Car Subwoofers Mystery MDD-6220S  all car subwoofers →

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Car Subwoofer Speaker / Diameter 254 mm / 10 Inch / Mounting Depth 89 mm / 600 watt / Nominal Load 300 Watt / 83 dB / Impedance 2 x 4 Ohm

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Boxed Subwoofer / Diameter 270 mm / 11 Inch / 300 watt / Impedance 4 x 4 Ohm

300 Watts RMS 1300 Watts Max PP Cone Rubber Surround Steel Basket

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Woofer / Mounting Depth 85 mm / 200 watt / Nominal Load 100 Watt / 83 dB / Impedance 8 Ohm

Gehäusesubwoofer

Optimally blended pulp cone reproduces natural sound with a smooth frequency response Rubber surround supports the linear movement while reducing unwanted resonance Powerful strontium magnet precisely drives the cone and delivers clear sound Wide sound dispersion expands the listening sweet spot Unique fixture provides flexible mounting options, designed to fit a variety of locations

Boxed Subwoofer / Nominal Load 300 Watt / Impedance 4 Ohm

12-inch subwoofer with 4-ohm voice coil 750 watts max power. 250 watts RMS power Polypropylene and mica cone with poly-foam surround Progressive Wavelet Ribs cone keeps distortion low Progressive polyester spider increases the accuracy of the subwoofer cone motion

High Quality Caraudio Enjoy the best music experience Excellent Sound Quality

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

Car Subwoofer Speaker / Diameter 300 mm / 12 Inch / 300 watt / Nominal Load 150 Watt / Impedance 1 x 4 Ohm

Spoked Subwoofer Grille designed for Kicker Comp,CompVT, CompVR, CompVX, and Solo Classic subwoofers series Simple installation Stylish black metallic finish Protects exposed Subwoofer from potential damage Dimensions: 10" (25cm)

SSI (Selectable Smart Impedance): the exclusive dual impedance switch allows a variety of system configurations when one or more subwoofers are used International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Boxed Subwoofer / Diameter 200 mm / 8 Inch / 250 watt / Impedance 1 x 4 Ohm

Affordable big-bass performance - without taking up lots of room in your trunk or cargo area. Tough as nails. Load your cargo right on top of the sub for extra space – with plenty of bass! Full perimeter venting and UniPlate back plate and pole piece Stiff, injection-molded cone with 360-degree back bracing Utilizes extensive internal bracing, thick MDF construction and custom embroidery

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo