Milling cutters Resanta FM-1300E 75/13/1  all diamond core bits & milling cutters →

The DeWalt four cutter countersink provides a clean, professional finish. They are ideal for drilling pilot holes and countersinking in one action and can be used on hard and soft wood, composite boar more→d and MDF. Features & Benefits • Four cutter countersink and tapered drill bit provide superior speed and ideal finish • Replacement tapered bits offered • Can be used on hard and soft wood, composite board and MDF Specifications • Accessory type: No. 10 Pilot Bit and No. 4 Countersink Cutter • Shank: 5/16"

The DeWalt four cutter countersink provides a clean, professional finish. They are ideal for drilling pilot holes and countersinking in one action and can be used on hard and soft wood, composite boar more→d and MDF. Features & Benefits • Four cutter countersink and tapered drill bit provide superior speed and ideal finish • Replacement tapered bits offered • Can be used on hard and soft wood, composite board and MDF Specifications • Accessory type: No. 8 Pilot Bit and No. 4 Countersink Cutter • Shank: 5/16"

Trend Snappy 12.7mm diameter countersink - with adjustable drill 12.7mm diameter countersink for up to 12 gauge Imperial screws. The perfect, fast swap accessory for clean, consistent finishes." more→Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters for applications where the fixings need to be hidden. Specifications • Shank Diameter: 1/4 hex • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: …

Trend Snappy 9.5mm diameter countersink - with adjustable pilot drill 9.5mm diameter countersink with pilot drill designed for Imperial No6 gauge screws in softwood. The perfect, fast swap accessor more→y for clean, consistent finishes." Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Fitted with high quality 2.5mm diameter replaceable HSS (High Speed Steel) drill Ideal for metric screws up to 5mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications …

Trend Snappy 9.5mm diameter countersink - with adjustable pilot drill 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for cl more→ean, consistent finishes." Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Fitted with high quality 2.75mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy …

Trend 35mm Hinge Sinking Cutter - 8mm shank for solid timber boards Affordable cutter for drilling 35mm diameter recesses for Euro style kitchen hinges. Tool steel cutter with cutting spurs for use more→on solid timber boards. Can be easily resharpened for long lifespan" Cutting spur design scribes the outer edge for perfect, splinter-free hinge recesses in hard and softwoods. Accurate, consistent drilling ensures quicker results when doing single jobs or batch work. Designed for pillar drill use, the 8mm diameter shank will fit smaller drills for maximum compatibility. Specifications • Shank Diameter: 8 mm • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 55

• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine.• HSS End Mill ø8mm for SM2502.One of a comprehensive range of high quality accessori more→es for Model No. SM2502 mini drilling/milling machine.• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine. • Model No. SM2502EM08Technical Specification:Description: HSS End Mill ø8mm 2 FluteNett Weight: 0.04kgDimensions: Length: 30mm x Height: 30mmWeight: 0.034KgWarranty: Consumable

Trend 35mm Hinge Sinking Cutter - 8mm shank for melamine faced boards Affordable cutter for drilling 35mm diameter recesses for Euro style kitchen hinges. TCT (Tungsten Carbide Tipped) cutting face more→s for durable, long life performance. Perfect for use on melamine faced boards with abrasive cores such as chipboard and MDF. Accurate, consistent drilling ensures quicker results when doing single jobs or batch work. Designed for pillar drill use, the 8mm diameter shank will fit smaller drills for maximum compatibility. Specifications • Shank Diameter: 8 mm • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 57 • Type or Grade: TCT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 70

• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine.• HSS End Mill ø10mm for SM2502.One of a comprehensive range of high quality accessor more→ies for Model No. SM2502 mini drilling/milling machine.• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine. • Model No. SM2502EM10Technical Specification:Description: HSS End Mill ø10mm 2 FluteNett Weight: 0.04kgDimensions: Length: 30mm x Height: 30mmWeight: 0.048KgWarranty: Consumable

Trend Craft Pro 1/4in shank straight router cutter - 5/16in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber b more→ased materials. 8mm wide X 25mm cutting depth with bottom cut feature for increased diversity including light morticing. Matched 5/16in imperial diameter, for use with matched fit to imperial dimensions for precise fitting, 1in cut depth for deeper grooving, slotting and morticing in small furniture work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.…

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 59.5

Drilling and Countersinking in One Step - The Brad Point Drill Bit with Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, all three opera more→tions are achievable at once. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multi-functional bit, made of tool steel, has a 90-degree countersink angle, five cutting edges and can also be used as a depth stop. The countersink comes with a hexagon pin key, a brad point drill bit and an arbour-mounted countersink. Cylindrical shank compatible with three-jaw drill chucks. …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 more→.3 • Dia Imperial: 1/4 • Cut Length Metric: 11 • Overall Length Metric: 44

The Halls High Speed Steel Countersink with 1/4in hexagon shank, 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 12.4mm.Angle. 90° .Additional Information: more→• Countersink Type: Countersink• Size (mm): 12.4

For Model 452 Hole Cutter
22-38mm Size
Sold in each

Type C: Ideal for grooving, edge-routing and other general purpose routing tasks. Suitable for hand-held and table mounted routers and CNC machines. Cuts hardwood, softwood, plywood and wood composite more→s A specially formulated, highly compact Titanium Cobalt Carbide (TiCo), engineered and manufactured by freud. It provides a sharper edge and flawless finish with a dramatically longer cutting life. Perma shield technology is a non-stick coating formulation that withstands the toughest applications. It provides thermal insulation, protects from corrosion and eliminates resin build-up, reducing downtime for cleaning. Specifications • Cutting Diameter (D mm): 10 • Cutting Height (h mm): …

Crafted from solid carbide, it offers exceptional hardness and wear resistance, making it suitable for milling a wide range of materials including stainless steel, cast steel, cast aluminium, and copp more→er. The TiALN (Titanium Aluminium Nitride) coating enhances the end mill's performance by reducing friction and heat, allowing for faster cutting speeds and extended tool life. The Weldon shank design provides increased stability and secure grip in tool holders, ensuring precise and efficient milling operations. Product Operations • Shallow shoulder milling • Deep shoulder milling • Plunge milling • Shallow slot milling • Ramping • Progressive Plunging Features & Benefits …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 55

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs more→in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: …

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds more→only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 4.76 • Overall Length Metric: 85

Arbors for hole cutters item 451.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden more→;word-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left} Product Code Part Number M L D Weight mm mm mm g 004510101 451GA 10X1,25 10x1,25 1214 57 8 38 004510102 451GA 12X1,25 12x1,25 1534 57 10 57 004510105 451GA 14X1,5 14x1,5 3550 57 10 56

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood over more→lay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 13 • Overall Length Metric: 57 • Bearing Dia Metric: 15.9