Drill Bits

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The Faithfull The High Carbon Steel (HCS) Hinge Bore Bit is specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. Available in 2 sizes. Suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF. High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always be used with a stand-mounted drill. The HCS hinge bores are available in 2 sizes.The Faithfull FAIHBB26HCS HCS Hinge Bore Bit has the following dimensions: Size: 26mm diameter x 60mm long x 8mm shank.Additional Information:• Diameter: 26mm• …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Roughneck Cold Chisels are manufactured from drop forged, heat treated steel for strength and durability. They feature powder coated with polished tips for greater corrosion resistance. Supplied with tip protectors.The Roughneck ROU31979 Cold Chisel 203 x 25mm (8 x 1in) 19mm ShankAdditional Information:• Length: 200mm (8in)• Width: 25mm (1in)

IRWIN Blue Groove 6X Drill Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 25 mm.Length : 165 mm.Additional Information:• Diameter: 25mm• Overall Length: 165mm• Pack Qty.: 1

The Stanley drill bit is used in conjunction with drills. They have a carbide tip that ensures durability. The shank of the tooling is securely fixed in the tool holder and is used for efficient drilling of tiles and glass. With its ultra sharp cutting edges, this drill bit effortlessly creates clean, smooth holes without chipping or cracking the fragile surface. Features & Benefits • Pointed carbide tip drills on contact for precise drilling • For use with corded and cordless drills • For use on ceramic tiles, glazed tiles, and non-toughened glass Specifications • Diameter: 7mm • Product Length: 77mm • Head Type: Tungsten Carbide • Shank: Round

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 19 • Overall Length Metric: 152

Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed.

Ground cutting edges and octagonal shank. For levering up and cutting through the tongues and grooves of floorboards. Display packed.

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

Full length bevel edged blades manufactured from carbon steel hardened, tempered, finely ground and clear lacquer coated for corrosion protection. Impact - resistant polypropylene handles. All blades have blade guards. Display packed.

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 160mm Diameter: 14mm Flute length: 99mmAdditional Information:• …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø18 x 300mmDimensions: Length: 10mm x Height: 355mmWeight: 0.274KgWarranty: Consumable

The Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. They can be used on concrete and masonry and have a grey sandblasted professional finish. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.1 x Irwin Speedhammer Plus Flat Chisel 20mm Length 250mmAdditional Information:• Type: Flat Chisel• Size: 20 x 250mm

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø25 x 235mmDimensions: Length: 20mm x Height: 300mmWeight: 0.324KgWarranty: Consumable

• Fully ground HSS Cobalt drill bit manufactured to DIN 338.• 5% Cobalt helps to increase life of drill bit.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf clearance.• Suitable for drilling high carbon steel and stainless steel.• High-density case for safe storage.Fully ground HSS Cobalt drill bit manufactured to DIN 338. 5% Cobalt gives increased heat hardness which helps extend the life of the drill bit. 135° Split point is self-centring which helps to reduce thrust and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for drilling high carbon and stainless steel. High-density case for safe storage.• Fully ground HSS Cob…

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size: 11.0 x 142mm.Working Length: 92mmAdditional Information:• Tip Diameter: 11.0mm• Working Length: 92mm• Overall Length: 142mm• Pack Qty.: 1

• Suitable for drilling out spot welds on most common vehicle panels including galvanized and high stress steels.• Made from HSS with 5% Cobalt for longer life.Suitable for drilling out spot welds on most common vehicle panels including galvanized and high stress steels. Made from HSS with 5% Cobalt for longer life.• Suitable for drilling out spot welds on most common vehicle panels including galvanized and high stress steels. • Made from HSS with 5% Cobalt for longer life. • Model No. AK4734Technical Specification:Length: 80mmNett Weight: 0.03kgSize: ø8mmDimensions: Length: 20mm x Height: 90mmWeight: 0.043KgWarranty: Consumable

• Superior quality auger wood drill bit has the SDS Plus shank.• Ideal for use with 2kg SDS Plus drills with hammer action switched off.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has the SDS Plus shank. Ideal for use with 2kg SDS Plus drills with hammer action switched off. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø25 x 235mmDimensions: Length: 15mm x Height: 295mmWeight: 0.31KgWarranty: Consumable