Car Pumps & Compressors

A Jobe Heavy Duty pump inflates a Hotseat towable in only 45 seconds. This pump works especially well on larger tubes, which can be a heavy duty to inflate properly. Our superfast Jobe Heavy Duty pump includes a luxurious Halkey Roberts nozzle and inflates and deflates. Start your work out on the water, instead of the land.
Halkey roberts nozzle
Inflates and deflates
Type : Electric Pump
Made in : China
Material : Plastic
UK/EU Power supply included : No
Dimensions : 21,5 x 18 x 16 cm
Power Supply : 230V
Voltage : 230 V
Pressure : 2,7 PSI
Colour : Black

• Fitted with high efficiency 50:1 air motor.• Workshop tested reliability.• Supplied with safety regulator to prevent over pressurisation of pump unit.• Fitted with a follower plate to prevent pump unit cavitation and ensure a smooth flow of grease.• Includes SAE100R2AT rated grease hose, z-swivel, control valve and bucket trolley. (Grease bucket not included).Fitted with high efficiency 50:1 air motor. Workshop tested reliability. Supplied with safety regulator to prevent over pressurisation of pump unit. Fitted with a follower plate to prevent pump unit cavitation and ensure a smooth flow of grease. Includes SAE100R2AT rated grease hose, z-swivel, control valve and bucket trolley.• Fitted w…

• Fabricated steel container with powder coated finish and spring-cap lid.• Rotary type pump with clear, plastic tube delivers and retrieves oils and fluids.• Fitted with rigid extension and hanging peg.• Suitable for gear oil and fluids with similar viscosity.• Made in UK.Fabricated steel container with powder coated finish and spring-cap lid. Rotary type pump with clear, plastic tube delivers and retrieves oils and fluids. Fitted with rigid extension and hanging peg. Suitable for gear oil and fluids with similar viscosity.• Fabricated steel container with powder coated finish and spring-cap lid. • Rotary type pump, with clear plastic tube, delivers and retrieves oils and fluids. • Fitted with…

• Designed to be used on the low pressure fuel circuit on commercial vehicles, to reintroduce fuel back up to the fuel line after maintenance.Designed to be used on the low pressure fuel circuit on commercial vehicles, to reintroduce fuel back up to the fuel line after maintenance.• Designed to be used on the low pressure fuel circuit on commercial vehicles, to reintroduce fuel back up to the fuel line after maintenance. • Model No. VS071Technical Specification:Hose Bore: ø10-14mmNett Weight: 0.18kgDimensions: Length: 60mm x Height: 165mmWeight: 0.202KgWarranty: 1 year

• Professional steel framed foot pump with two ø50 x 120mm steel barrels.• Features large metal pedal for easy operation and control.• Easy-to-read dial type pressure gauge calibrated in psi and bar, ranges from 0-100psi and 0-7bar.• Fitted with 1020mm flexible pressure hose with locking connector.• Supplied with accessories for inflating items such as small inflatable boats, air beds and balls.Professional steel framed foot pump with two ø50 x 120mm steel barrels. Features large metal pedal for easy operation and control. Easy-to-read dial type pressure gauge calibrated in psi and bar, ranges from 0-100psi and 0-7bar. Fitted with 1020mm flexible pressure hose with locking connector.…

A handy pump with a set of nozzle to fit inflatable boats, SUP, towables and airbeds and most other inflatable stuff.
Halkey Roberts Valve
4 different nozzles to fit most valves
Capacity 2000cm3
Made in : China
Capacity : 2 L
UK/EU Power supply included : No
Type : Foot Pump
Colour : Black
Material : Plastic
Colour : Yellow

• Brass constructed pump suitable for syphoning a variety of fluids including oils, coolants, transmission fluid, diesel and antifreeze.• Fitted with removable neoprene end caps.• Supplied with 1m x 6mm intake hose and 600mm x 12mm discharge hose.• Ideal for draining gearboxes and differentials.• Delivers approximately 100ml per stroke.Brass constructed pump suitable for syphoning a variety of fluids including oils, coolants, transmission fluid, diesel and antifreeze. Fitted with removable neoprene end caps. Supplied with 1m x 6mm intake hose and 600mm x 12mm discharge hose. Ideal for draining gearboxes and differentials. Delivers approximately 100ml per stroke.• Brass constructed pump suitabl…

FEATURES:For inflating tents.Built-in pressure gauge to ensure right pressure.Hose connected to base of pump.Sturdy aluminum shaft.1.2m 20mm dia.EVA hose.Sturdy LDPE body.Max presure 1bar/14.5psi.Suitable for all Outwell tents.Adaptor included for inflation of mats/beds, furniture, toys and other/older tents.Weight:0.9 kg.

There is no product description for this article at the moment.

3-Way Fuel Pipe to Pump A6110707632 for Mercedes Benz Sprinter Diesel 2000-2006 Only for OM611 Engines! With: O-Rings, Horse Shoe Clips Included Replacement part for OEM: A6110707632 Fits: Mercedes Benz Sprinter Diesel 2000-2006 Only for OM611 Engines! With: O-Rings, Horse Shoe Clips Included is warranted that his products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

• Fitted with fuse for protection, with a silenced motor keeping noise to a minimum.• Telescopic suction tube features a stainless steel filter at the base of the tube, preventing foreign matter from entering the motor.• Pump housing features a convenient holder for storing the dispensing nozzle.• Includes 230V mains adaptor and 12V battery clips allowing user to operate unit with whichever supply is available.• Supplied with a 2"BSP adaptor, 2m hose and manual dispensing nozzle with spout.• Suitable for diesel, water, AdBlue®, antifreeze, windscreen fluid, mild detergents, agricultural chemicals and light oils.Electric drum mounted pump designed for pumping diesel, AdBlue®, antifreeze, detergents, w…

Coleman® powerful pumps help to inflate and deflate your airbed quickly and easily. Several adapters allow you to also use these high-volume pumps for beach toys and other inflatables.Features:- Two separate functions: Inflates and deflates airbeds very quickly. 230V AC and 12V DC chargers included.- Double LockTM valve and pinch valve adapters included.- Ergonomic Coleman pump design.Specifications:- Runtime 20 minutes- Airflow 679 litres per minute- Head pressure 39 mBar- Features Adapters, hose and carry bag included- Weight 1.33 kg- Power cord 180 cm

With this universally applicable and stable standing air pump from Dunlop, the inflation of Car tires, bicycle tires, footballs and much more. Features: Smart and useful floor pump for blowing up a range of blow up item such as bike tyres, inflatables and toys Made by a trusted company in Dunlop. fixed to the floor and ensures a firm stand. Thanks to the pump head with two nozzles and air lock, you have no pressure loss when attaching the connector to the valve The various adapters and the long stroke ensure that almost all of your inflatable items are comfortably inflated. The hose holder enables space-saving and orderly storage Dunlop floor standing air pump Specifications: Universally applicable,…

• Self-priming high performance double diaphragm lever pump.• Heavy-duty die-cast aluminium pump head with stainless steel pistons and fuel resistant nitrile rubber diaphragm.• 2"BSP Connector and telescopic dip tube to suit 50 to 205L drums.• Approximately 800ml per full stroke discharge.• Supplied with 8ft anti-static discharge hose and delivery nozzle with holder.• Suitable for various oils, petrol, diesel, antifreeze, paraffin and other non-corrosive fluids.Self-priming high performance double diaphragm lever pump. Heavy-duty die-cast aluminium pump head with stainless steel pistons and fuel resistant nitrile rubber diaphragm. 2"BSP Connector and telescopic dip tube to suit 50 to 205L drum…

specifiche tecniche:Plastic 19 pompa.Con tubo a fisarmonica con 5 diversi ugelli per adattarsi maggior parte delle valvole.Pressione: fino a 1 bar (14,5PSI).Capacità: 2x2000cm3.

Suitable for Kampa awnings and tents, this double action hand pump inflates on the downward and upward strokes.Features:- Large 2 Litre capacity- Aluminum shaft- 4 fitting nozzlesSpecifications:General:- Scope of delivery 1 2L pump, 1 hose, 2 nozzles, 1 pressure gauge - Product Description Manual pump Dimensions:- Dimensions product depth: 9.06 - Dimensions product height: 17.91 - Dimensions product width: 4.53 - Net weight: 1.76 lbs

• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.• Auto-power-off after 8 seconds and auto-power-on once pressure is sensed, or air inflation starts.• 2.7m Flexible hose fitted with clip-on air connector.Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. Auto-power-off after 8 seconds and auto-power-on once pressure is sensed, or air inflation starts. 2.7m Flexible hose fitted with clip-on air connector.• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. • Auto-power-off after 8 seconds and auto-power-on once pressure is sensed,…

• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.• Auto-power-off after 8 seconds and auto-power-on once pressure is sensed, or air inflation starts.• 0.5m Flexible hose fitted with 240mm push-on air connector.Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. Auto-power-off after 8 seconds and auto-power-on once pressure is sensed, or air inflation starts. 0.5m Flexible hose fitted with 240mm push-on air connector.• Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator. • Auto-power-off after 8 seconds and auto-power-on once press…

Tyre Depth Gauge with a large, clear LCD display, making it easy to read. It allows zero setting at any position and has metric/imperial interchange.The gauge is suitable for checking tread depth, brake shoe and pad wear.Supplied with a CR2032 battery.Gauge Resolution: 0.01mm (0.0005in).Measuring Range: 0-25.4mm (0-1in). Features: Large, clear LCD display Allows zero setting at any position Metric/imperial interchange For checking tread depth, brake shoe and pad wear Battery supplied Specifications: Dimensions: H:16.0 x W:1.5 x D:10.0 cm Colour: Multi Guarantee:5 years Material: Multi Model Number: FAIAUDEPTH

• Robust and compact unit can be wall mounted.• Electric 24V pump with battery clips.• Pump housed in a die-cast aluminium casing.• Self-priming unit delivers up to 46L a minute of fluid.• 30 Minute duty cycle.• Suitable for filling diesel vehicles ‘in the field’.• Supplied with 4m of hose and manual delivery nozzle.• Includes on/off switch, carry handle, hose clamps (x4), hose tails (x3), mounting plate, PTFE tape and suction hose filter.• Features in-line fuse with two replacement fuses supplied.Electric transfer pump kit with battery clips. Pump housed in a die-cast aluminium casing. Suitable for filling diesel vehicles in the field. Self-priming unit delivers up to 46L a minute of fluid.…

• Robust and compact unit can be wall mounted.• Electric 12V pump with battery clips.• Pump housed in a die-cast aluminium casing.• Self-priming unit delivers up to 46L a minute of fluid.• 30 Minute duty cycle.• Suitable for filling diesel vehicles ‘in the field’.• Supplied with 4m of hose and manual delivery nozzle.• Includes on/off switch, carry handle, hose clamps (x4), hose tails (x3), mounting plate, PTFE tape and suction hose filter.• Features in-line fuse with two replacement fuses supplied.Electric transfer pump kit with battery clips. Pump housed in a die-cast aluminium casing. Suitable for filling diesel vehicles in the field. Self-priming unit delivers up to 46L a minute of fluid.…

• Digital tyre inflator with output of 12L/min.• Maximum Pressure: 120psi.• Pressure gauge reads psi, kPa, kg/cm² and bar.• 140mm Extension tube with Schrader connection.• Micro USB rechargeable (cable supplied).• USB output for charging mobile phone etc. (5V/2A).• Supplied with sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres.• Built-in 1W SMD LED for ease of use at night.• Preset the desired pressure, unit will stop automatically once pressure is reached.• Auto cut-out if hose kinks, to avoid damage to pump.Compact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents)…

• Compatible with many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose.• Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA397, SA399, SA37/93 and SA37/95.Compatible with many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose. Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA397, SA399, SA37/93 and SA37/95.• Compatible with many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose. • Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA397, SA399, SA37/93 and SA37/95. • Model No. SA37/C

• Zinc die-cast pump head with solid steel pump.• High-volume, low-pressure output for filling auto chassis lubrication reservoirs.• Central lube coupling with spare plug-in adaptor.• Suitable for 12.5kg grease buckets (not included).Zinc die-cast pump head with solid steel pump. High-volume, low-pressure output for filling auto chassis lubrication reservoirs. Central lube coupling supplied with spare plug-in adaptor.• Works on the high volume, low pressure process. • Designed for use on chassis. • Central lube coupling with spare plug-in adaptor. • Suitable for 12.5kg grease buckets (not included). • Model No. AK456Technical Specification:Delivery per Stroke: 33cm³Delivery Pressure: 900psiHos…