180 mm cutting discs

prices on 69 models

£60 180 mm

clear

Show

alphabetically (A-Z)

Irwin® 1897195 Construction Circular Saw Blade 180 X 30Mm X 24T Atb

15.97Buy!
£

PowerToolsDirect.com

Delivery: in United Kingdom

Report

The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge and the plate is fully hardened more→for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 2.5mm.Tooth Config: ATB.PTDIRW1897195

Bosch M14 Angle Grinder Backing Pad 180mm 2608601209

from £15.99 up to £20.95

Compare prices₆→

The Backing Pad is resistant to high temperatures and breakage. It provides low vibration during use, which increases its endurance. The pad is compatible with fibre sanding discs that include a nut a more→nd has a maximum speed of 13,300 rpm. It is intended for use with angle grinders.Backing Pad with M14 flange thread• Resistant to High Temperatures and Breakage• Backing Pad is resistant to high temperatures and breakage• Provides low vibration during use, which increases endurance• Compatible with fibre sanding discs that include a nutSpecifications:Diameter mm: 180

Bosch Standard Metal 180mm 3mm 22mm 2608603167

from £1.95 up to £1.99

Compare prices₆→

The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 180Bore diameter mm: 22,23Thickness mm: 3,0Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal

Bosch Expert A30S BF Flat Metal 180mm 2608600321

from £2.24 up to £2.49

Compare prices₆→

The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with demanding more→applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Use this disc for cutting metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders. Straight • Fast and Powerful Cutting Performance • Expert for Metal Cutting Disc provides powerful cutting performance with maximum safety • A premium aluminium oxide …

Bosch Zirconium Abrasive Flap Disc 180mm 40g

from £9.95

Compare prices₅→

The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-friable aluminium oxide grit is tough and wear-resistant for extensive metalwork. This product is intended for metal. The grit is bonded using fully synthetic resin for wear-resistance in heavy-duty applications on a backing material made of robust x-cloth for long-term use. The carrier plate is available in angled and straight, fibreglass and plastic versions. • Excellent Lifetime • X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding …

Bosch Professional Ceramic Diamond 180mm 2608602536

from £18.89 up to £19.99

Compare prices₆→

It is compatible with angle grinders. The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additio more→nally, the disc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles • High-quality standards ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 180 Bore diameter …

Bosch Professional Concave Hard Metal 180 Mm Thick Brush Cup Golden 260860

40.99Buy!
£

BricoINN

Delivery: in United Kingdom

Report

Specifications:- Type: Sanding disc- Bore size: 2.22 cm- Diameter: 18 cm

Bosch Standard Concrete Diamond 180mm 2608602199

from £21.95 up to £26.99

Compare prices₆→

The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. Bosch's diamond comp more→etence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. Pack of 1 • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards • Bosch´s diamond competence centre in Switzerland ensures consistent quality Specifications: Diameter mm: 180 Bore diameter mm: 2…

Bosch Diamond for Ceramic , Porcelain and Stone 180mm 2608602

from £19.99 up to £21.95

Compare prices₅→

It is compatible with angle grinders. The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additio more→nally, the disc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. Pack of 1 • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles • High-quality standards ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 180 Bore …

Bosch Professional Mm Mu H 180x30-48 Circular Saw Blade Silver 2608640507

from £28.50 up to £36.99

Compare prices₇→

The Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials. Its high-quality precision-ground carbide teeth make the blade robust enough for cutting various materials, w more→hile its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade´s expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in non-ferrous metals, aluminium, plastics, epoxy and wood. The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials.

Bosch Expert Diamond Metal 180mm 2608900535

from £26.22 up to £48.95

Compare prices₆→

Lasts up to 30x longer than a bonded cutting discCutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell o more→f bonded discs burning away while they cut. With the Expert Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs.The Expert Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no chem…

Bosch Ceramic Diamond 180mm 2608602

from £47.95 up to £49.99

Compare prices₆→

The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionall more→y, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications: Diameter mm: 180 Bore diameter mm: 25.40 Cutting width mm: 2,2 Segment height mm: 10 Materials: Stone Materials in Detail: Stoneware …

Bosch Professional Op Wo H 180x30-24 Multimaterial Circular Disc Silver 26

from £19.81 up to £25.99

Compare prices₇→

Multimaterial Circular DiscSpecifications:- Suitable For Materials: Wood- Blade Diameter: 18 Cm- Thickness: 1.6 Mm- Bore Size: 3 Cm- Number Of Teeth: 24- Cutting Width: 2.6 Mm- Circular Saw Blade Toot more→h Shape: Atb (Alternate Top Bevel)- Cutting Result: 2

Bosch Professional Op Wo H 180x30-36 Multimaterial Circular Disc Silver 26

from £22.99 up to £29.99

Compare prices₃→

Optiline Wood circular saw bladeSpecifications:- Suitable for materials: Wood- Blade diameter: 18 cm- Thickness: 1,6 mm- Bore size: 3 cm- Number of teeth: 36- Cutting width: 2,6 mm- Circular saw blade more→tooth shape: ATB (Alternate Top Bevel)- Cutting result: 3

Bosch Zirconium Abrasive Flap Disc 180mm 60g

from £9.95

Compare prices₅→

Bosch Zirconium Abrasive Flap Disc 180mm 80g

from £8.95

Compare prices₅→

Bosch A30T BF Drepressed Centre Metal Grinding Disc 180mm 2608600315

from £4.49 up to £4.69

Compare prices₅→

It is suitable for use with hand-held angle grinders. The Expert for Metal Grinding Disc delivers an impressively long lifetime on metal with maximum safety. Its premium aluminium oxide abrasive grain more→, selected functional fillers and additives in a modern phenol resin bond matrix are particularly suited for metal applications. Furthermore, its precision-manufactured fibreglass fabric ensures especially high disc stability and maximum work safety. It is intended for grinding metal. • Impressive Long Lifetime with Maximum Safety • Expert for Metal Grinding Disc for an impressive long lifetime and maximum safety on metal • Aluminium oxide abrasive grain, functional fillers, additives …

Bosch Professional Straight Carbide 180 Mm Thick Brush Cup Golden 26086003

40.99Buy!
£

BricoINN

Delivery: in United Kingdom

Report

Tungsten Carbide Grinding HeadFeatures: - Excellent Removal Rate- Cleaning Small Areas At High Speeds On Stainless Steel, Aluminium Or Non-Ferrous Metal Surfaces, On Edges Or In GroovesSpecifications: more→- Diameter Mm: 180- Bore Diameter Mm: 22,23

Bosch Professional Universarl 180x22.23x2.4x10 Mm Diamond Cut Disc Golden

17.99Buy!
£

BricoINN

Delivery: in United Kingdom

Report

The BOSCH PROFESSIONAL Universal Diamond Cut Disc is a high-quality and versatile electric tool accessory. It is specifically designed for use with various electric tools, such as angle grinders and c more→utoff machines. This disc has a diameter of 180mm, a center hole diameter of 22.23mm, a thickness of 2.4mm, and a segment height of 10mm.The disc is made from a durable and long-lasting black diamond material, which ensures superior cutting performance and precision. It is ideal for cutting through a wide range of materials, including concrete, masonry, stone, and tiles. The diamond segments on the disc provide efficient cutting action and excellent durability, even during heavy-duty use.The disc …

Clarke Clarke SCR180 Diamond Blade 180mm

9.59Buy!
£

MachineMart.co.uk

Delivery: to United Kingdom

Report

A sintered diamond cutting wheel suitable for wet cutting tiles.

DeWALT Extreme Diamond Metal 180mm DT40254

from £23.95

Compare prices₅→

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 180 mm • Thickness: 1.5 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

Dronco 180 x 22mm LT46 Laser Weld Diamond Blade

24.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

Dry or wet cutting diamond disc which is a laser-welded all-purpose segmented disc designed to cut construction-site materials. For use on concrete, exposed aggregate concrete, border stones.

Dronco 180 x 22mm Solid Tap Gen. Purpose Diamond Blade

12.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

U3 Perfect Line. Sintered, segmented diamond cutting blade designed to cut construction site materials with high effectiveness and a good price-performance ratio. Features and Benefits Excellent blade more→durability - built to last Diamond blade - cuts through even the toughest of materials with ease Typical Applications For use on all kinds of construction site materials, e.g. concrete, exposed aggregate concrete and bricks

Dronco A 24 R PERFECT Flat Metal 180mm Pack of 1

from £0.99 up to £1.49

Compare prices₃→

Dronco Perfect Line - The best-seller. Not only brilliant with its price/performance ratio. It has proven itself a million times. The perfect line shows best results on every angle grinder.Features & more→Benefits:• Resin bonded• Reinforced with glass fibre• Good lifetime• Good removal rateSpecifications:Disc diameter: 180 mmDisc thickness: 3 mmBore diameter: 22.2 mmApplication:All types of metal, primarily sheet steel, construction steel and welding seams.

24 more item(s)