Drill Bits

Belongs in every toolbox: Masonry drilling made easy. This basic set with 7 masonry drill bits allows clean and precise drilling in masonry and stone. Covers the most common applications with drilling diameters between 3 and 8 mm.With cylindrical shank

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 3 x 38 mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick. The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris. Size 230 x 5mm (9 x 3/16in).

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…

DeWalt's Extreme series Tri-Flute bits are impact rated with 1/4" hex shanks, making them suitable for use in impact drivers as well as all standard drills with a jawed chuck. They can be used for drilling holes up to 100mm deep into wood with corded and cordless machines. Specifications • Drilling Diameter: 16mm • Total Length: 152mm Please note 13mm bit is shown for illustration purposes only.Features & Benefits• Impact rated: suitable for use with impact drivers • Quick-change 1/4" hex shanks suitable for use in a wide range of machines • Tri-flute tapered design for faster removal of wood chips with less binding • Three cutting spurs for cleaner, faster holes …

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 4.2 x 45 mm

DeWalt's Extreme series Tri-Flute bits are impact rated with 1/4" hex shanks, making them suitable for use in impact drivers as well as all standard drills with a jawed chuck. They can be used for drilling holes up to 100mm deep into wood with corded and cordless machines. Specifications • Drilling Diameter: 22mm • Total Length: 152mm Please note 13mm bit is shown for illustration purposes only.Features & Benefits• Impact rated: suitable for use with impact drivers • Quick-change 1/4" hex shanks suitable for use in a wide range of machines • Tri-flute tapered design for faster removal of wood chips with less binding • Three cutting spurs for cleaner, faster holes …

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 5mm • Length: 210mm • Working Length: 150mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

Blades manufactured from carbon steel hardened and tempered with blade guards. PVC oval handles. Display packed.

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 15mm • Length: 200mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 130mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet. • Model No. BSB16.5Technical Specification:Size: ø16.5 x 180mmDimensions: Length: 20mm x Height: 200mmWeight: 0.17KgWarranty: Consumable…

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.

These DeWalt Extreme Metal Drill Bits are suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm². Strong central core with tapered web that greatly reduces breakage and no walk tip for easy positioning on curved surfaces. Features & Benefits • Suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm² • An innovative tapered web greatly reduces breakage with a gold ferrous oxide coating preventing overheating for longer bit life • Three flat sides eliminate slipping in the chuck • Permanent size markings located above shank for increased visibility Specifications • Head Type: HSS • Diameter: 10.5mm • Working …

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø16 x 460mmDimensions: Length: 1mm x Height: 525mmWeight: 0.344KgWarranty: Consumable

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-36 Flat Bit 36mm

The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 9.5mmWorking Length: 78mmOverall Length: 125mmAdditional Information:• Tip Diameter: …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø25 x 155mmDimensions: Length: 5mm x Height: 210mmWeight: 0.2KgWarranty: Consumable

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 8.5mm • Total Length: …