Drill Bits

• Also fits; Makita - HM0810/8035NB, HM0810T, HM1200, HR3500/HR3510/HR3520, Atlas Copco - PH5F, Hitachi - DH28Y, DH38YBI, DH42.• Length: 450mm.Also fits; Makita - HM0810/8035NB, HM0810T, HM1200, HR3500/HR3510/HR3520, Atlas Copco - PH5F, Hitachi - DH28Y, DH38YBI, DH42.Technical Specification:Length: 450mmWidth: 20mmDimensions: Length: 20mm x Height: 525mmWeight: 0.776KgWarranty: Consumable

Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

Bosch 2608900582 Expert HEX-9 Multi Construction Drill Bit 10mm x 150mmThe Bosch 2608900582 Expert HEX-9 drill bit has an 8mm diameter and 100mm overall length. It is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 1/4" shank provides optimum power output whilst the carbide centering tip ensures a precise start-up and good control. This model is extremely durable thanks to its diamond ground-cutting edges.Features:
- Suitable for drilling practically all materials including concrete, brick, wood, plastic, thin sheet metals, ceramic and tile
- 1/4" hex shank for optimum power transfer
- The carbide centering tip ensures a precise start up …

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. With a diameter of 11mm and a length of 142mm, this drill bit excels in drilling through various metals, including steel and aluminium. Its design ensures clean and accurate holes, making it an indispensable addition to your toolkit for metal fabrication, construction, and other demanding applications. The 11mm diameter provides the strength and precision …

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 9mm • Total Length: …

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 200mm Diameter: 10mm Flute Length: 126mmAdditional Information:• …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Up to 3x faster than a standard drill bitSpade bits are a great accessory for electricians and other installation and building workers. What if they could be even faster and more efficient? With Bosch Tip Technology, they can.The Expert SelfCut Speed features the most advanced designs for spade bits, making it easy to use and highly practical for heavy professional users. Its Bosch patent threaded tip draws the spade bit into wood with only the lightest pressure from the user, which is especially helpful when drilling upside down or in tight niches. Its advanced paddle design ensures extra speed.Equally at home in softwoods, chipboard or particleboard, the Bosch Expert SelfCut Speed Spade Bit …

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Irwin Speedhammer Flat Chisels for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The Irwin IRW10502187 Speedhammer Max flat chisel has the following dimensions:Size: 25 x 280mmAdditional Information:• Type: Flat Chisel• Size: 280mm

The CWC TCT series pilot pins are compatible with rotabroach TCT cutters from a 18mm to 52mm diameter and 35mm depth of cut.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø13 x 600mmDimensions: Length: 12mm x Height: 680mmWeight: 0.306KgWarranty: Consumable

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-38 Flat Bit 38mmAdditional Information:• Diameter: 38mm• Overall Length: 160mm• Pack Qty.: 1

Bosch 2608587163 CYL-9 Ceramic Tile Drill Bit 7mm The Bosch 2608587163 drill bits are suitable for drilling through soft-to-medium hard tiles thanks to their simple flute-less design. They are compatible with both corded or cordless non-impact drills with a cylindrical shank system, and allow for dry drilling without lubrication. This makes working effortless and convenient for optimum productivity. In addition to this, they are extremely durable and long lasting. Features:
- Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient
- Simple flute-less design makes these bits suitable for drilling through soft-to-medium hard tiles
- The …