Drill Bits

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills per card (sizes 1.6-3.3mm).

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 8mm.Working Length: 75mm.Overall Length: 120mm.Additional Information:• Diameter: 8mm• Overall Length: 120mm• Working Length: 75mm• Pack Qty.: 1

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curved surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø12 x 155mmWeight: 0.086KgWarranty: Consumable

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Concrete drill bit with SDS quick shank Specifications: Diameter mm: 4,0 Working length mm: 40 Total length mm: 85 Materials: Concrete Stone Materials in Detail: Concrete Natural stone Masonry Reinforced concrete

DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes. Suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood. For diameters 11mm and above, the shank is reduced to 9.5mm. The DEWALT DEWDT4507QZ Brad Point drillbit has the following dimensions Size 7 x 110mm

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Expert Quality, long series HSS drill bits, manufactured to DIN 340 ISO 494 specifications. Display packed.

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 2.5mm • Total Length: …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP250PRO Professional Jobber Drill Bits have the following specifications: Diameter: 2.5mm. Pack quantity: 2.Additional Information:• Tip Diameter: 2.5mm• Working Length: 27mm• Overall Length: 55mm• Pack Qty.: 2

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Faithfull Multi Construction Drill Bits are suitable for use in most materials encountered in the building industry. They can be used on brick, tile, concrete, metal, aluminium, wood and plastic, and are ideal for multi-layer materials. The diamond-ground carbide tip has advanced performance cutting edges for a long working life and the flute is designed for fast debris removal. Perfect for use in cordless drills when used on both rotary or hammer modes, dependent on the material being drilled (4mm bit rotary only).1 x Faithfull Multi Construction Drill Bit 4 x 75mmAdditional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.• 75mm: 1

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood with minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Irwin HSS Pro TiN Coated Drill Bit. Size 8.0 x 117mm. Note: Image is for illustrative purposes only and may differ from the actual product

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit