Bike Lights

The Magicshine MJ-6290 Brose Light Connection Cable enables seamless integration of Magicshine front bike lights with Brose motor systems. By facilitating this connection, it allows for the direct use of the bike's power to energise the lights, ensuring that cyclists have a reliable and consistent source of illumination. This cable is specifically designed to work with the MJ-900S, MJ-902S, and MJ-906S models, requiring them to be switched to e-bike mode before use. With a length of 75cm, it offers ample flexibility for installation and routing on various bike frames.Here's what makes the Magicshine MJ-6290 stand out:E-bike Mode Activation: By pressing and holding the power switch for 8

The Magicshine MJ-6290 Shimano Light Connection Cable allows you to seamlessly integrate your Magicshine front bike lights with Shimano drives, ensuring a smooth transition to e-bike mode for enhanced visibility. With a simple activation process (holding the power switch for 8 seconds), this cable makes it easy to connect your MJ-900SE, MJ-902SE, MJ-906SE, ME 1000, or ME 2000 front bike lights to your bike's Shimano drive system, allowing for automatic light output adjustment based on the input voltage range of 6-12V and enabling the ambient light sensor when in e-bike mode.Discover the key features of the Magicshine MJ-6290 Shimano Light Connection Cable:E-bike Mode Activation: Holding the

The Magicshine MJ-6290 Yamaha Light Connection Cable is designed to seamlessly integrate Magicshine front bike lights with Yamaha e-bike systems, enhancing your night-time cycling experience. This cable allows for the connection of Magicshine's MJ-900SE, MJ-902SE, MJ-906SE, ME 1000, and ME 2000 front lights to Yamaha drives, ensuring that your path is well-lit with a reliable and steady light source. Before use, lights must be switched to e-bike mode by pressing and holding the power switch for eight seconds, activating features specifically designed for e-bike compatibility.Here are the key features and benefits you can expect from this product:E-bike Mode Activation: By holding the power

Brand: SIGMA,. Features: Model: Cuberider I SW BATT. Rücklicht. Features: StVZO Approval holds bikes weighing up to 11 Kgenergie source: battery – Colour: Black, lighting: Light Source:

An easy to mount design for Exposure helmet lights such as the Switch, Spark, Sirius, Joystick, Axis and Diablo. This Exposure Lights mount quickly attaches to your handlebars with ease and securely holds your Exposure light in place. Not compatible with some aero road handlebars. Includes bracket and rubber band.

Basta luggage carrier tail light ray steady " Distance between screws: 50 mm LED tail light, parking light function (6 min.) Charging time: Capacitor: 2 minutes at 15 Km/h, LED, integrated Z Reflector with over 100,000 hours burn time Double Cable Connection, shock-proof plastic reflector and light/with fixing screws

Basta LED Tail Light, go steady " For mounting on mudguard (or optional fastening with colour mount 310.580/6, not included in box contents) With stand light function (4 min.) Double Cable Connection, shock-proof plastic reflector and light Charging time: Capacitor: 2 minutes at 15 Km/h, LED with over 100,000 hours burn time each

The Bontrager SyncV2 lamp mount is an universal mount with an elastic strap, suited for the Bontrager ION headlights. Bontrager Sync V2 Bracket Features Compatible with all Flare taillights and Ion headlights from both Trek and Bontrager Fits most bars/seatposts (22.2-31.8mm), some helmets and Madone integrated seat masts Silicone body with a tooled adjustment handlebar clamp diameter 20 degree +/- side-to-side adjustment 16 degree seatpost angle adjustment integrated into SyncV2 bracket

INTEGRATED CLIP Remove the light from the magnetic mount and clip it onto your shirt shorts socks or bags using the integrated wearable clip LIGHT MODES Steady pulse strobe fancy flash eco flash INTEGRATED USB PLUG No charging cable required plugs directly into USB ports & is designed to be exposed to the elements CHARGE TIME 4 hours (LED will turn off when fully charged) 100% WATERPROOF The Plus (+) is IP67 tested and 100% waterproof against all elements

Safety Light / LED / 40 Lumen / USB Charger

  The compact Merak offers great additional visibility on the bike with 40 lumens of light output at the front and 15 at the rear the Merak is the perfect light for the urban commuter. They may be small, but they certainly pack a punch. Light the way you ride on with Moon's Merak set, including a front and rear light. Light mode memory  Auto safe mode Quick release magnetic bracket (front) Quick release universal bracket (rear) Belt clip design (rear) Side visibility Water reistant (IPX4) LED: Ultra bright white LED Battery type: CR2032 x 2 Front Light Barcode: 4897029983607 Rear Light Barcode: 4897029983591 This listing is for a set of both front and rear lights

Lighting - Bike lights.BIKEFUN Velo light set.Front and rear light set compatible with oops bike.

The Exposure Lights Blaze Bolt On Rack Mount is a versatile bracket that s perfect for avid cyclists, providing a secure fitment for your Blaze rear light to a rack bolt mount. Whether it's daily commuting or adventurous trail riding, this accessory ensures safety and simplicity.Enhanced Safety: Attaches to rack bolt mount, allowing you to mount your Blaze rear light for increased visibility on the road.Compatibility: Compatible with Blaze DB and Blaze ReAKT, offering flexibility and adaptability to different lighting options.Effortless Installation: The straightforward attachment process enables you to quickly set up your rear light without hassle.Robust Durability: Engineered for

Bracket allows fitment of your Boost-R light to a rack bolt mount.Product Compatibility: Boost-R DB Boost-R ReAKT

Safety Light / LED / 20 Lumen / Waterproof / Battery / Light Duration (High) 4 h

Tooo Cycling mounting bracket for the DVR80 Camera Light Combo is designed to be simple and rugged. It fits to all bicycle seat posts, rear racks or front suspension forks to any bicycle on the market. The inner area is rubberised to prevent sliding on any metal, carbon or fibre bike part where you would mount the DVR80.