Drill Bits

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. Features & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20602-QZ • Diameter: 3mm • Quantity: 2

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

• Sharpening disc for Model No. SMS2001M Drill Bit Sharpener.Sharpening disc for Model No. SMS2001M Drill Bit Sharpener.• Sharpening disc for Model No. SMS2001M Drill Bit Sharpener. • Model No. SMS2001M.10Technical Specification:Application(s): SMS2001MNett Weight: 0.05kgDimensions: Length: 60mm x Height: 20mmWeight: 0.046KgWarranty: Consumable

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 6mm • Length: 100mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-20 Flat Bit 20mmAdditional Information:• Diameter: 20mm• Overall Length: 152mm• Pack Qty.: 1

Bosch 2608587580 SelfCut Flat Drill Bit with Hex Shank 25mm x 152mm The Bosch 2608587580 Flat Wood drill bits are designed for drilling soft and hardwood as well as light building materials such as plasterboard. They are manufactured from specially hardened steel with precision ground tips and cutting edges for dimensionally accurate holes and are capable of drilling up to 5x faster than standard spade drill bits. Features:
- Drill up to 5 times faster than standard spade drills
- Flat Wood drill bits suitable for Hard Wood, Soft Wood, Plasterboard/Drywall
- Innovative self-feeding threaded tip for fast and accurate drilling with little exertion of force
- The precision-ground tip and …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

Replacement drill bit. Specifications: • Dia Metric: 2.38 • Dia Imperial: 3/32 • Overall Length Metric: 58 • Type or Grade: No.6

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP200LS Pre Pack HSS Jobber Drills Long Series 2.0mm have the following specifications:Diameter: 2.0mm. Overall Length: 85mm. Pack quantity: 2.Additional Information:• …

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills per card (sizes 1.6-3.3mm).

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. The Draper Expert range is our benchmark for quality. Manufactured for the professional or for industrial use Specifications High Speed Steel Manufactured to ISO 235/1 Specifications

The Milwaukee Metric HSS-G THUNDERWEB Metal Drill Bit design is unique, with a conical shaped web which gets thicker towards the back of the drill bit. It has a parabolic web cross section that gives a larger web thickness, increasing the strength of the bit and prevents breakage. The THUNDERWEB flute form ejects hot chips rapidly, dissipating heat better, increasing the life span and working time. The open flute form also reduces drill drawback, especially when drilling deeper holes. The 135 split point allows for precision starting, quick penetration, and requires less effort and feed pressure, and is perfect for drilling very hard materials. They are also great for drilling on curved surfaces.…

Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 peaks that offer several distinct competitive advantages - Super-accurate self-centring - you can make a hole in a round-pipe with one hand. - Speed - twice as fast as split point drill bits. - Tool lifetime - up to 10 times longer life in mild steel. Manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance. The cutting performance is fantastic, both on precision and degree of finish, leaving much less defects (burr) than other drill bits. Its protruding centre …

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. The Draper Expert range is our benchmark for quality. Manufactured for the professional or for industrial use Specifications High Speed Steel Manufactured to ISO 235/1 Specifications

Provides cleaner, more accurate holes. Unique Carbide Grade - maximises durability. Innovative tip design - efficient drilling action. Optimised milled flute for fast drilling. Special copper brazing to withstand high temperatures. Item Weight: 9g. The Dewalt innovative Extreme masonry bit offers excellent quality for all types of masonry work. The drill bits last up to twice as long and delivers up to 50% more holes per charge than a standard masonry bit providing cleaner, more accurate holes for improved fixing. The drill bits feature the following: Unique Carbide Grade - optimum grade maximises durability. Innovative Tip Design - unique design provides an efficient drilling action and reduced …

The Milwaukee Metric HSS-G THUNDERWEB Metal Drill Bit design is unique, with a conical shaped web which gets thicker towards the back of the drill bit. It has a parabolic web cross section that gives a larger web thickness, increasing the strength of the bit and prevents breakage. The THUNDERWEB flute form ejects hot chips rapidly, dissipating heat better, increasing the life span and working time. The open flute form also reduces drill drawback, especially when drilling deeper holes. The 135 split point allows for precision starting, quick penetration, and requires less effort and feed pressure, and is perfect for drilling very hard materials. They are also great for drilling on curved surfaces.…

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Impact grade power tool bits for the professional user.• Forged from high quality S2 steel.• Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load.• Torsion bits absorb impact and transfer maximum torque to the fixing.• Lifetime guarantee*.Impact grade power tool bits for the professional user. Forged from high quality S2 steel. Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load. Torsion bits absorb impact and transfer maximum torque to the fixing.Technical Specification:Length: 25mmNett Weight: 0.020kgPack Qty: 3pcsTyp…

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Impact grade power tool bits for the professional user.• Forged from high quality S2 steel.• Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load.• Torsion bits absorb impact and transfer maximum torque to the fixing.• Lifetime guarantee*.Impact grade power tool bits for the professional user. Forged from high quality S2 steel. Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load. Torsion bits absorb impact and transfer maximum torque to the fixing.Technical Specification:Length: 25mmNett Weight: 0.020kgPack Qty: 3pcsTyp…