Welding Helmets

Replacement inside PC Lens for use with Fixed Shade Auto-Darkening Welding Helmet Stock No. 02517. Lens size - H 103.8 x W 47.3 x D 1mmSpecification:Lens size: H 103.8 x W 47.3 x D 1mm

Accessory Part Fits Speedglas 9000 Series Helmets Welding Safety 06-0400-51/37179(AAD)

Colour: multi-coloured Package dimensions: 15 x 10 x 5 cm Gasket shaft seal for speed glass Quality product

Suitable for 9100 in sizes V, X and XX. Outer replacement lens for your 3M Speedglas 9100, 9100FX or 9100FX Air. Typical change interval: weekly. Please note: Always replace when the lens has deep scars or scratches or when it is no longer cleaned with a soft cloth or lens paper.

Replacement Headgear suitable for ESAB Sentinel A50 Welding Helmet

The Bollé Volt Welding Helmet is suitable for welding MIG / MAG TIG and grinding. It is fitted with a variable shade filter (4/9-13) and two independent sensors with a 0.10 millisecond reaction time for optimal safety. For comfort the helmet features an adjustable 5 position headband. Conforms to EN 166/175/379 1BT.PTDBOLVOLTV

2 x spare welding lenses (Shade 11) for Draper Stock Nos 76713 and 76714 welding helmets.PTDDRPDIR35266

Replacement lithium-ion battery for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518). Contents:1 x Battery for use with Welding Helmet - Stock No. 02518Replacement battery for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518)SpecificationType: Lithium, rechargeableVoltage: 12VCapacity: 4,300mAhOperating time (on full charge): 8hCharging time (from flat): 2.5hCharging cycles: >500Dimensions: W 87 x H 63 x D 43mm

Passive welding filter kit for 3M Speedglas Welding Helmet Series 100 (Shade 11). Alternative lens shades 10 - 13 available as spare parts. Spare part, when you already have a welding helmet 100 (must be ordered separately) Appropriate for long, continuous welds and use in wet environments

This auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to 9-13 shade level. The dark shade sensitivity and delay time are adjustable using control knobs. The helmet is powered by a solar cell and a lithium-ion battery (replaceable). The 92.5 x 42.5mm viewing area provides good visibility of the weld zone. It is suitable for TIG MIG and arc welding plasma cutting and also grinding. The comfortable headband is adjustable using the knob to enable an optimal fit.PTDDRPDIR02514

Features: 100% brand high quality *Name: Automatic dimming welding helmes *Automatic light protection glasses, using automatic light film, light and convenient *Solar lithium battery, no need to replace the battery, automatic standby, no power off *Anti-glare, anti-splash *Scope of application: welding, cutting Specifications: *Model: 713311 *Mask material: PA / PP plastic *Effective observation area: 90*30mm(Approx) *Glossy: DIN4 *Dark side: DIN11 *Switching time: 1 / 10000s *Delay time: 0.2 seconds *Working temperature: -10degree Celsius~65degree Celsius *Sensor welding arc: 2 *Size: 150*64*12mm(Approx) *Protection level: DIN15 Package Contents: 1*Welding goggles 1*Elastic band

Sale Unit: CASE (EACH x 2) Brand: 3M Trade Name: Speedglas 3M Number: 07-0680-00 Series: 100

Replacement (amber) front cover lens for the ESAB Sentinel Welding Helmet. Pack 3

Suitable for 9100 V, X and XX Swap attachment discs inside for your 3M SPEEDGLAS 9100, 9100FX or 9100FX AIR Typical change interval: monthly Note: Clean regularly with a soft cloth and replace if the surface is grained or scratches are present

Starter Kit for 9100X ADF 2.10" x 4.20" ADF Viewing Area Personal Protective Equipment International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This welding headshield features a fixed shade and provides a tough hard wearing design. Suitable for MIG and TIG welding.