Drill Bits

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.11.00mm.Additional Information:• Tip Diameter: 11.0mm• Working Length: 90mm• Overall Length: 140mm• Pack Qty.: 1

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …

Bosch 2608597678 CYL-3 Concrete Drill Bit 5.5 x 90 x 150mm The Bosch 2608597678 drill bit is designed for drilling holes in concrete, masonry and brick materials. You can expect high wear resistance thanks to its durable carbide blend and effective 2-flute U-shape design which provides good dust removal, reducing friction and extending the lifetime. Features:
- CYL-3 Drill Bits provide lasting performance when drilling in concrete
- High wear resistance from a durable carbide blend developed and manufactured by Bosch
- Effective 2-flute U-shape design provides good dust removal, reducing friction and extending the lifetime
- Lasting performance when drilling holes for fixings in abrasive …

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 4mm • Length: 90mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood with minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Milwaukee Contractor series SDS Plus drill bit. Specifications • Shank: SDS Plus • Diameter: 14mm • Length: 160mm

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-14 Flat Bit 14mm

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 9.00 mm Dia.Additional Information:• Tip Diameter: 9.0mm• Working Length: 81mm• Overall Length: 125mm• Pack Qty.: 1

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Extremely robust: the manufacture of solid metal leads to an extremely robust body of the Impact Control HSS spiral drill bit.
High durability: Precision ground spiral groove for reduced wear when drilling. The use of e.g. oil as a coolant, also extends the life of the spiral drill
Precise work: active cutting with low contact force and perfect centering thanks to split-point drill bit.
Areas of application: suitable for use in alloy and non-alloy steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Compatibility: Suitable for all hammer drills, drills and drill stands with hexagonal shank

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

A brad point drill bit has a centering tip for fast and accurate drilling. They give clean and precise holes when drilling through wood and wood-based materials. Features & Benefits • Centering tip for accurate starting • Chrome- vanadium alloyed steel for strength and durability • Round shank for use with standard corded and cordless drills • Suitable for general purpose use in soft or hard woods, laminates and chipboard Specifications • Diameter: 6mm • Length: 100mm

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5.5 mm x 150 mm.Additional Information:• Diameter: 5.5mm• Overall Length: 150mm• Pack Qty.: 1

These DeWalt drill bits have a carbide split-point tip and aggressive flute angles, they deliver the power to easily drill through a range of materials without the need to change bits. A no spin shank helps to increase efficiency by eliminating bit slippage. Features & Benefits • Suitable for wood, plastics, mild steel and non-ferrous metals and masonry • CrNiMo steel for optimal power transmission and breakage stability • Anti-slip shank with 3 milled clamping surfaces prevent rotation of the drill bit in the chuck Specifications • Head Type: Carbide Grit • Diameter: 5mm • Product Length: 113mm • Working Length: 83mm • Shank/Connection: Round

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Faithfull Multi Construction Drill Bits are suitable for use in most materials encountered in the building industry. They can be used on brick, tile, concrete, metal, aluminium, wood and plastic, and are ideal for multi-layer materials. The diamond-ground carbide tip has advanced performance cutting edges for a long working life and the flute is designed for fast debris removal. Perfect for use in cordless drills when used on both rotary or hammer modes, dependent on the material being drilled (4mm bit rotary only).1 x Faithfull Multi Construction Drill Bit 4 x 75mmAdditional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.• 75mm: 1

Sold with 2 attachments: a silicone baby teat (6-12 months) and a fixed toddler attachment (from 12 months)
Wide neck: easy filling and cleaning
Stable base: can stand upright
Complete with two spouts
Solid base: can be stands
Sold with 2 attachments: a silicone baby teat (6-12 months), strong and toddlers (from 12 months
Wide neck: Easy Filling and Cleaning
Soft refillable pouch which is perfect for weaning baby with its first food

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.