Drill Bits

Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length Metric: 78 • Bearing Dia Metric: 19 • Angle: 90

Blades that can be rotated in 90 degree increments giving three extra new edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 12 • Overall Length Metric: 52 • Bearing Dia Metric: 19 • Angle: 90

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 40 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 38 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 25 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 20 • Overall Length Metric: 92 • Type or Grade: TCT

Trend SNAP/SB5/SET Bit Set Colour Ring Torsion Zone 15 Piece The SNAP/SB5/SET is an assorted screwdriver bit set for a wide range of applications. With colour rings on the bit shanks to denote type for ease of identification. The set contains fourteen 25mm insert bits which feature a torsion zone to minimise the possibility of breakage. Made of high grade hardened tool steel. Includes a magnetic bit holder. Supplied in flip lid storage case with belt clip. Contains: 1 x Magnetic bit holder 14pcs 25mm insert bits: 2 x Phillips (No.1 & 2) - Red ring 2 x Pozi (No.1 & 2) - Blue ring 2 x Slotted (4mm x 0.6mm & 6mm x 0.9mm) - Red/Orange ring 3 x Hex (3mm, 4mm & 5mm A/F) - Yellow/Orange ring 5 …

Trend Snappy Replacement Drills - 10 pack 9/64in Diameter For use with Trend Snappy Imperial Drill Countersink Ref: SNAP/CS/12 & SNAP/CS/10H Replacement drills for piloting work using Imperial No10 screws in hardwood and No12 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation. Specifications: • Dia Metric: 3.5 • Dia Imperial: 9/64 • Overall Length Metric: 75.5 • Pack Qty: 10 pack

Trend Snappy Replacement Drills - 10 pack 7/64in Diameter For use with Trend Snappy Imperial Drill Countersink Ref: SNAP/CS/8 Replacement drills for piloting work using Imperial No6 screws in hardwood and No8 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation. Specifications: • Dia Metric: 2.75 • Dia Imperial: 7/64 • Overall Length Metric: 68.5 • Pack Qty: 10 pack

Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube. Specifications: • Dia Metric: 1.98 • Dia Imperial: 5/64 • Overall Length Metric: 52.5 • Pack Qty: 10 pack

Trend Snappy Replacement Drills - 10 pack 3/32in Diameter For use with Trend Snappy Imperial Drill Countersink Ref: SNAP/CS/6 Replacement drills for piloting work using Imperial No6 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation. Specifications: • Dia Metric: 2.38 • Dia Imperial: 3/32 • Overall Length Metric: 60 • Pack Qty: 10 pack

Trend Snappy Replacement Drills - 10 pack 1/8in Diameter Trend Snappy Replacement Drills - 10 pack 1/8in Diameter For use with Trend Snappy Imperial Drill Countersinks Refs: SNAP/CS/1814, SNAP/CS/10 & SNAP/CS/10A Replacement drills for piloting work using Imperial No8 screws in hardwood and No10 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation.

Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 13 • Overall Length Metric: 155

Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 10 • Overall Length Metric: 155

Trend Snappy Tubular Plug Cutter - 9.5mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Resharpenable design for long lifespan. Recommended for use in a pillar drill." Cuts parallel, clean, smooth and consistent 9.5mm diameter plugs for plugging matching diameter screw holes in matching or contrasting timbers. Compatible with Trend Snappy countersink and counterbores Ref.SNAP/CS/4, SNAP/CS/6, SNAP/CS/8, SNAP/CS/10, SNAP/CS/10H, SNAP/CS/7C, SNAP/CS/9C, NAP/CS/4TC, SNAP/CS/6TC, SNAP/CS/8TC ,SNAP/CS/10TC, SNAP/CB/1TC, SNAP/CB/2TC Cuts longer plugs allowing more that one hole to be plugged from a single plug for increased productivity. Trend Snappy Quick Chuck …

Trend Snappy Tubular Plug Cutter - 12mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Cuts parallel, clean, smooth and consistent 12mm diameter plugs for plugging matching diameter screw holes in matching or contrasting timbers. Cuts longer plugs allowing more that one hole to be plugged from a single plug for increased productivity. Resharpenable design for long lifespan.Recommended for use in a pillar drill. Trend Snappy Quick Chuck compatible shank for fast swaps between other Snappy accessories. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 12

Trend Snappy Tubular Plug Cutter - 12.7mm Diameter Made from Tool Steel for durable performance in hard and softwoods.Resharpenable design for long lifespan. Recommended for use in a pillar drill. Cuts parallel, clean, smooth and consistent 12.7mm diameter plugs for plugging matching diameter screw holes in matching or contrasting timbers. Compatible with Trend Snappy countersink and counterbores Ref. SNAP/CS/10A, SNAP/CS/12, SNAP/CS/12TC, SNAP/CB/3TC SNAP/CB/4TC Cuts longer plugs allowing more that one hole to be plugged from a single plug for increased productivity. Trend Snappy Quick Chuck compatible shank for fast swaps between other Snappy accessories. Specifications: • Shank …

Trend Snappy Tubular Plug Cutter - 10mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Cuts parallel, clean, smooth and consistent 10mm diameter plugs for plugging matching diameter screw holes in matching or contrasting timbers. Cuts longer plugs allowing more that one hole to be plugged from a single plug for increased productivity. Resharpenable design for long lifespan. Recommended for use in a pillar drill." Trend Snappy Quick Chuck compatible shank for fast swaps between other Snappy accessories. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 10

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Specifications: • Shank Diameter: 1/4 hexmm • Dia Metric: 7

Trend Snappy Glass Drill - 6mm Diameter Perfect for drilling through glass, porcelain, ceramic tiles and mirrors. (Not suitable for toughened glass) Drills 6mm diameter holes allowing fixings to be inserted without cracking or breaking the fixture. Used on a low speed drill with minimal pressure to engage the workpiece without slipping, the cutter leaves clean, smooth holes. Used with a coolant to aid cutting performance and prevent damage to the workpiece. High quality TCT (Tungsten Carbide Tipped) bit for durable, quick and clean performance across all materials. Specifications: • Shank Diameter: 1/4 hexmm • Dia Metric: 6

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. D: 3 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hexmm Dia Metric: 3

Replacement drill bit. Specifications: • Dia Metric: 7 • Overall Length Metric: 100