Drill Bits

prices on 16314 models

Show

Sealey Worksafe Straight Shank Rotary Impact Ø11 x 150mm

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø11 x 150mmDimensions: Length: 1mm x Height: 230mmWeight: 0.07KgWarranty: Consumable

Sirius Professional HSS Jobber 2.5mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull HSS Jobber Metric 8.5mm FAIJ850

from £1.49

Compare prices₃→

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or p more→ower drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.8.50mm.Additional Information:• Tip Diameter: 8.5mm• Working Length: 72mm• Overall Length: 117mm• Pack Qty.: 1

Faithfull HSS Jobber 7mm 109mm Pack of 1 FAIPP700

from £1.49

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 7.0 mm Dia.Additional Information:• Tip Diameter: 7.0mm• Working Length: 69mm• Overall Length: 109mm• Pack Qty.: 1

Draper Wood , 8mm

from £1.49 up to £2.47

Compare prices₆→

Expert Quality, manufactured from hardened and correctly tempered carbon steel. Suitable for use with hand and power drills. Packed one or two drill bits per hang up card.

Draper 2.05mm HSS Twist Drill for 2.5 x 0.45 Taps

from £1.38 up to £1.87

Compare prices₆→

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills more→per card (sizes 1.6-3.3mm).

Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 5mm 85mm FA

from £1.49

Compare prices₃→

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion more→drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5 mm x 85 mm.Additional Information:• Diameter: 5.0mm• Overall Length: 85mm• Pack Qty.: 1

Sirius Professional HSS Jobber 1mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

IRWIN Joran Pro Masonry - you get 10

from £1.49 up to £2.79

Compare prices₄→

Designed for fast and efficient drilling in brickwork, concrete and breeze block. Drills up to 60% faster than competitive drill bits and still with the same high durability. Unique, pressed carbide t more→ips for aggressive cutting. Drill speed up to 60percent faster than competitive drill bits whilst maintaining the same high durability. Single flute design. Pressed diamond-ground carbide tip. Unique carbide tip design. Chrome vanadium body. High durability.

Sealey Worksafe Straight Shank Rotary Impact Ø8 x 150mm

from £1.44 up to £1.65

Compare prices₇→

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 150mmDimensions: Length: 3mm x Height: 230mmWeight: 0.045KgWarranty: Consumable

Faithfull HSS Jobber 1.5mm 40mm Pack of 3 FAIPP150

from £1.49

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 1.5mm. Pack of 3Additional Information:• Tip Diameter: 1.5mm• Working Length: 18mm• Overall Length: 40mm• Pack Qty.: 3

Faithfull HSS Jobber Imperial 3/16" FAIJ316

from £1.49

Compare prices₃→

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in more→hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.3/16in.Additional Information:• Tip Diameter: 3/16in• Pack Qty.: 10

Stanley Masonry 4mm 75mm Pack of 1 STA53080

from £1.49

Compare prices₄→

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel constr more→uction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

Bosch HSS PointTeQ 1mm Pack of 2 2608577153

from £1.49

Compare prices₅→

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its more→increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

IRWIN Brad Point 3mm

from £1.33 up to £2.09

Compare prices₅→

The Irwin IRW10502792 Brad Point Drill Bit comes in the following: Size: 3.0 x 67mm Note: Image is for illustrative purposes only and may differ from the actual product

DeWALT DT6552-QZ 5.50mm x 150mm Masonry

from £1.38 up to £1.49

Compare prices₂→

The DEWALT Rotary/Percussion Masonry Drill Bits have 130 Douglas Form carbide tips. They are ideal for drilling anchor, plastic, fixing or pipe work clearance holes. Suitable for drilling masonry, bri more→ck/block work and stone.

Sealey Worksafe Ø5.5 x 110mm SDS Plus

from £1.49 up to £2.85

Compare prices₆→

• Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills more→are fully hardened and ground.• Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground. • Model No. SDS5.5X110Technical Specification:Size: ø5.5 x 110mmWeight: 0.039KgWarranty: Consumable

Sealey Worksafe Straight Shank Rotary Impact Ø4 x 85mm

from £1.07 up to £1.49

Compare prices₇→

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Packed in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. more→For use in a 1/2" chuck with percussion. Packed in a plastic wallet.Technical Specification:Size: ø4 x 85mmDimensions: Length: 5mm x Height: 190mmWeight: 0.012KgWarranty: Consumable

Sirius Professional HSS Jobber 4mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull HSS Jobber Imperial 9/32 FAIJ932

from £1.49

Compare prices₃→

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in more→hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.9/32in.Additional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.

Sirius Professional HSS Jobber 2mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull HSS Jobber 3mm 61mm Pack of 2 FAIPP300

from £1.49

Compare prices₃→

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size. 3.00 mm Dia. Pack of 2Additional Information:• Tip Diameter: 3.0mm• Working Length: 33mm• Overall Length: 61mm• Pack Qty.: 2

Bosch HSS-G 4.5mm Pack of 1 2608585920

from £1.49 up to £1.69

Compare prices₆→

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Sirius Professional HSS Jobber 2.8mm

from £1.49

Compare prices₃→

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

24 more item(s)