from high-quality materials, these drill bits feature a robust construction that withstands the demands of heavy-duty use. The precision-ground flutes provide efficient chip removal, reducing friction and heat buildup for extended tool life. Features & Benefits • Permanent size markings located above shank for increased visibility • Suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm² • …

• TCT Ultra 75 core bit with 3/4 in Weldon holder• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 75 mm.Specifications:Cutting depth: 75 mmBore Ø: 30 mm

Guhring No 201 24 Piece HSS 1.0 -10.5mm By 0.5mm drill bit set. Includes 4 standard tapping sizes: M4, M5, M8 and M12. Type N DIN 338. For drilling steel and cast steel, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. 118° point angle. Supplied in a metal indexed case. All Guhring drills are manufactured in Germany using quality German steel. Specifications • Diameter: 1.0mm - 10.5mm • Increasing By: 0.5mm • Pieces in Set: 24 • Guhring Code No: 0.018 • Optimal Suitability: Steel, High Alloyed Steel, Grey Cast Iron, Spheroidal Graphite Iron, Malleable Cast Iron • Limited Suitability: Aluminium, other Non Ferrous Metals • …

Rotabroach is the original name in annular cutting technology with over 40 years of experience. Rotabroach tungsten carbide tipped cutters are manufactured with super micro-grain carbide tips for a long tool life in the toughest of materials. The tips are 50% Tungsten / 50% Carbide. Rotabroach TCT cutters are harder and able to resist higher temperatures - resulting in less wear and providing a longer tool life. The special Rotabroach 3 tooth geometry provides even tooth loading for a smooth and vibration free cut. Ideal for drilling into construction steel, stainless steel, rail track, high strength steel, Hardox and Inconel.

Rotabroach is the original name in annular cutting technology with over 40 years of experience. Rotabroach tungsten carbide tipped cutters are manufactured with super micro-grain carbide tips for a long tool life in the toughest of materials. The tips are 50% Tungsten / 50% Carbide. Rotabroach TCT cutters are harder and able to resist higher temperatures - resulting in less wear and providing a longer tool life. The special Rotabroach 3 tooth geometry provides even tooth loading for a smooth and vibration free cut. Ideal for drilling into construction steel, stainless steel, rail track, high strength steel, Hardox and Inconel.

Rotabroach is the original name in annular cutting technology with over 40 years of experience. Rotabroach tungsten carbide tipped cutters are manufactured with super micro-grain carbide tips for a long tool life in the toughest of materials. The tips are 50% Tungsten / 50% Carbide. Rotabroach TCT cutters are harder and able to resist higher temperatures - resulting in less wear and providing a longer tool life. The special Rotabroach 3 tooth geometry provides even tooth loading for a smooth and vibration free cut. Ideal for drilling into construction steel, stainless steel, rail track, high strength steel, Hardox and Inconel.

Rotabroach is the original name in annular cutting technology with over 40 years of experience. Rotabroach tungsten carbide tipped cutters are manufactured with super micro-grain carbide tips for a long tool life in the toughest of materials. The tips are 50% Tungsten / 50% Carbide. Rotabroach TCT cutters are harder and able to resist higher temperatures - resulting in less wear and providing a longer tool life. The special Rotabroach 3 tooth geometry provides even tooth loading for a smooth and vibration free cut. Ideal for drilling into construction steel, stainless steel, rail track, high strength steel, Hardox and Inconel.

Rotabroach is the original name in annular cutting technology with over 40 years of experience. Rotabroach tungsten carbide tipped cutters are manufactured with super micro-grain carbide tips for a long tool life in the toughest of materials. The tips are 50% Tungsten / 50% Carbide. Rotabroach TCT cutters are harder and able to resist higher temperatures - resulting in less wear and providing a longer tool life. The special Rotabroach 3 tooth geometry provides even tooth loading for a smooth and vibration free cut. Ideal for drilling into construction steel, stainless steel, rail track, high strength steel, Hardox and Inconel.