Multi Tool Blades

The Detail Abrasive Brushes have very flexible bristles which allow removal of the exterior "surface layer" without damaging the base layer below. These brushes can be used for deburring, cleaning, finishing, and polishing of detailed parts, tiny areas and irregular places.Specifications:Shank diameter: 3,2 mm Working diameter: 25,0 mm Grit: 120 Maximum RPM: 15.000 1/min

Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts. Technical specifications: Length: 100mm Cutting depth: 3mm. Teeth per centimeter: 10 Blade width: 0.2mm. Blade depth:1.9mm.

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue and can be used endlessly.Specifications:Size: 20 x 20 cm

Precision saw blade for fine, clean and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. Use only with Dremel Mini Saw attachment 670. Made of carbon steel, 48 offset teeth guarantee precise, fast cuts up to 6.35 mm. Blade size: 31.8 x 0.6 x 9.2mm Working diameter:31.8mm. Maximum working depth: 6.4mm. Maximum speed: 35,000rpm Essential attachment: Mini Saw Attachment Ref. 670.

• Set includes soft brass, steel wire brushes and nylon brushes.• Crimped brushes with flat and pointed fill.• For cleaning, dusting, polishing and surface preparation in small confined areas.• Compatible with Sealey and most popular branded rotary tools.Set includes soft brass, steel wire brushes and nylon brushes. Crimped brushes with flat and pointed fill. For cleaning, dusting, polishing and surface preparation in small confined areas. Compatible with Sealey and most popular branded rotary tools.• Set includes soft brass, steel wire brushes and nylon brushes. • Crimped brushes with flat and pointed fill. • For cleaning, dusting, polishing and surface preparation in small confined areas. • Compa…

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Straight Bits• General purpose routing or groovingSpecifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Usage: StraightMaximum RPM: 35.000 1/min

For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced cut-off wheels (456, 426, 426B) are for tough applications. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. Use Dremel cut-off wheels with mandrel 402.Specifications:Shank diameter: 3,2 mm Working diameter: 24,0 mmPack of 20

This Faithfull diamond boot blade will remove tough grout from between tiled surfaces. Its efficient shape allows aggressive grinding without damaging the tile. A long lasting blade which enables continuous work on large projects. Compatible with many multi-function oscillating power tools.Additional Information:• Type/Use: Tiling• Size: 65mm

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.Specifications:Shank diameter - 3.2 mmWorking diameter - 0.8 mmMaximum RPM: 35.000 1/minPack of 3

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• V-Groove Bit• For sign word and lettering Specifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Usage: V-GrooveMaximum RPM: 35.000 1/min

Straight Bits. General purpose routing or grooving.Features & Benefits:• Straight Bits • General purpose routing or grooving Technical specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Usage: StraightMaximum RPM: 35.000 1/min

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.Specifications:Shank diameter - 3.2 mmWorking diameter - 3.2 mmPack of 2

This Faithfull saw blade has a broad range of applications with its carbide grit edge. It will cut out damaged tile joint and cuts grooves in plaster, porous concrete and similar construction materials. Compatible with many multi-function oscillating power tools.Additional Information:• Type/Use: Tiling• Size: 65mm

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.Specifications:Shank diameter - 3.2 mmWorking diameter - 1.9 mmMaximum RPM: 35.000 1/minPack of 3

DREMEL
2 Years

For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced cut-off wheels (456, 426, 426B) are for tough applications. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. Use Dremel cut-off wheels with mandrel 402.Specifications:Shank diameter: 3,2 mm Working diameter: 24,0 mmPack of 36

Dremel saw blade for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts.Specifications:Total length: 100 mmCutting depth: 12 mmTeeth per cm: 6Pack of 5

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

- Fits EZ Lock mandrel for fast and easy accessory changes - Can be used for general sanding purposes - Ideal grit for pet nail grooming

Pack of 15 popular oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. The sanding sheets are suitable for a wide range of surfaces. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.

The drywall cutting bit 560 gives you fast clean cuts in drywall. The multipurpose cutting bit 561 cuts wood, plastic, fiberglass, drywall, laminate & vinyl siding. The tile cutting bit 562 cuts ceramic wall tile, cement board and blaster. (Not for use on floor tile)Specifications:Shank diameter: 3,2 mm Working diameter: 3,2 mm Pack of 3

The Bosch 2608662343 Multi-Tool Blade Set will fit a variety of machines from a range of brands The Bosch 2608662343 is a 3 piece universal set with two blades that are suited to cutting wood and one for cutting wood and metal. These blades will fit Bosch, Fein, AEG, Hitachi, Makita, Metabo, Milwaukee, Ryobi and Skil machines.  Contains:  
- 1x HCS plunge cut saw blade Wood 
- 1x Carbide segment saw blade Wood 
- 1x BIM plunge cut saw blade Wood and Metal   Specification: 
- Weight: 0.3kg 
- Product line: PRO accessories 3-piece universal set 
- Part number (EAN): 2 608 662 343 (3165140779654) 

This versatile Sirius blade set for oscillating multi tools contains a selection of blades for cutting common construction materials including wood, metal and plastic. Black oxide coating helps to ensure corrosion resistance, an etched metric scale on the blade to helps to guide the depth of cut, and a universal arbor design means they are compatible with a wide range of oscillating multi tools, including the models listed below. Suitable for: • Einhell: BT-MG220E,RTMG200E,TEMG200 • Fein: Multi Master • Bosch: GOP,POF (Not Starlock) • Draper: MT, COMT • Makita: TM3000C,DTM50,TM3010,DTM51,TM30 • Dewalt: DWE315 , DCS356 , DWE355 • Stanley Black and Decker: MT280 …

With a flexible 30mm width, this scraper adapts seamlessly to different surfaces, providing optimal contact for efficient and thorough scraping. The Fatmax Flexible Scraper is engineered for durability, ensuring it withstands the rigors of demanding projects, while the ergonomic design ensures comfortable use over extended periods. Ideal for working on intricate surfaces and achieving smooth results, this scraper is a must-have addition to your toolkit. Features & Benefits • For removing hard adhesives such as those used for carpet tiles • Tool free blade change system making blade change quick and easy • For use with Stanley Fatmax, Black and Decker Oscillating multi tools Specifications …