Drill Bits

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 5.5mm • Drill Length: 93mm • He…

Dewalt DT4766 Extreme Impact Flatwood Drill Bit 16mm x 152mmThe Dewalt DT4766 has a 16mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. They have a robust steel shank for increased durability and chamfered outer cutting spurs for razor-sharp, clean precise drilling.Features:
- Ideal for door locks, electrical and plumbing work
- Designed for drilling in wooden materials
- Robust shank for greater durabilitySpecification:
- Cutting Diameter: 16mm 
- Length: 152mm
- Pack Quantity: 1

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 4.0mm • Overall Length: 105mm • Working Length: 43mm • Quantity: 1

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Faithfull Multi Construction Drill Bits are suitable for use in most materials encountered in the building industry. They can be used on brick, tile, concrete, metal, aluminium, wood and plastic, and are ideal for multi-layer materials. The diamond-ground carbide tip has advanced performance cutting edges for a long working life and the flute is designed for fast debris removal. Perfect for use in cordless drills when used on both rotary or hammer modes, dependent on the material being drilled (4mm bit rotary only).1 x Faithfull Multi Construction Drill Bit 7 x 100mmAdditional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.• 100mm: 1

Bosch 2608587587 SelfCut Flat Drill Bit with Hex Shank 38mm x 152mm The Bosch 2608587587 is a Flat Wood Drill Bit with a 38mm head size. Designed for drilling soft and hardwood as well as light building materials such as plasterboard. They are manufactured from specially hardened steel with precision ground tips and cutting edges for dimensionally accurate holes and are capable of drilling up to 5x faster than standard spade drill bits. Features:
- Flat Wood drill bits suitable for Hard Wood, Soft Wood, Plasterboard/Drywall
- The precision ground tip and cutting edges gives accurate dimensional stability during heavy drilling
- Drill up to 5 times faster than standard spade drills
- …

The CYL-9 MultiConstruction Drill Bit delivers stable drilling in all kinds of materials. Its centring tip provides a steady drilling start and good guidance universally. The diameter-optimised AWB brazing and hardening technology increases the robustness of the 2-cutter drill bit and reduces vibration during use. Additionally, the bit's 4-flute dura design with a reinforced core section delivers better wear resistance and stability when drilling soft concrete. The bit is intended for practically all materials in interior fitting work, e.g. soft concrete, masonry, brick, cement asbestos, light building materials, multilayer materials, ceramics and tiles, wood, plastic, sheet metals and aluminium.…

Wood drill bit set
5 piece set
Straight shank
4, 5, 6, 9 and 10mm bits

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 7mm • Drill Length: 109mm • He…

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 5.5mm • Total Length: …

Dewalt DT4767 Extreme Impact Flatwood Drill Bit 18mm x 152mmThe Dewalt DT4767 has a 18mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. Other features include a robust steel shank for increased durability and chamfered outer cutting spurs for clean, precise drilling.Features:
- Ideal for door locks, electrical and plumbing workSpecification:
- Cutting Diameter: 18mm 
- Length: 152mm
- Pack Quantity: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

With an innovative carbide tip design, Stanley SDS-PLUS masonry drill bits power through masonry, concrete, and more with high grade carbide tip that maximizes bit life. The unique flute design of this drill bit allows for efficient dust removal while drilling, resulting in cleaner holes and reduced clogging. This feature not only enhances productivity but also prolongs the lifespan of the drill bit. Featuring a carbide tip, the Stanley SDS Plus Masonry Drill Bit effortlessly penetrates tough surfaces with ease, delivering fast and accurate results every time. This precision drilling tool ensures minimal vibration, reducing user fatigue and ensuring optimal control during operation. Features …

Metal Drill Bit HSS-co 3, 3X65X36 MM 2
Tough and long-lasting
Original Dewalt quality

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 150 x 13mm (6 x 1/2in).Additional Information:• Length: 150mm (6in)• Width: 13mm (1/2in)

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood with minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. Features & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20607-QZ • Diameter: 5.5mm • Quantity: 1