Drill Bits

Sirius Professional HSS Jobber Imperial 3/16" Pack of 1

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combi more→nation of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 4.2mm • Total Length: …

from £2.49

IRWIN Turbomax HSS 6.0mm OL93mm WL48mm IRW10502221

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

from £2.49 up to £3.49

Faithfull Cold Chisel 200 x 13mm FAI812 (8 x 1/2in)

The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of more→wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used. Irwin Turbomax HSS Drill Bit (2). Size 6.0 x 93mm. Working Length 48mm

from £2.49 up to £4.29

Faithfull SDS Plus 5mm OL 110mm WL 50mm FAISDS5110

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. more→The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

from £2.49 up to £2.54

Faithfull Flat Bit 19mm FAIFB19E

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilli more→ng, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

from £2.49 up to £3.59

Draper Flat Wood Bit, 6mm

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutt more→ing MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

from £2.49 up to £2.55

Dormer A100 HSS Jobber Number Size N58 Pack of 1 A100N58P1

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

from £2.49

Draper Flat Wood Bit, 19.0mm

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld more→power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

from £2.49 up to £2.96

Faithfull Professional HSS Jobber 3.3mm 65mm Pack of 2 FAIPP330P

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

from £2.49

IRWIN Masonry 5.5 x 160mm

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fu more→lly ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP330PRO Professional Jobber Drill Bits have the following specifications: Diameter: 3.3mm. Pack quantity: 2.Additional Information:• Tip Diameter: 3.3mm• Working Length: 35mm• Overall Length: 65mm• Pack Qty.: 2

from £2.49 up to £3.69

Compare prices₆→

Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 5.5mm.Total length: 160mm.Working Length: 115mm.

Sirius Professional HSS Jobber 1.15mm

from £2.49

Bosch UNEO SDS Quick Masonary 4mm 85mm Pack of 1 2609256900

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

from £2.49

Sealey Worksafe Auger Wood Drill Ø10 x 235mm

Concrete drill bit with SDS quick shank Specifications: Diameter mm: 4,0 Working length mm: 40 Total length mm: 85 Materials: Concrete Stone Materials in Detail: Concrete Natural stone Masonry Rein more→forced concrete

from £2.49 up to £3.87

Compare prices₇→

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in more→a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø10 x 235mmDimensions: Length: 12mm x Height: 330mmWeight: 0.096KgWarranty: Consumable

Faithfull HSS Jobber 9.5mm 125mm Pack of 1 FAIPP950

from £2.49

Sealey Worksafe SDS Plus Ø6.5 x 260mm

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, more→iron and most metals. Manufactured to meet DIN 338 standard.Size.9.50 mm Dia.Additional Information:• Tip Diameter: 9.5mm• Working Length: 81mm• Overall Length: 125mm• Pack Qty.: 1

from £2.30 up to £2.66

Compare prices₆→

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills a more→re fully hardened and ground.Technical Specification:Size: ø6.5 x 260mmDimensions: Length: 10mm x Height: 320mmWeight: 0.062KgWarranty: Consumable

Stanley Masonry 10mm 120mm Pack of 1 STA53120

from £2.49

Sirius Professional HSS Jobber 5.2mm

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel constr more→uction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

from £2.49

Sirius Professional HSS Jobber 0.5mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

from £2.49

Faithfull Lip and Spur Wood 8mm FAIWDB80

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

from £2.49

Draper Flat Wood Bit, 14mm

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 8mm.Working Length: 75mm.Overall Length: 120mm.Additional Information:• Diameter: 8mm• Overall Length: 120mm• Working Length: 75mm• Pack Qty.: 1

from £2.49 up to £2.68

CK Tools C.K Masonry 6.5x100mm

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

from £2.13 up to £2.49

Dormer A100 HSS Jobber Number Size N63 Pack of 1 A100N63P1

Masonry Drill Bit 6.5x100mmC.K Masonry Drill Bit 6.5x100mm~ Forged steel with tungsten carbide tip~ Optimised design for fast and accurate drilling of concrete, stone & brick~ Diameter: 6,5 mm~ Total more→length: 100 mmTechnical DataDiameter: 6.5mmOverall length: 100mmComponent Material:Tungsten tip, Forged Steel Technical Specification:CE Certified: NoConflict Materials Content : yesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety …

from £2.49