150 mm cutting discs

Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 150 mm / Disc Thickness 2.4 mm / Bore 22.23 mm

Bahco 3940 Series Metal Reciprocating Blades are made from virtually unbreakable, bi-metal Sandflex®. Shaped for fast and aggressive straight cuts but still flexible for narrow cutting. With a slope-shaped nose for various types of cuts in more demanding applications. Heavy Standard (HST) blades have precision ground teeth. The wider body makes it more rigid and has a higher resistance to fracturing and bending, allowing straighter cuts. Standard (ST) blades have coarse precision ground teeth are a series of flexible blades. The standard body makes it more flexible and easier to bend into position.Pack of 5 Bahco 3940-150-14-HST Heavy Metal Reciprocating Blade 150mm 14 TPIAdditional Information:• …

Bahco 3940 Series Metal Reciprocating Blades are made from virtually unbreakable, bi-metal Sandflex®. Shaped for fast and aggressive straight cuts but still flexible for narrow cutting. With a slope-shaped nose for various types of cuts in more demanding applications. Heavy Standard (HST) blades have precision ground teeth. The wider body makes it more rigid and has a higher resistance to fracturing and bending, allowing straighter cuts. Standard (ST) blades have coarse precision ground teeth are a series of flexible blades. The standard body makes it more flexible and easier to bend into position.Pack of 5 Bahco 3940-150-18-HST Heavy Metal Reciprocating Blades 150mm 18 TPIAdditional Information:• …

Reciprocating saw blades for wood and metal.

The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade's expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth count, the blade delivers clean cuts, whereas a low number of teeth …

Looking for a top quality cutting disc? Look no further than the BOSCH DIA-TS Diamond Disk 150x22.23 mm Silver! Electric tools have never been easier to use thanks to this sturdy and durable cutting disc, which is designed to make cutting through tough material a breeze. The diamond coating ensures that the disc maintains its sharp edge, so you can always get the job done with ease. This high quality cutting disc is perfect for professionals and DIY enthusiasts alike, so why wait? Invest in the BOSCH DIA-TS Diamond Disk today and get the job done right!

Features:Carbide teeth for precision and durability:- Alternate Top Bevel (ATB) tooth geometry for fine cuts.- Expansion slots for low vibration as well as noise and heat reduction.- Fits standard circular saws from most brands.Specifications:- Blade diameter mm: 150- Bore mm / Bore with reduction ring: 20/16- Cutting width mm: 2.5- Number of teeth: 36

Features: - Carbide Teeth For Durability.- Flat Tooth (Ft) Geometry For Clean And Precise Cuts In Various Materials.- Expansion Slots For Low Vibration As Well As Noise And Heat Reduction.- Fits Standard Circular Saws From Most Brands.Specifications:- Blade Diameter Mm: 150- Bore Mm / Bore With Reduction Ring: 20/16- Cutting Width Mm: 2.2- Number Of Teeth: 42

Cutting thick metal such as steel profiles or heavy cast iron pipes is probably not the favourite part of your job. Plumbers, renovators and demolition workers alike know that this is a tough task which, even with a powerful recip saw, requires sweat and muscle. The EXPERT 'Thick Tough Metal' not only cuts thick metal, it offers exceptional lifespan in the toughest of applications.With the Bosch EXPERT 'Thick Tough Metal' Reciprocating Saw Blade, you might just start to enjoy cutting thick steel and cast iron.Features:- Long Life Cutting Thick Tough Metal- Exceptional durability is built in with Bosch Carbide Technology.- Wide body for precise, straight cuts.- Fits all S-shank reciprocating …

A Bosch carbide blade with reinforced teeth, of course! Sometimes, the abuse endured by a blade in demolition jobs is so great that the teeth get torn off. So Bosch made them even stronger. When you absolutely have to demolish the most robust structures and fittings, the Bosch EXPERT 'Wood with Metal Demolition' Reciprocating Saw Blade is your go-to blade. It will take any abuse you inflict and keep on cutting.Features:- Long Life Cutting Metal Embedded Wood- Exceptional durability is built in with Bosch Carbide Technology.- Progressive tooth pitch to cut material of every thickness.- Fits all S-shank reciprocating saws.- Reinforced teeth withstand the extreme abuse of demolition work.- Tapered …

In Vehicle Rescue, Getting Into A Car Fast Can Be A Matter Of Life And Death. Emergency Services Are Increasingly Using Reciprocating Saws As A Valuable Rescue Tool, But They Require A Seriously Good Blade That Can Reliably Cut Through Modern Automotive Steel. The Expert 'Vehicle Rescue' Is Designed For This Crucial Task.Built With Bosch Carbide Technology, The Bosch Expert 'Vehicle Rescue' Reciprocating Saw Blade Cuts Modern Vehicles Fast And Reliably – And Helps You Save Lives.Features:- Long Life Cutting Modern Automotive Steel- Exceptional Durability Is Built In With Bosch Carbide Technology.- First Tooth Designed To Allow Plunge Cut.- Fits All S-Shank Reciprocating Saws.Long Life Cutting Mo…

Cutting out windows for replacement or during demolition was a tough job when it involved sawing multiple window materials such as steel-reinforced wood or plastic. Since window fixing screws started using high-tensile engineering steel, the old Bi-Metal blades don't get through a single screw.By combining longevity, efficiency and the sheer ability to get any window or door demolition job done, the Bosch EXPERT 'Window Demolition' Reciprocating Saw Blade is a firm favourite with window fitters. It even withstands contact with masonry, mortar and plaster.Features:- Long Life Cutting Window Stocks of any Material- Exceptional durability is built in with Bosch Carbide Technology.- First tooth …

It is compatible with angle grinders. The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additionally, the disc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. Pack of 1 • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles • High-quality standards ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 150 Bore …

Lasts up to 50x longer than a Bi-Metal blade in tough materialThe sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbers, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential.The Expert ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind.The Bosch Expert ‘Fiber Plaster’ Reciproc…

Features:Powerful Cuts In A Wide Range Of Materials:- Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slots lower vibration during use, which dampens noise and reduces heat development- HLTCG (High-Low Triple Chip Ground) teeth make the blade robust for working with abrasive materials- The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials.- It is compatible with hand-held saws.Specifications:- Outer diameter mm: 150- Bore size mm: 20- Bore with reduction ring mm: 16- Width of cut (…

The Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards that are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of stones. Pack of 1 • Reliable Cuts in All Types of Stone • Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone • Optimised diamond matrix delivers solid results • High-quality standards are ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 150 Bore diameter mm: 22.23 Cutting width mm: 2,0 Segment height mm: 10 …

The Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards, which are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of abrasive materials. • Reliable Cuts in All Sorts of Abrasive Materials • Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials • Optimised diamond matrix delivers solid results • High-quality standards ensured by Bosch´s diamond competence centre in Switzerland Specifications: Diameter mm: 150 Bore diameter mm: 22.2…

The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction components, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. Pack of 1 • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials • Diamond matrix is engineered for cutting various construction components and well-formed cutting edges Specifications: …

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, aluminium and non-ferrous metals. Specifications • Diameter: 150 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

The DEWALT FlexVolt XR Metal Reciprocating Blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. They have been optimised to deliver the best cutting performance in metal rebar and similar metals. Designed to be used in conjunction with the FlexVolt 54 Volt Reciprocating Saw. The DEWALT DT99552 FlexVolt XR Metal Reciprocating Blades have the following specification Length 152mm. TPI 14/18. Pack Size 5.

Pack of five BIM reciprocating saw blades manufactured to a high quality with progressive tooth pitch. For fast straight cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection. These blades are similar to Bosch S123XF blades.

Pack of five BIM reciprocating saw blades manufactured to a high quality. For flexible cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.