Drill Bits

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-28 Flat Bit 28mmAdditional Information:• Diameter: 28mm• Overall Length: 152mm• Pack Qty.: 1

Octagonal shank chisel from selected steel with polished cutting edge. Sold loose.

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø18 x 235mmDimensions: Length: 10mm x Height: 300mmWeight: 0.19KgWarranty: Consumable

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 6.0mm • Overall Length: 123mm • Working Length: 57mm • Quantity: 1

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

The Stanley Flatwood Drill Bit is high quality combined with other hard materials with modern design. Quick drilling without the “drill” effect thanks to the special construction of the drill head. Clean CNC burr holes used in the production and unique tip design make this drill ideal for drilling in wood. With its superior construction, this drill bit ensures longevity and reliability throughout extensive use. The solid steel body offers enhanced strength and stability, resulting in a longer lifespan compared to other standard drill bits. Features & Benefits • Ground central point for accurate drilling • Cutting edges for fast, clean drilling • Hex shank prevents bit slipping in s…

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 16 mm Overall Length: 152 mmAdditional Information:• …

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.The Irwin Masonry Drill Bit for Cordless …

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

Advanced technology sets the STA53008 apart, ensuring precise and consistent results across a spectrum of tasks. Its ergonomic design ensures user comfort during prolonged use, providing a secure grip and precise control. Designed for efficiency and reliability, this Stanley accessory delivers top-notch results across diverse applications. Features & Benefits • For drilling into house bricks and masonry • For use in corded and cordless drills and impact drivers • Hex shank prevents bit slipping in standard drill chucks Specifications • Diameter: 4mm • Length: 101mm • Working Length: 50mm • Shank/Connection: Hex

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

• Ideal for general-purpose drilling into most masonry products. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø13 x 400mmDimensions: Length: 5mm x Height: 480mmWeight: 0.188KgWarranty: Consumable

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-26 Flat Bit 26mmAdditional Information:• Diameter: 26mm• Overall Length: 152mm• Pack Qty.: 1

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 6.5mm • Length: 200mm • Pack Quantity: 1Features & Benefits• For use with …

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curved surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

SDS Drill Bit 8x140x210mmC.K SDS Concrete Drill Bit 8x140x210mm~ Tungsten carbide tipped with optimized geometry for drilling concrete and stone~ Vacuum brazed tips for durability~ Ground flutes designed for optimum debris removal~ SDS-plus shank~ Diameter: 8 mm~ Working length: 140 mm~ Total length: 210 mmTechnical DataDiameter: 8mmWorking length: 140mmOverall length: 210mmComponent Material:Tungsten tipTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger …

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 8mm • Length: 120mm • Pack Quantity: 1Features & Benefits• For use with Concrete,…

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP500PRO Professional Jobber Drill Bits have the following specifications: Diameter: 5.0mm. Pack quantity: 2.Additional Information:• Tip Diameter: 5.0mm• Working Length: 50mm• Overall Length: 85mm• Pack Qty.: 2

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…