Drill Bits

Dewalt DT4768 Extreme Impact Flatwood Drill Bit 20mm x 152mmThe Dewalt DT4768 has a 20mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling.Features:
- Ideal for door locks, electrical and plumbing workSpecification:
- Cutting Diameter: 20mm 
- Length: 152mm
- Pack Quantity: 1

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 11mm • Length: 160mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

Make an Impact with The Dewalt DT4769 Extreme Impact Flatwood Drill Bit The Dewalt DT4769 has a 22mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and chamfered outer cutting spurs for razor-sharp, clean precise drilling.Features:
- Ideal for door locks, electrical and plumbing workSpecification:
- Length: 152mm
- Pack Quantity: 1
- Cutting Diameter: 22mm 

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

• Tungsten carbide tipped with optimized geometry for drilling concrete and stone • Vacuum brazed tips for durability • Ground flutes designed for optimum debris removal • SDS-plus shank • Diameter: 6,5 mm • Working length: 90 mm • Total length: 160 mm Specifications: Diameter = 6.5mm Working length = 90mm Overall length = 160mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. Features & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20610-QZ • Diameter: 7mm • Quantity: 1

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 6mm • Length: 200mm • Pack Quantity: 1Features & Benefits• For use with Concrete,…

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 5.5mm • Total Length: …

The CYL-5 Drill Bit guarantees extra-long durability when drilling concrete and stone. The combination of a carbide blend developed in-house by Bosch and diamond-ground cutting edges makes the bit extremely wear-resistant. Friction on the flute from drilled material is notably reduced thanks to a 2-flute vario design with a short, variable incline providing good dust removal and wear reduction. The Bosch Power Grip Shank System enables 100% power transfer from machine to drill bit. This allows a direct use of power for drilling with no power loss and thus less wear. For use when drilling holes for fixings in concrete, natural and artificial stone. As proof of quality, the drill bit bears the …

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank. Features & Benefits: • Expert Quality • Precision ground central point and new style cutting edge spurs • Ideal for use with combi drills, drill drivers and impact drivers • Made from high quality carbon steel that's correctly hardened and tempered …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 5.0mm • Overall Length: 116mm • Working Length: 52mm • Quantity: 1

These DeWalt drill bits have a carbide split-point tip and aggressive flute angles, they deliver the power to easily drill through a range of materials without the need to change bits. A no spin shank helps to increase efficiency by eliminating bit slippage. Features & Benefits • Suitable for wood, plastics, mild steel and non-ferrous metals and masonry • CrNiMo steel for optimal power transmission and breakage stability • Anti-slip shank with 3 milled clamping surfaces prevent rotation of the drill bit in the chuck Specifications • Head Type: Carbide Grit • Diameter: 10mm • Product Length: 200mm • Shank/Connection: Round

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 6.5mm • Drill Length: 101mm • He…

Ideal for general purpose drilling into most masonry products. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.

Drills for professional use. Tungsten carbide tip for strength and durability. Fits to all machines with SDSplus or Hilti-chucks. For use in concrete, brick and masonry. Specially designed flutes for fast efficient dust removal. TMS treatment provides stress relief for superior strength.

This Milwaukee HSS-G THUNDERWEB Metal Drill Bit has the following specification: Diameter: 4.0mmWorking Length: 43mmOverall Length: 75mmPack Size: 2 Note: Image is for illustrative purposes only and may differ from the actual product

Irwin Turbomax HSS Drill Bit (2). Size 5.0 x 86mm. Note: Image is for illustrative purposes only and may differ from the actual product

Designed for fast and efficient drilling in brickwork, concrete and breeze block. Drills up to 60% faster than competitive drill bits and still with the same high durability. Unique, pressed carbide tips for aggressive cutting. Drill speed up to 60percent faster than competitive drill bits whilst maintaining the same high durability. Single flute design. Pressed diamond-ground carbide tip. Unique carbide tip design. Chrome vanadium body. High durability.

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …