Drill Bits

The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bits reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …

• HSS Cobalt drill bit set.• 135° Split point self-centring tip makes for easier penetration.• 5% Cobalt helps to increase life of drill bit.• Suitable for drilling high carbon steel and stainless steel.• Contents ø1.5 (x16), 2 (x16), 2.5 (x15), 3 (x10), 3.2 (x10), 3.5 (x8), 4 (x8), 4.5 (x3), 5 (x3), 5.5 (x2), 6 (x2), 6.5 (x2), 8 (x2), 10mm (x2).• Supplied in a metal storage case.HSS Cobalt drill bit set. 135° Split point self-centring tip makes for easier penetration. 5% Cobalt helps to increase life of drill bit. Suitable for drilling high carbon steel and stainless steel. Supplied in a metal storage case.• HSS Cobalt drill bit set. • 135° Split point self-centring tip makes for ea…

• No-Load Speed: 4200rpm.• Fast, simple and effective way to sharpen your drill bits.• Gives a perfect angle/sharpened head to make drilling with your bit easier.• Suitable for up to 118° HSS Titanium, Cobalt, Carbon Steel and Split Point bits in range ø3-13mm.Fast, simple and effective way to sharpen your drill bits. Gives a perfect angle/sharpened head to make drilling with your bit easier. Suitable for use with HSS Titanium, Cobalt and Carbon Steel bits in range ø3-13mm.• No-Load Speed: 4200rpm. • Fast, simple and effective way to sharpen your drill bits. • Gives a perfect angle/sharpened head to make drilling with your bit easier. • Suitable for up to 118° HSS Titanium, Co…

The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank 6.3mm (1/4in). Contains 1 x Straight 5.0 x 12mm. 1 x Straight 6.0 x 20mm. 1 x Straight 8.0 x 20mm. 1 x Straight 10.0 x 20mm. 1 x Straight 12.0 x 20mm. 1 x Straight 14.0 x 20mm. 1 x Straight 16.0 x 20mm. 1 x Straight 18.0 x 20mm. 1 x Straight 20.0 x 20mm. 1 x Dovetail 12.7 x 13mm. 1 x 90 V-Groove 9.5 x 9mm. 1 x 90 V-Groove 12.7 x 9mm. 1 x Core Box R3.2mm, 6.0 x 6mm. 1 x Core …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Diamond Wet Drill Bit delivers long life when drilling hard ceramics. Its high-class diamond coating makes the bit very robust and wear-resistant, allowing for extended usage. The product is intended for a variety of materials from soft wall tiles to very hard floor tiles such as fine stoneware. This robust and compact set features a transparent storage box providing a good overview of its contents as well as safe storage and transport. Do not drill in impact mode. Use water cooling when operating drills with this product. It is suitable for use with cordless drills. 4-piece Robust Line diamond wet drill bit set • Long Life for Hard Ceramics • Diamond Wet Drill Bit delivers long …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

DeWalt raises the bar still further with a superior range of SDS MAX drill bits. For use with SDS MAX drive hammer drills (Hilti type F, G, or Y) for anchor, fixing or clearance holes in masonry, concrete, brick, or block work. Features & Benefits • Drill bit tip delivers effective drilling / breaking longer. • Drill bit tip maintains its effective drilling / breaking edges longer. • 4 cutter tip enables a more circular hole to be drilled • Debris is removed more efficiently from the hole allowing impacts to perform more effectively Specifications • Diameter: 20mm • Length: 920mm • Working Length: 800mm

DeWalt raises the bar still further with a superior range of SDS MAX drill bits. For use with SDS MAX drive hammer drills (Hilti type F, G, or Y) for anchor, fixing or clearance holes in masonry, concrete, brick, or block work. Features & Benefits • Drill bit tip delivers effective drilling / breaking longer. • Drill bit tip maintains its effective drilling / breaking edges longer. • 4 cutter tip enables a more circular hole to be drilled • Debris is removed more efficiently from the hole allowing impacts to perform more effectively Specifications • Diameter: 26mm • Length: 540mm • Working Length: 400mm

Length: 165mm, Fitment: " BSP Female

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications: Cutting depth: 25 mm Bore Ø: 57 mm

• HSS Nova 25 core bit with QuickIN holder• Industrial standard. Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 40 mm

• HSS Nova 25 core bit with QuickIN holder• Industrial standard. Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 41 mm

• TCT Ultra 50 core bit with 3/4 in Weldon holder• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 55 mm

18-piece wood twist drill bit and bit set. High quality, metal twist drill bits for precise, splinter-free drilling in soft wood, hard wood and laminated panel material. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. Very good concentricity. The hexagonal shaft ensures very good power transfer. The Rapidaptor universal holder ensures rapid bit change without any extra tools. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits: • Ideal for mobile repair and assembly work • Rapidaptor holder for rapid bit change • 1/4" drive suitable for power screwdrivers • Rapidaptor u…

The Osborn HSS Co8 M42 Long Series Cobalt Drill Bit is great for drilling deep holes in stainless steels and difficult to cut materials such as titanium and inconel. Specifications • Diameter: 11.8mm • Working Length: 128mm • Total Length: 195mm

The Osborn HSS Co8 M42 Long Series Cobalt Drill Bit is great for drilling deep holes in stainless steels and difficult to cut materials such as titanium and inconel. Specifications •Diameter: 12mm •Working Length: 134mm •Total Length: 205mm

Engineered to tackle tough materials, the Rotabroach hole cutter ensures smooth, accurate cuts through steel, stainless steel, and other hard metals. The carbide tips maintain sharpness longer than traditional cutters, providing consistent, reliable performance and reducing the need for frequent replacements. The cutter's advanced design minimises vibration and reduces operator fatigue, ensuring a more comfortable and efficient cutting experience. Its robust construction and superior materials ensure longevity and optimal performance, even in demanding conditions. Features & Benefits • Ideal for construction steel, stainless steel, high strength steel • Tungsten carbide tips harder …

The Rotabroach M42 series employs a unique and exclusive geometry that you will only find on genuine Rotabroach cutters. This unique design ensures that the cutter will last longer, cut faster and give a better and more accurate finished hole. Rotabroach M42 cutters are manufactured from high speed steel with 8% cobalt. The cobalt allows the material to absorb more heat and makes it stronger and less prone to chipping. Designed for low grade rail. Specifications • Max. Tensile Strength: < 1100N/mm² • Ideal For: Mild & Structural Steel & Rail Track • Diameter: 29mm • Length: 50mm

Rotabroach Raptor cutters have a unique geometry designed to offer fast cutting, long life, and dependable accuracy and finish. Features & Benefits • Raptor cutters have a unique and exclusive geometry that you will only find on genuine Rotabroach cutters • Manufactured from M2AL material. Heat treated to a higher temperature, for greater hardness • Designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter Specifications • Diameter: 46mm • Length: 25mm • Max. Tensile Strength: < 900N/mm² • Ideal For: Mild & Structural Steel • 19mm / 3/4" Weldon Shank