Multi Tool Blades

The fastest, easiest way to sharpen dull, slow-cutting chain saws. Easily attaches to your Dremel rotary multi tool. Compatible with all Dremel rotary multi tools, with the exception of some 4200 models.Features & Benefits• Complete chainsaw sharpening kit for Dremel multi tools • Get your chainsaw to cut like new in a matter of minutes • Select the grinding stone which most appropriately matches your chain • Attach the sharpening angle guide by unscrewing the nose cap on your tool and screwing it on • Follow the sharpening angle guide for perfect results

This 20 piece woodworking set contains a variety of carving, engraving and sanding tools for use with Dremel rotary tools The Dremel 2615C681JA is a 20 piece woodworking set that contains a variety of different carving, engraving, sanding and drilling accessories designed for use with the Dremel rotary tool. Use these accessories on both hard and soft wood in many DIY projects. Features: The ideal start-up kit for DIY woodworking applications like carving, engraving, sanding and drilling Comes with a reusable storage case and 20 genuine Dremel accessories Can be used on both soft and hard wood Compatible with all Dremel Multi-tools Comes with: 1 x High Speed Cutter 3.2 mm (190) 1 x High Speed …

Bosch offers the ideal accessories for virtually all applications
Bosch's efficient dust extraction unit allows you to work without dust
Material: plastic
Appropriate for GOP 300 SCE Professional

Diamond Engraving Point. For usage with the Dremel Engraver 290. The Diamond Engraving Point 9929 has a longer lifespan and is for use on harder materials such as glass.

Expert Sanding Plate For Long Life Sanding Multi Material:- Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Even if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool.- The coarse, open grains of the RT2 (grit size 20) are best for removing mortar behind tiles, removing carpet adhesive, or rough shaping of wood. The RT4 (grit size 40) is best for removing thick paint but can also tackle mortar and glue if required. The RT6 (grit size 60) is the paint specialist, while …

Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Even if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool.- The coarse, open grains of the RT2 (grit size 20) are best for removing mortar behind tiles, removing carpet adhesive, or rough shaping of wood. The RT4 (grit size 40) is best for removing thick paint but can also tackle mortar and glue if required. The RT6 (grit size 60) is the paint specialist, while the RT10 (grit size 100) is ideal for sanding and preparing …

The DSM600 is a multipurpose carbide flush cutting disc. This abrasive cutting wheel with carbide grit is designed for doing straight, flush and plunge cuts in softwood, hardwood, plywood, laminates, fibreboard, plastic, drywall/plasterboard, plexiglass and vinyl. Diameter: 75mm. Depth of cut: 20mm. Maximum speed: 17,000rpm.

Pack of 8 popular oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.

The Plumbers Kit has a great selection of blades that every plumber needs and would use on a regular basis. Fine and Japanese tooth blades for cutting access holes and Bi-Metal blades for cutting out old timber and through old nails. Very popular set of 4 blades. Includes: 32mm and 63mm fast cutting Japanese tooth blades And 32mm and 44mm Bi-Metal blades for cutting timber and nails. To increase the blade life when cutting nails and steel, reduce the speed by 2 settings and move blade side to side while cutting. PLEASE NOTE These accessories are not compatible with Fein 'Starlock' fittings. Specifications • Tool Fitting: Smart Quick Release Shank • Blade Width: 2x 32mm, 44mm 64mm • …

A great assortment of the four most commonly used multi-tool cutting blades, perfect for most tradesmans everyday cutting needs. High quality multi-tool blades Includes accessories to cut wood, plastic, nails, plasterboard and fibreglass Universal quick-release fitment: Fits most main brands of multi-tool. (Not Starlock) 4 Pieces Includes 1 x 32mm Bi-Metal Blade, 1 x 32mm Fine Tooth Blade, 1 x 32mm Japanese Tooth Blade, 1 x 63mm Japanese Tooth Blade

The DSM500 is a multipurpose carbide cutting disc. This abrasive cutting wheel is designed for doing straight and plunge cuts into wood and other soft materials. Specifications • Working Diameter: 20.0mmContents• Pack of 1

Use your Dremel multi-tool to get the clean, defined circles you´re looking for.Use the included straight edge guide to cut or route perfectly straight lines.The circle cutter is fully adjustable up to 30 cm in diameter and allows you to create circles for different tasks.The steel design of the accessory is designed to reduce wear during use and extend its useful life in the workshop.Contents:1 Straight Edge Guide, 1 Circle Cutter Attachment, 1 Multi-Purpose Cutting Bit (561) and 1 Manual/Quick Start Guide.Length:11:cm.Width:4:in.Depth:4.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to buy (online dealer):Use your Dremel multitool to get the clean, defined circles you´re looking for:Product bo…

The heavy-duty Dremel Max Premium Cutting Wheel SC456DM is is coated with super abrasive grit called cubic boron nitride (CBN) which provides maximum durability allowing the wheel to remain sharp longer, stay cool, and prevent shrinking. The Max Premium Metal Cutting Wheel lasts 20 times longer than the regular 426 Cutting Wheels and is reinforced with a metal core to prevent breaking.The high-performance cutting wheel features a 38.1 mm diameter and 1 mm thick blade making it ideal for cutting a variety of materials including stainless steel, nails, rebar, metal studs, threaded rod, copper, conduit, metal HVAC ducts, metal door jambs, and galvanized strut. The SC456DM is designed with the patented …

The Electricians Kit has a great selection of blades that any electrical engineer needs and would use on a regular basis. Fine and Japanese tooth blades for cutting access wholes and Bi-Metal blades for cutting out old timber and through old nails. Very popular set of 4 blades. Includes: 32mm and 63mm fast cutting Japanese tooth blades And 32mm and 44mm Bi-Metal blades for cutting timber and nails. PLEASE NOTE These accessories are not compatible with Fein 'Starlock' fittings. Specifications • Tool Fitting: Smart Quick Release Shank • Blade Width: 2x 32mm, 44mm 64mm • Depth of Cut: 42-52mmFeatures & Benefits• Great selection of blades that any electrical engineer needs • …

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, leather, ceramic tile. Shank Diameter: 3.2mm. working Diameter: 7.8mm. Accessory length: 40mm. Maximum speed: 35,000rpm.

This versatile Sirius blade set for oscillating multi tools contains a selection of blades for cutting common construction materials including wood, metal and plastic. Black oxide coating helps to ensure corrosion resistance, an etched metric scale on the blade to helps to guide the depth of cut, and a universal arbor design means they are compatible with a wide range of oscillating multi tools, including the models listed below. Suitable for: • Einhell: BT-MG220E,RTMG200E,TEMG200 • Fein: Multi Master • Bosch: GOP,POF (Not Starlock) • Draper: MT, COMT • Makita: TM3000C,DTM50,TM3010,DTM51,TM30 • Dewalt: DWE315 , DCS356 , DWE355 • Stanley Black and Decker: MT280 …

All you need for cleaning and polishing in a convenient box. Removable accessory tray and 3 dividers provide perfect storage solution Dremel Quick Start leaflet explains the included accessories Supplied in a display carry case Kit contains: 1x each 3.2mm (405), 13mm (404) and 19mm (403) bristle brushes 1x 19mm carbon steel brush (428) 1x 10mm polishing point (422) 6x 13mm (414), 2x 22.5mm (425), 3x 26mm (429) polishing wheels 1x 13.2mm impregnated polishing wheel (520) 1x each 35mm (402) and 39mm (401) mandrels 1x polishing compound (421)

This diamond-impregnated core-style bit features superior long life Is ideal for drilling holes in both flat and contoured surfaces e.g. glass or ceramic wall. Diamond grit is a full 360-degrees around the circumference of the bit which allows it to be used in a rasping action to enlarge a hole if needed. When cutting a hole, ensure your work piece is well secured and do not apply excessive pressure to avoid cracking the glass. Apply cooling liquid or water to the material. Hold your tool at a 45 degree angle to go into the material. Then gradually lift your tool up to make a 90 degree drill. Apply drops of water / cooling liquid to the work piece for a clean drill operation. You can take the …

Assortment of best selling accessories in a convenient box. Removable accessory tray and 3 dividers provide perfect storage solution. Dremel Quick Start leaflet explains the included accessories. Typical Applications Ideal for medium-use DIY and hobby projects Accessories and attachments for cutting , grinding, sanding or polishing

The 4 piece tiling kit has all the accessories you need in the Kitchen or Bathroom. Set includes 3 different styles of Carbide blade for removing the grout between the tiles (Segment blade, Boot shaped Carbide blade & Straight Carbide blade) Plus a rigid scraper blade for: Removing; floor coverings, silicone, soft compounds or the adhesive left after removing a tile. Perfect for any tiler, decorator or kitchen / bathroom fitter. The 4 piece tiling kit has all the accessories you need for decorating or grout, adhesive removal. An excellent assortment of just the most commonly used styles of multi-tool blades. All in one pack for a great value blade solution. PLEASE NOTE These accessories are …

Dremel, the inventor of the Multitool, now brings you SpeedClic - an innovation that makes changing cut-off wheels extremely quick and easy. Through a patented mandrel and wheel design, Dremel has concocted a way that enables you to change your accessory in 3 simple steps - Pull, Click, Twist - without the need for any tools. Features and Benefits Replacement Dremel SpeedClic cutting wheels Highly Efficient design Notes Working diameter 25mm Shank diameter 3.2mm SC545 diamond cutting wheel SC456 metal cutting wheel (PK-5) SC456B metal cutting wheel (PK-12) SC476 plastic cutting wheel (PK-5)

Reduce labor time by quickly and freely cutting the shape or size of your choice, on walls or tile, with your Dremel multi-tool.Adjust the depth up to 20 mm on the cutting guide whenever you want.You just have to screw it to the Dremel multitool and easily change accessories depending on the material.Large guide windows offer visibility over the material to keep the user and the surface safe.Contents:1 cut control attachment and 1 Dremel spiral cutter bit (562).Working length:19.0:mm.Length:4.5:cm.Width:7:in.Depth:6:in.SOL Date:01.10.2020:Retired:No:Reasons to Buy (Online Dealer):Reduce labor time by quickly and freely cutting the shape or size of your choice, on walls or tiles, with your Dremel …

The DREMEL Multipurpose DSM600 77 mm Cutting Disc is a versatile and efficient tool accessory for electric tools. With its 77 mm size, this cutting disc is specifically designed to cut various materials with precision and ease. The cutting disc is made of high-quality, durable materials that ensure longevity and consistent performance. Its white color signifies its multipurpose nature, as it can be used for multiple applications like cutting, shaping, and grinding different materials, including wood, metal, plastic, and more. Equipped with specialized cutting teeth, this disc is capable of delivering clean and precise cuts, allowing users to achieve professional results in their projects. It …

Maximum durability and long-lasting performance carving bit for your most demanding DIY projects Lasts 2x longer than standard drill bit thanks to titanium nitride coating For carving, engraving, routing, etc.on a wide range of materials, including wood, soft metals and plastics Contents:2 Dremel® Max carving bits 6.4 mm (117DM).Shank diameter:3.2:mm.Working diameter:6.4:mm.Accessories length:38.0:mm.Width:6.0:mm.Length:6.0:mm.Height:38.0:mm.Maximum rpm:35,000:rpm.SOL Date:01.05.2021:Retired:no:Reasons to purchase it (online distributor):Carving bit with maximum durability and long-lasting performance for your most demanding DIY projects:Product box length:5:cm.Product box height:10:cm.Product b…